Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
support.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/apq8016-sbc-u-boot.dtsi | 11 +
arch/arm/dts/apq8016-sbc.dts | 729 +++++++++
arch/arm/dts/dragonboard410c-uboot.dtsi | 44 -
arch/arm/dts/dragonboard410c.dts | 221 ---
arch/arm/dts/msm8916.dtsi | 2702 +++++++++++++++++++++++++++++++
configs/dragonboard410c_defconfig | 2 +-
7 files changed, 3444 insertions(+), 267 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 92a4465f5f41..4c8b29b983a4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -628,7 +628,7 @@ dtb-$(CONFIG_TARGET_SL28) += fsl-ls1028a-kontron-sl28.dtb \
dtb-$(CONFIG_TARGET_TEN64) += fsl-ls1088a-ten64.dtb
-dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb \
+dtb-$(CONFIG_ARCH_SNAPDRAGON) += apq8016-sbc.dtb \
dragonboard820c.dtb \
sdm845-db845c.dtb \
sdm845-samsung-starqltechn.dtb \
diff --git a/arch/arm/dts/apq8016-sbc-u-boot.dtsi
b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
new file mode 100644
index 000000000000..838e629a8ade
--- /dev/null
+++ b/arch/arm/dts/apq8016-sbc-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024, Linaro Ltd.
+ */
+
+/ {
+ /* When running as a first-stage bootloader this isn't filled in
automatically */
+ memory@80000000 {
+ reg = <0 0x80000000 0 0x3da00000>;
+ };
+};
diff --git a/arch/arm/dts/apq8016-sbc.dts b/arch/arm/dts/apq8016-sbc.dts
new file mode 100644
index 000000000000..9ffad7d1f2b6
--- /dev/null
+++ b/arch/arm/dts/apq8016-sbc.dts
@@ -0,0 +1,729 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
+ compatible = "qcom,apq8016-sbc", "qcom,apq8016";
+
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ serial1 = &blsp_uart1;
+ usid0 = &pm8916_0;
+ i2c0 = &blsp_i2c2;
+ i2c1 = &blsp_i2c6;
+ i2c3 = &blsp_i2c4;
+ spi0 = &blsp_spi5;
+ spi1 = &blsp_spi3;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ reserved-memory {
+ ramoops@bff00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xbff00000 0x0 0x100000>;
+
+ record-size = <0x20000>;
+ console-size = <0x20000>;
+ ftrace-size = <0x20000>;
+ };
+ };
+
+ usb2513 {
+ compatible = "smsc,usb3503";
+ reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+ initial-mode = <1>;
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_id_default>;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7533_out>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&msm_key_volp_n_default>;
+
+ button {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tlmm_leds>,
+ <&pm8916_gpios_leds>,
+ <&pm8916_mpps_leds>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "apq8016-sbc:green:user1";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "apq8016-sbc:green:user2";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "apq8016-sbc:green:user3";
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "apq8016-sbc:green:user4";
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ panic-indicator;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "apq8016-sbc:yellow:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_YELLOW>;
+ gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "apq8016-sbc:blue:bt";
+ function = LED_FUNCTION_BLUETOOTH;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+};
+
+&blsp_i2c2 {
+ /* On Low speed expansion: LS-I2C0 */
+ status = "okay";
+};
+
+&blsp_i2c4 {
+ /* On High speed expansion: HS-I2C2 */
+ status = "okay";
+
+ adv_bridge: bridge@39 {
+ status = "okay";
+
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+ adi,dsi-lanes = <4>;
+ clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+ clock-names = "cec";
+
+ pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+ avdd-supply = <&pm8916_l6>;
+ a2vdd-supply = <&pm8916_l6>;
+ dvdd-supply = <&pm8916_l6>;
+ pvdd-supply = <&pm8916_l6>;
+ v1p2-supply = <&pm8916_l6>;
+ v3p3-supply = <&pm8916_l17>;
+
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+ pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7533_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7533_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&blsp_i2c6 {
+ /* On Low speed expansion: LS-I2C1 */
+ status = "okay";
+};
+
+&blsp_spi3 {
+ /* On High speed expansion: HS-SPI1 */
+ status = "okay";
+};
+
+&blsp_spi5 {
+ /* On Low speed expansion: LS-SPI0 */
+ status = "okay";
+};
+
+&blsp_uart1 {
+ status = "okay";
+ label = "LS-UART0";
+};
+
+&blsp_uart2 {
+ status = "okay";
+ label = "LS-UART1";
+};
+
+&camss {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&lpass {
+ status = "okay";
+};
+
+&lpass_codec {
+ status = "okay";
+};
+
+&mba_mem {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&adv7533_in>;
+};
+
+&mpss {
+ status = "okay";
+
+ firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
+};
+
+&mpss_mem {
+ status = "okay";
+ reg = <0x0 0x86800000 0x0 0x2b00000>;
+};
+
+&pm8916_codec {
+ status = "okay";
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
+&pm8916_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+ /*
+ * The 96Boards specification expects a 1.8V power rail on the low-speed
+ * expansion connector that is able to provide at least 0.18W / 100 mA.
+ * L15/L16 are connected in parallel to provide 55 mA each. A minimum
load
+ * must be specified to ensure the regulators are not put in LPM where
they
+ * would only provide 5 mA.
+ */
+ pm8916_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <50000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+ pm8916_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <50000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+ status = "okay";
+
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+ model = "DB410c";
+ audio-routing =
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ quaternary-dai-link {
+ link-name = "ADV7533";
+ cpu {
+ sound-dai = <&lpass MI2S_QUATERNARY>;
+ };
+ codec {
+ sound-dai = <&adv_bridge 0>;
+ };
+ };
+
+ primary-dai-link {
+ link-name = "WCD";
+ cpu {
+ sound-dai = <&lpass MI2S_PRIMARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+ };
+ };
+
+ tertiary-dai-link {
+ link-name = "WCD-Capture";
+ cpu {
+ sound-dai = <&lpass MI2S_TERTIARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+ extcon = <&usb_id>, <&usb_id>;
+
+ pinctrl-names = "default", "device";
+ pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+ pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&venus {
+ status = "okay";
+};
+
+&venus_mem {
+ status = "okay";
+};
+
+&wcnss {
+ status = "okay";
+ firmware-name = "qcom/apq8016/wcnss.mbn";
+};
+
+&wcnss_ctrl {
+ firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&blsp_i2c2_default {
+ drive-strength = <16>;
+};
+
+&blsp_i2c4_default {
+ drive-strength = <16>;
+};
+
+&blsp_i2c6_default {
+ drive-strength = <16>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+&tlmm {
+ gpio-line-names =
+ "[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+ "[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+ "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+ "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+ "[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+ "[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+ "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+ "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+ "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+ "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+ "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+ "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+ "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+ "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+ "[I2C3_SDA]", /* HSEC pin 38 */
+ "[I2C3_SCL]", /* HSEC pin 36 */
+ "[SPI0_MOSI]", /* LSEC pin 14 */
+ "[SPI0_MISO]", /* LSEC pin 10 */
+ "[SPI0_CS_N]", /* LSEC pin 12 */
+ "[SPI0_CLK]", /* LSEC pin 8 */
+ "HDMI_HPD_N", /* GPIO 20 */
+ "USR_LED_1_CTRL",
+ "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+ "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+ "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+ "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+ "[CSI0_MCLK]", /* HSEC pin 15 */
+ "[CSI1_MCLK]", /* HSEC pin 17 */
+ "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+ "[I2C2_SDA]", /* HSEC pin 34 */
+ "[I2C2_SCL]", /* HSEC pin 32 */
+ "DSI2HDMI_INT_N",
+ "DSI_SW_SEL_APQ",
+ "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+ "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+ "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+ "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+ "FORCED_USB_BOOT",
+ "SD_CARD_DET_N",
+ "[WCSS_BT_SSBI]",
+ "[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+ "[WCSS_WLAN_DATA_1]",
+ "[WCSS_WLAN_DATA_0]",
+ "[WCSS_WLAN_SET]",
+ "[WCSS_WLAN_CLK]",
+ "[WCSS_FM_SSBI]",
+ "[WCSS_FM_SDI]",
+ "[WCSS_BT_DAT_CTL]",
+ "[WCSS_BT_DAT_STB]",
+ "NC",
+ "NC", /* GPIO 50 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 60 */
+ "NC",
+ "NC",
+ "[CDC_PDM0_CLK]",
+ "[CDC_PDM0_SYNC]",
+ "[CDC_PDM0_TX0]",
+ "[CDC_PDM0_RX0]",
+ "[CDC_PDM0_RX1]",
+ "[CDC_PDM0_RX2]",
+ "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+ "NC", /* GPIO 70 */
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 74 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "BOOT_CONFIG_0", /* GPIO 80 */
+ "BOOT_CONFIG_1",
+ "BOOT_CONFIG_2",
+ "BOOT_CONFIG_3",
+ "NC",
+ "NC",
+ "BOOT_CONFIG_5",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 90 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO 100 */
+ "NC",
+ "NC",
+ "NC",
+ "SSBI_GPS",
+ "NC",
+ "NC",
+ "KEY_VOLP_N",
+ "NC",
+ "NC",
+ "[LS_EXP_MI2S_WS]", /* GPIO 110 */
+ "NC",
+ "NC",
+ "[LS_EXP_MI2S_SCK]",
+ "[LS_EXP_MI2S_DATA0]",
+ "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+ "NC",
+ "[DSI2HDMI_MI2S_WS]",
+ "[DSI2HDMI_MI2S_SCK]",
+ "[DSI2HDMI_MI2S_DATA0]",
+ "USR_LED_2_CTRL", /* GPIO 120 */
+ "SB_HS_ID";
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tlmm_leds: tlmm-leds-state {
+ pins = "gpio21", "gpio120";
+ function = "gpio";
+
+ output-low;
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio121";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ adv7533_int_active: adv533-int-active-state {
+ pins = "gpio31";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ adv7533_int_suspend: adv7533-int-suspend-state {
+ pins = "gpio31";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ adv7533_switch_active: adv7533-switch-active-state {
+ pins = "gpio32";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ adv7533_switch_suspend: adv7533-switch-suspend-state {
+ pins = "gpio32";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ msm_key_volp_n_default: msm-key-volp-n-default-state {
+ pins = "gpio107";
+ function = "gpio";
+
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&pm8916_gpios {
+ gpio-line-names =
+ "USR_LED_3_CTRL",
+ "USR_LED_4_CTRL",
+ "USB_HUB_RESET_N_PM",
+ "USB_SW_SEL_PM";
+
+ usb_hub_reset_pm: usb-hub-reset-pm-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+
+ input-disable;
+ output-high;
+ };
+
+ usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+
+ output-low;
+ };
+
+ usb_sw_sel_pm: usb-sw-sel-pm-state {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+
+ power-source = <PM8916_GPIO_VPH>;
+ input-disable;
+ output-high;
+ };
+
+ usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+
+ power-source = <PM8916_GPIO_VPH>;
+ input-disable;
+ output-low;
+ };
+
+ pm8916_gpios_leds: pm8916-gpios-leds-state {
+ pins = "gpio1", "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+
+ output-low;
+ };
+};
+
+&pm8916_mpps {
+ gpio-line-names =
+ "VDD_PX_BIAS",
+ "WLAN_LED_CTRL",
+ "BT_LED_CTRL",
+ "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ls_exp_gpio_f>;
+
+ ls_exp_gpio_f: pm8916-mpp4-state {
+ pins = "mpp4";
+ function = "digital";
+
+ output-low;
+ power-source = <PM8916_MPP_L5>; /* 1.8V */
+ };
+
+ pm8916_mpps_leds: pm8916-mpps-state {
+ pins = "mpp2", "mpp3";
+ function = "digital";
+
+ output-low;
+ };
+};
diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi
b/arch/arm/dts/dragonboard410c-uboot.dtsi
deleted file mode 100644
index cec64bf80f99..000000000000
--- a/arch/arm/dts/dragonboard410c-uboot.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * U-Boot addition to handle Dragonboard 410c pins
- *
- * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikow...@gmail.com>
- */
-
-/ {
-
- smem {
- bootph-all;
- };
-
- soc {
- bootph-all;
-
- pinctrl@1000000 {
- bootph-all;
-
- uart {
- bootph-all;
- };
- };
-
- qcom,gcc@1800000 {
- bootph-all;
- };
-
- serial@78b0000 {
- bootph-all;
- };
- };
-};
-
-
-&pm8916_gpios {
- usb_hub_reset_pm {
- gpios = <&pm8916_gpios 2 0>;
- };
-
- usb_sw_sel_pm {
- gpios = <&pm8916_gpios 3 0>;
- };
-};
diff --git a/arch/arm/dts/dragonboard410c.dts b/arch/arm/dts/dragonboard410c.dts
deleted file mode 100644
index 453642b25705..000000000000
--- a/arch/arm/dts/dragonboard410c.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Qualcomm APQ8016 based Dragonboard 410C board device tree source
- *
- * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikow...@gmail.com>
- */
-
-/dts-v1/;
-
-#include "skeleton64.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Qualcomm Technologies, Inc. Dragonboard 410c";
- compatible = "qcom,apq8016-sbc", "qcom,apq8016";
- qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
- qcom,board-id = <0x10018 0x0>;
- #address-cells = <0x2>;
- #size-cells = <0x2>;
-
- aliases {
- usb0 = "/soc/ehci@78d9000";
- };
-
- memory {
- device_type = "memory";
- reg = <0 0x80000000 0 0x3da00000>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- smem_mem: smem_region@86300000 {
- reg = <0x0 0x86300000 0x0 0x100000>;
- no-map;
- };
- };
-
- chosen {
- stdout-path = "/soc/serial@78b0000";
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- };
-
- soc {
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- ranges = <0x0 0x0 0x0 0xffffffff>;
- compatible = "simple-bus";
-
- rpm_msg_ram: memory@60000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x60000 0x8000>;
- };
-
- soc_gpios: pinctrl@1000000 {
- compatible = "qcom,msm8916-pinctrl";
- reg = <0x1000000 0x400000>;
- gpio-controller;
- gpio-count = <122>;
- gpio-bank-name="soc";
- #gpio-cells = <2>;
-
- blsp1_uart: uart {
- function = "blsp1_uart";
- pins = "GPIO_4", "GPIO_5";
- drive-strength = <8>;
- bias-disable;
- };
- };
- clkc: qcom,gcc@1800000 {
- compatible = "qcom,gcc-msm8916";
- reg = <0x1800000 0x80000>;
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- #clock-cells = <0x1>;
- };
-
- serial@78b0000 {
- compatible = "qcom,msm-uartdm-v1.4";
- reg = <0x78b0000 0x200>;
- clocks = <&clkc 4>;
- clock-names = "core";
- pinctrl-names = "uart";
- pinctrl-0 = <&blsp1_uart>;
- };
-
- ehci@78d9000 {
- compatible = "qcom,ci-hdrc";
- reg = <0x78d9000 0x400>;
- phys = <&ehci_phy>;
-
- ulpi {
- usb_hs_phy: phy {
- compatible = "qcom,usb-hs-phy-msm8916",
- "qcom,usb-hs-phy";
- #phy-cells = <0>;
- clocks = <&xo_board>, <&gcc
GCC_USB2A_PHY_SLEEP_CLK>;
- clock-names = "ref", "sleep";
- resets = <&gcc GCC_USB2A_PHY_BCR>,
<&usb 0>;
- reset-names = "phy", "por";
- qcom,init-seq = /bits/ 8 <0x0 0x44>,
- <0x1 0x6b>,
- <0x2 0x24>,
- <0x3 0x13>;
- };
- };
- };
-
- sdhci@07824000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x11c 0x7824000 0x800>;
- bus-width = <0x8>;
- index = <0x0>;
- non-removable;
- clock = <&clkc 0>;
- clock-frequency = <100000000>;
- };
-
- sdhci@07864000 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7864900 0x11c 0x7864000 0x800>;
- index = <0x1>;
- bus-width = <0x4>;
- clock = <&clkc 1>;
- clock-frequency = <200000000>;
- cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>;
- };
-
- wcnss {
- bt {
- compatible="qcom,wcnss-bt";
- };
-
- wifi {
- compatible="qcom,wcnss-wlan";
- };
- };
-
- spmi_bus: spmi@200f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0200f000 0x001000>,
- <0x02400000 0x400000>,
- <0x02c00000 0x400000>,
- <0x03800000 0x200000>,
- <0x0200a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- #address-cells = <0x1>;
- #size-cells = <0x1>;
- pmic0: pm8916@0 {
- compatible = "qcom,spmi-pmic";
- reg = <0x0 0x1>;
- #address-cells = <0x1>;
- #size-cells = <0x1>;
-
- pon@800 {
- compatible = "qcom,pm8916-pon";
- reg = <0x800 0x100>;
- mode-bootloader = <0x2>;
- mode-recovery = <0x1>;
-
- pwrkey {
- compatible =
"qcom,pm8941-pwrkey";
- debounce = <15625>;
- bias-pull-up;
- };
-
- pm8916_resin: resin {
- compatible =
"qcom,pm8941-resin";
- debounce = <15625>;
- bias-pull-up;
- };
- };
-
- pm8916_gpios: pm8916_gpios@c000 {
- compatible = "qcom,pm8916-gpio";
- reg = <0xc000 0x400>;
- gpio-controller;
- gpio-ranges = <&pm8916_gpios 0 0 4>;
- #gpio-cells = <2>;
- };
- };
-
- pmic1: pm8916@1 {
- compatible = "qcom,spmi-pmic";
- reg = <0x1 0x1>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- user1 {
- label = "green:user1";
- gpios = <&soc_gpios 21 0>;
- };
-
- user2 {
- label = "green:user2";
- gpios = <&soc_gpios 120 0>;
- };
-
- user3 {
- label = "green:user3";
- gpios = <&pm8916_gpios 0 0>;
- };
-
- user4 {
- label = "green:user4";
- gpios = <&pm8916_gpios 1 0>;
- };
- };
-};
-
-#include "dragonboard410c-uboot.dtsi"
diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi
new file mode 100644
index 000000000000..4f799b536a92
--- /dev/null
+++ b/arch/arm/dts/msm8916.dtsi
@@ -0,0 +1,2702 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tz-apps@86000000 {
+ reg = <0x0 0x86000000 0x0 0x300000>;
+ no-map;
+ };
+
+ smem@86300000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x86300000 0x0 0x100000>;
+ no-map;
+
+ hwlocks = <&tcsr_mutex 3>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ };
+
+ hypervisor@86400000 {
+ reg = <0x0 0x86400000 0x0 0x100000>;
+ no-map;
+ };
+
+ tz@86500000 {
+ reg = <0x0 0x86500000 0x0 0x180000>;
+ no-map;
+ };
+
+ reserved@86680000 {
+ reg = <0x0 0x86680000 0x0 0x80000>;
+ no-map;
+ };
+
+ rmtfs@86700000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0 0x86700000 0x0 0xe0000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ };
+
+ rfsa@867e0000 {
+ reg = <0x0 0x867e0000 0x0 0x20000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@86800000 {
+ /*
+ * The memory region for the mpss firmware is generally
+ * relocatable and could be allocated dynamically.
+ * However, many firmware versions tend to fail when
+ * loaded to some special addresses, so it is hard to
+ * define reliable alloc-ranges.
+ *
+ * alignment = <0x0 0x400000>;
+ * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+ */
+ reg = <0x0 0x86800000 0x0 0>; /* size is
device-specific */
+ no-map;
+ status = "disabled";
+ };
+
+ wcnss_mem: wcnss {
+ size = <0x0 0x600000>;
+ alignment = <0x0 0x100000>;
+ alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+ no-map;
+ status = "disabled";
+ };
+
+ venus_mem: venus {
+ size = <0x0 0x500000>;
+ alignment = <0x0 0x100000>;
+ alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+ no-map;
+ status = "disabled";
+ };
+
+ mba_mem: mba {
+ size = <0x0 0x100000>;
+ alignment = <0x0 0x100000>;
+ alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+ no-map;
+ status = "disabled";
+ };
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD0>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu0_acc>;
+ qcom,saw = <&cpu0_saw>;
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD1>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu1_acc>;
+ qcom,saw = <&cpu1_saw>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD2>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu2_acc>;
+ qcom,saw = <&cpu2_saw>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ clocks = <&apcs>;
+ operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
+ power-domains = <&CPU_PD3>;
+ power-domain-names = "psci";
+ qcom,acc = <&cpu3_acc>;
+ qcom,saw = <&cpu3_saw>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
+ arm,psci-suspend-param = <0x40000002>;
+ entry-latency-us = <130>;
+ exit-latency-us = <150>;
+ min-residency-us = <2000>;
+ local-timer-stop;
+ };
+ };
+
+ domain-idle-states {
+
+ CLUSTER_RET: cluster-retention {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000012>;
+ entry-latency-us = <500>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
+
+ CLUSTER_PWRDN: cluster-gdhs {
+ compatible = "domain-idle-state";
+ arm,psci-suspend-param = <0x41000032>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
+ };
+ };
+ };
+
+ cpu_opp_table: opp-table-cpu {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ opp-998400000 {
+ opp-hz = /bits/ 64 <998400000>;
+ };
+ };
+
+ firmware {
+ scm: scm {
+ compatible = "qcom,scm-msm8916", "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ #reset-cells = <1>;
+
+ qcom,dload-mode = <&tcsr 0x6100>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+
+ CPU_PD0: power-domain-cpu0 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CPU_PD1: power-domain-cpu1 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CPU_PD2: power-domain-cpu2 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CPU_PD3: power-domain-cpu3 {
+ #power-domain-cells = <0>;
+ power-domains = <&CLUSTER_PD>;
+ domain-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ CLUSTER_PD: power-domain-cluster {
+ #power-domain-cells = <0>;
+ domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+ };
+ };
+
+ rpm: remoteproc {
+ compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8916",
"qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8916-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 =
<&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible =
"operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <1>;
+ };
+ rpmpd_opp_svs_krait: opp2 {
+ opp-level = <2>;
+ };
+ rpmpd_opp_svs_soc: opp3 {
+ opp-level = <3>;
+ };
+ rpmpd_opp_nom: opp4 {
+ opp-level = <4>;
+ };
+ rpmpd_opp_turbo: opp5 {
+ opp-level = <5>;
+ };
+ rpmpd_opp_super_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ smp2p-hexagon {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ hexagon_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-wcnss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <451>, <431>;
+
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-1 = <&apcs 8 13>;
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ hexagon_smsm: hexagon@1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wcnss_smsm: wcnss@6 {
+ reg = <6>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ soc: soc@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
+
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x004ab000 0x4>;
+ };
+
+ qfprom: qfprom@5c000 {
+ compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+ reg = <0x0005c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tsens_base1: base1@d0 {
+ reg = <0xd0 0x1>;
+ bits = <0 7>;
+ };
+
+ tsens_s0_p1: s0-p1@d0 {
+ reg = <0xd0 0x2>;
+ bits = <7 5>;
+ };
+
+ tsens_s0_p2: s0-p2@d1 {
+ reg = <0xd1 0x2>;
+ bits = <4 5>;
+ };
+
+ tsens_s1_p1: s1-p1@d2 {
+ reg = <0xd2 0x1>;
+ bits = <1 5>;
+ };
+ tsens_s1_p2: s1-p2@d2 {
+ reg = <0xd2 0x2>;
+ bits = <6 5>;
+ };
+ tsens_s2_p1: s2-p1@d3 {
+ reg = <0xd3 0x1>;
+ bits = <3 5>;
+ };
+
+ tsens_s2_p2: s2-p2@d4 {
+ reg = <0xd4 0x1>;
+ bits = <0 5>;
+ };
+
+ // no tsens with hw_id 3
+
+ tsens_s4_p1: s4-p1@d4 {
+ reg = <0xd4 0x2>;
+ bits = <5 5>;
+ };
+
+ tsens_s4_p2: s4-p2@d5 {
+ reg = <0xd5 0x1>;
+ bits = <2 5>;
+ };
+
+ tsens_s5_p1: s5-p1@d5 {
+ reg = <0xd5 0x2>;
+ bits = <7 5>;
+ };
+
+ tsens_s5_p2: s5-p2@d6 {
+ reg = <0xd6 0x2>;
+ bits = <4 5>;
+ };
+
+ tsens_base2: base2@d7 {
+ reg = <0xd7 0x1>;
+ bits = <1 7>;
+ };
+
+ tsens_mode: mode@ef {
+ reg = <0xef 0x1>;
+ bits = <5 3>;
+ };
+ };
+
+ rpm_msg_ram: sram@60000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00060000 0x8000>;
+ };
+
+ sram@290000 {
+ compatible = "qcom,msm8916-rpm-stats";
+ reg = <0x00290000 0x10000>;
+ };
+
+ bimc: interconnect@400000 {
+ compatible = "qcom,msm8916-bimc";
+ reg = <0x00400000 0x62000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+
+ // no hw_id 3
+ nvmem-cells = <&tsens_mode>,
+ <&tsens_base1>, <&tsens_base2>,
+ <&tsens_s0_p1>, <&tsens_s0_p2>,
+ <&tsens_s1_p1>, <&tsens_s1_p2>,
+ <&tsens_s2_p1>, <&tsens_s2_p2>,
+ <&tsens_s4_p1>, <&tsens_s4_p2>,
+ <&tsens_s5_p1>, <&tsens_s5_p2>;
+ nvmem-cell-names = "mode",
+ "base1", "base2",
+ "s0_p1", "s0_p2",
+ "s1_p1", "s1_p2",
+ "s2_p1", "s2_p2",
+ "s4_p1", "s4_p2",
+ "s5_p1", "s5_p2";
+ #qcom,sensors = <5>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
+ };
+
+ pcnoc: interconnect@500000 {
+ compatible = "qcom,msm8916-pcnoc";
+ reg = <0x00500000 0x11000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
+ snoc: interconnect@580000 {
+ compatible = "qcom,msm8916-snoc";
+ reg = <0x00580000 0x14000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ stm: stm@802000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0x00802000 0x1000>,
+ <0x09280000 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint =
<&funnel0_in7>;
+ };
+ };
+ };
+ };
+
+ /* System CTIs */
+ /* CTI 0 - TMC connections */
+ cti0: cti@810000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00810000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ status = "disabled";
+ };
+
+ /* CTI 1 - TPIU connections */
+ cti1: cti@811000 {
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0x00811000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ status = "disabled";
+ };
+
+ /* CTIs 2-11 - no information - not instantiated */
+
+ tpiu: tpiu@820000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x00820000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint =
<&replicator_out1>;
+ };
+ };
+ };
+ };
+
+ funnel0: funnel@821000 {
+ compatible = "arm,coresight-dynamic-funnel",
"arm,primecell";
+ reg = <0x00821000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Not described input ports:
+ * 0 - connected to Resource and Power Manger
CPU ETM
+ * 1 - not-connected
+ * 2 - connected to Modem CPU ETM
+ * 3 - not-connected
+ * 5 - not-connected
+ * 6 - connected trought funnel to Wireless CPU
ETM
+ * 7 - connected to STM component
+ */
+
+ port@4 {
+ reg = <4>;
+ funnel0_in4: endpoint {
+ remote-endpoint =
<&funnel1_out>;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ funnel0_in7: endpoint {
+ remote-endpoint = <&stm_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel0_out: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+ };
+
+ replicator: replicator@824000 {
+ compatible = "arm,coresight-dynamic-replicator",
"arm,primecell";
+ reg = <0x00824000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint = <&etf_out>;
+ };
+ };
+ };
+ };
+
+ etf: etf@825000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00825000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint =
<&funnel0_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint =
<&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etr: etr@826000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x00826000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint =
<&replicator_out0>;
+ };
+ };
+ };
+ };
+
+ funnel1: funnel@841000 { /* APSS funnel only 4 inputs
are used */
+ compatible = "arm,coresight-dynamic-funnel",
"arm,primecell";
+ reg = <0x00841000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ status = "disabled";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel1_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ funnel1_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ funnel1_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ funnel1_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel1_out: endpoint {
+ remote-endpoint =
<&funnel0_in4>;
+ };
+ };
+ };
+ };
+
+ debug0: debug@850000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00850000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU0>;
+ status = "disabled";
+ };
+
+ debug1: debug@852000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00852000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU1>;
+ status = "disabled";
+ };
+
+ debug2: debug@854000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00854000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU2>;
+ status = "disabled";
+ };
+
+ debug3: debug@856000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x00856000 0x1000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&CPU3>;
+ status = "disabled";
+ };
+
+ /* Core CTIs; CTIs 12-15 */
+ /* CTI - CPU-0 */
+ cti12: cti@858000 {
+ compatible = "arm,coresight-cti-v8-arch",
"arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00858000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+ arm,cs-dev-assoc = <&etm0>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-1 */
+ cti13: cti@859000 {
+ compatible = "arm,coresight-cti-v8-arch",
"arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x00859000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+ arm,cs-dev-assoc = <&etm1>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-2 */
+ cti14: cti@85a000 {
+ compatible = "arm,coresight-cti-v8-arch",
"arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085a000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+ arm,cs-dev-assoc = <&etm2>;
+
+ status = "disabled";
+ };
+
+ /* CTI - CPU-3 */
+ cti15: cti@85b000 {
+ compatible = "arm,coresight-cti-v8-arch",
"arm,coresight-cti",
+ "arm,primecell";
+ reg = <0x0085b000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+ arm,cs-dev-assoc = <&etm3>;
+
+ status = "disabled";
+ };
+
+ etm0: etm@85c000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085c000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU0>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
<&funnel1_in0>;
+ };
+ };
+ };
+ };
+
+ etm1: etm@85d000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085d000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU1>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
<&funnel1_in1>;
+ };
+ };
+ };
+ };
+
+ etm2: etm@85e000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085e000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU2>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
<&funnel1_in2>;
+ };
+ };
+ };
+ };
+
+ etm3: etm@85f000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x0085f000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,coresight-loses-context-with-cpu;
+
+ cpu = <&CPU3>;
+
+ status = "disabled";
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
<&funnel1_in3>;
+ };
+ };
+ };
+ };
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 122>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp_i2c1_default: blsp-i2c1-default-state {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c1_sleep: blsp-i2c1-sleep-state {
+ pins = "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c2_default: blsp-i2c2-default-state {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c2_sleep: blsp-i2c2-sleep-state {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c3_default: blsp-i2c3-default-state {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c3_sleep: blsp-i2c3-sleep-state {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c4_default: blsp-i2c4-default-state {
+ pins = "gpio14", "gpio15";
+ function = "blsp_i2c4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c4_sleep: blsp-i2c4-sleep-state {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c5_default: blsp-i2c5-default-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp_i2c5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c5_sleep: blsp-i2c5-sleep-state {
+ pins = "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c6_default: blsp-i2c6-default-state {
+ pins = "gpio22", "gpio23";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_i2c6_sleep: blsp-i2c6-sleep-state {
+ pins = "gpio22", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp_spi1_default: blsp-spi1-default-state {
+ spi-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp_spi1_sleep: blsp-spi1-sleep-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_spi2_default: blsp-spi2-default-state {
+ spi-pins {
+ pins = "gpio4", "gpio5", "gpio7";
+ function = "blsp_spi2";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp_spi2_sleep: blsp-spi2-sleep-state {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_spi3_default: blsp-spi3-default-state {
+ spi-pins {
+ pins = "gpio8", "gpio9", "gpio11";
+ function = "blsp_spi3";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio10";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp_spi3_sleep: blsp-spi3-sleep-state {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_spi4_default: blsp-spi4-default-state {
+ spi-pins {
+ pins = "gpio12", "gpio13", "gpio15";
+ function = "blsp_spi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio14";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp_spi4_sleep: blsp-spi4-sleep-state {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_spi5_default: blsp-spi5-default-state {
+ spi-pins {
+ pins = "gpio16", "gpio17", "gpio19";
+ function = "blsp_spi5";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp_spi5_sleep: blsp-spi5-sleep-state {
+ pins = "gpio16", "gpio17", "gpio18", "gpio19";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_spi6_default: blsp-spi6-default-state {
+ spi-pins {
+ pins = "gpio20", "gpio21", "gpio23";
+ function = "blsp_spi6";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ cs-pins {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp_spi6_sleep: blsp-spi6-sleep-state {
+ pins = "gpio20", "gpio21", "gpio22", "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_uart1_default: blsp-uart1-default-state {
+ /* TX, RX, CTS_N, RTS_N */
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "blsp_uart1";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp_uart1_sleep: blsp-uart1-sleep-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp_uart2_default: blsp-uart2-default-state {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp_uart2_sleep: blsp-uart2-sleep-state {
+ pins = "gpio4", "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ camera_front_default: camera-front-default-state {
+ pwdn-pins {
+ pins = "gpio33";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ rst-pins {
+ pins = "gpio28";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ mclk1-pins {
+ pins = "gpio27";
+ function = "cam_mclk1";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ camera_rear_default: camera-rear-default-state {
+ pwdn-pins {
+ pins = "gpio34";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ rst-pins {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ mclk0-pins {
+ pins = "gpio26";
+ function = "cam_mclk0";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ cci0_default: cci0-default-state {
+ pins = "gpio29", "gpio30";
+ function = "cci_i2c";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cdc_dmic_default: cdc-dmic-default-state {
+ clk-pins {
+ pins = "gpio0";
+ function = "dmic0_clk";
+ drive-strength = <8>;
+ };
+ data-pins {
+ pins = "gpio1";
+ function = "dmic0_data";
+ drive-strength = <8>;
+ };
+ };
+
+ cdc_dmic_sleep: cdc-dmic-sleep-state {
+ clk-pins {
+ pins = "gpio0";
+ function = "dmic0_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ data-pins {
+ pins = "gpio1";
+ function = "dmic0_data";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ cdc_pdm_default: cdc-pdm-default-state {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68";
+ function = "cdc_pdm0";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cdc_pdm_sleep: cdc-pdm-sleep-state {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68";
+ function = "cdc_pdm0";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ pri_mi2s_default: mi2s-pri-default-state {
+ pins = "gpio113", "gpio114", "gpio115",
"gpio116";
+ function = "pri_mi2s";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ pri_mi2s_sleep: mi2s-pri-sleep-state {
+ pins = "gpio113", "gpio114", "gpio115",
"gpio116";
+ function = "pri_mi2s";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
+ pins = "gpio116";
+ function = "pri_mi2s";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
+ pins = "gpio116";
+ function = "pri_mi2s";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pri_mi2s_ws_default: mi2s-pri-ws-default-state {
+ pins = "gpio110";
+ function = "pri_mi2s_ws";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
+ pins = "gpio110";
+ function = "pri_mi2s_ws";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sec_mi2s_default: mi2s-sec-default-state {
+ pins = "gpio112", "gpio117", "gpio118",
"gpio119";
+ function = "sec_mi2s";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sec_mi2s_sleep: mi2s-sec-sleep-state {
+ pins = "gpio112", "gpio117", "gpio118",
"gpio119";
+ function = "sec_mi2s";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc1_default: sdc1-default-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ cmd-pins {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ data-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc1_sleep: sdc1-sleep-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ cmd-pins {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ data-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_default: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ wcss_wlan_default: wcss-wlan-default-state {
+ pins = "gpio40", "gpio41", "gpio42", "gpio43",
"gpio44";
+ function = "wcss_wlan";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-msm8916";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x01800000 0x80000>;
+ clocks = <&xo_board>,
+ <&sleep_clk>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <0>,
+ <0>,
+ <0>;
+ clock-names = "xo",
+ "sleep_clk",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "ext_mclk",
+ "ext_pri_i2s",
+ "ext_sec_i2s";
+ };
+
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-msm8916", "syscon";
+ reg = <0x01937000 0x30000>;
+ };
+
+ mdss: display-subsystem@1a00000 {
+ status = "disabled";
+ compatible = "qcom,mdss";
+ reg = <0x01a00000 0x1000>,
+ <0x01ac8000 0x3000>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdss_mdp: display-controller@1a01000 {
+ compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+ reg = <0x01a01000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ iommus = <&apps_iommu 4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_mdp_intf1_out: endpoint {
+ remote-endpoint =
<&mdss_dsi0_in>;
+ };
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@1a98000 {
+ compatible = "qcom,msm8916-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
+ reg = <0x01a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+ <&gcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ clocks = <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core";
+ phys = <&mdss_dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint =
<&mdss_mdp_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@1a98300 {
+ compatible = "qcom,dsi-phy-28nm-lp";
+ reg = <0x01a98300 0xd4>,
+ <0x01a98500 0x280>,
+ <0x01a98780 0x30>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "ref";
+ };
+ };
+
+ camss: camss@1b0ac00 {
+ compatible = "qcom,msm8916-camss";
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+ power-domains = <&gcc VFE_GDSC>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&apps_iommu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ cci: cci@1b0c000 {
+ compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x01b0c000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb", "cci_ahb",
+ "cci", "camss_ahb";
+ assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+ <&gcc GCC_CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <19200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpu: gpu@1c00000 {
+ compatible = "qcom,adreno-306.0", "qcom,adreno";
+ reg = <0x01c00000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core",
+ "iface",
+ "mem",
+ "mem_iface",
+ "alt_mem_iface",
+ "gfx3d";
+ clocks =
+ <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_OXILI_GMEM_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GFX3D_CLK_SRC>;
+ power-domains = <&gcc OXILI_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+ status = "disabled";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ };
+ };
+ };
+
+ venus: video-codec@1d00000 {
+ compatible = "qcom,msm8916-venus";
+ reg = <0x01d00000 0xff000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&gcc VENUS_GDSC>;
+ clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+ <&gcc GCC_VENUS0_AHB_CLK>,
+ <&gcc GCC_VENUS0_AXI_CLK>;
+ clock-names = "core", "iface", "bus";
+ iommus = <&apps_iommu 5>;
+ memory-region = <&venus_mem>;
+ status = "disabled";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
+ apps_iommu: iommu@1ef0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01e20000 0x20000>;
+ reg = <0x01ef0000 0x3000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <17>;
+
+ /* VFE */
+ iommu-ctx@3000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* MDP_0 */
+ iommu-ctx@4000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x4000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* VENUS_NS */
+ iommu-ctx@5000 {
+ compatible = "qcom,msm-iommu-v1-sec";
+ reg = <0x5000 0x1000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpu_iommu: iommu@1f08000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #iommu-cells = <1>;
+ compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x01f08000 0x10000>;
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_GFX_TCU_CLK>;
+ clock-names = "iface", "bus";
+ qcom,iommu-secure-id = <18>;
+
+ /* GFX3D_USER */
+ iommu-ctx@1000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* GFX3D_PRIV */
+ iommu-ctx@2000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0200f000 0x001000>,
+ <0x02400000 0x400000>,
+ <0x02c00000 0x400000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ bam_dmux_dma: dma-controller@4044000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x04044000 0x19000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+
+ num-channels = <6>;
+ qcom,num-ees = <1>;
+ qcom,powered-remotely;
+
+ status = "disabled";
+ };
+
+ mpss: remoteproc@4080000 {
+ compatible = "qcom,msm8916-mss-pil";
+ reg = <0x04080000 0x100>,
+ <0x04020000 0x040>;
+
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24
IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 0
IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 1
IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 2
IRQ_TYPE_EDGE_RISING>,
+ <&hexagon_smp2p_in 3
IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8916_VDDCX>,
+ <&rpmpd MSM8916_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ qcom,smem-states = <&hexagon_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&scm 0>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ bam_dmux: bam-dmux {
+ compatible = "qcom,bam-dmux";
+
+ interrupt-parent = <&hexagon_smsm>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11
IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pc", "pc-ack";
+
+ qcom,smem-states = <&apps_smsm 1>, <&apps_smsm
11>;
+ qcom,smem-state-names = "pc", "pc-ack";
+
+ dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+ dma-names = "tx", "rx";
+
+ status = "disabled";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,smd-edge = <0>;
+ qcom,ipc = <&apcs 8 12>;
+ qcom,remote-pid = <1>;
+
+ label = "hexagon";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,smd-channels =
"fastrpcsmd-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cb@1 {
+ compatible =
"qcom,fastrpc-compute-cb";
+ reg = <1>;
+ };
+ };
+ };
+ };
+
+ sound: sound@7702000 {
+ status = "disabled";
+ compatible = "qcom,apq8016-sbc-sndcard";
+ reg = <0x07702000 0x4>, <0x07702004 0x4>;
+ reg-names = "mic-iomux", "spkr-iomux";
+ };
+
+ lpass: audio-controller@7708000 {
+ status = "disabled";
+ compatible = "qcom,apq8016-lpass-cpu";
+
+ /*
+ * Note: Unlike the name would suggest, the SEC_I2S_CLK
+ * is actually only used by Tertiary MI2S while
+ * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+ */
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+ <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
+
+ clock-names = "ahbix-clk",
+ "mi2s-bit-clk0",
+ "mi2s-bit-clk1",
+ "mi2s-bit-clk2",
+ "mi2s-bit-clk3",
+ "pcnoc-mport-clk",
+ "pcnoc-sway-clk";
+ #sound-dai-cells = <1>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x07708000 0x10000>;
+ reg-names = "lpass-lpaif";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ lpass_codec: audio-codec@771c000 {
+ compatible = "qcom,msm8916-wcd-digital-codec";
+ reg = <0x0771c000 0x400>;
+ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+ <&gcc GCC_CODEC_DIGCODEC_CLK>;
+ clock-names = "ahbix-clk", "mclk";
+ #sound-dai-cells = <1>;
+ status = "disabled";
+ };
+
+ sdhc_1: mmc@7824900 {
+ compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+ <&gcc GCC_SDCC1_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ pinctrl-0 = <&sdc1_default>;
+ pinctrl-1 = <&sdc1_sleep>;
+ pinctrl-names = "default", "sleep";
+ mmc-ddr-1_8v;
+ bus-width = <8>;
+ non-removable;
+ status = "disabled";
+ };
+
+ sdhc_2: mmc@7864900 {
+ compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+ reg-names = "hc", "core";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "core", "xo";
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ blsp_dma: dma-controller@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc
GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_uart1_default>;
+ pinctrl-1 = <&blsp_uart1_sleep>;
+ status = "disabled";
+ };
+
+ blsp_uart2: serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b0000 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc
GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_uart2_default>;
+ pinctrl-1 = <&blsp_uart2_sleep>;
+ status = "disabled";
+ };
+
+ blsp_i2c1: i2c@78b5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_i2c1_default>;
+ pinctrl-1 = <&blsp_i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b5000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_spi1_default>;
+ pinctrl-1 = <&blsp_spi1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_i2c2_default>;
+ pinctrl-1 = <&blsp_i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi2: spi@78b6000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b6000 0x500>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_spi2_default>;
+ pinctrl-1 = <&blsp_spi2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c3: i2c@78b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_i2c3_default>;
+ pinctrl-1 = <&blsp_i2c3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi3: spi@78b7000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b7000 0x500>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_spi3_default>;
+ pinctrl-1 = <&blsp_spi3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c4: i2c@78b8000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_i2c4_default>;
+ pinctrl-1 = <&blsp_i2c4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi4: spi@78b8000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b8000 0x500>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_spi4_default>;
+ pinctrl-1 = <&blsp_spi4_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c5: i2c@78b9000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_i2c5_default>;
+ pinctrl-1 = <&blsp_i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi5: spi@78b9000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078b9000 0x500>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_spi5_default>;
+ pinctrl-1 = <&blsp_spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_i2c6_default>;
+ pinctrl-1 = <&blsp_i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp_spi6: spi@78ba000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x078ba000 0x500>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp_spi6_default>;
+ pinctrl-1 = <&blsp_spi6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usb: usb@78d9000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x078d9000 0x200>,
+ <0x078d9200 0x200>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+ <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ clock-names = "iface", "core";
+ assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+ assigned-clock-rates = <80000000>;
+ resets = <&gcc GCC_USB_HS_BCR>;
+ reset-names = "core";
+ phy_type = "ulpi";
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ ahb-burst-config = <0>;
+ phy-names = "usb-phy";
+ phys = <&usb_hs_phy>;
+ status = "disabled";
+ #reset-cells = <1>;
+
+ ulpi {
+ usb_hs_phy: phy {
+ compatible = "qcom,usb-hs-phy-msm8916",
+ "qcom,usb-hs-phy";
+ #phy-cells = <0>;
+ clocks = <&xo_board>, <&gcc
GCC_USB2A_PHY_SLEEP_CLK>;
+ clock-names = "ref", "sleep";
+ resets = <&gcc GCC_USB2A_PHY_BCR>,
<&usb 0>;
+ reset-names = "phy", "por";
+ qcom,init-seq = /bits/ 8 <0x0 0x44>,
+ <0x1 0x6b>,
+ <0x2 0x24>,
+ <0x3 0x13>;
+ };
+ };
+ };
+
+ wcnss: remoteproc@a204000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>,
<0x0a21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_mem>;
+
+ interrupts-extended = <&intc GIC_SPI 149
IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0
IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1
IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2
IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3
IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack";
+
+ power-domains = <&rpmpd MSM8916_VDDCX>,
+ <&rpmpd MSM8916_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcss_wlan_default>;
+
+ status = "disabled";
+
+ wcnss_iris: iris {
+ /* Separate chip, compatible is board-specific
*/
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
+
+ label = "pronto";
+
+ wcnss_ctrl: wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&wcnss>;
+
+ wcnss_bt: bluetooth {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wcnss_wifi: wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145
IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146
IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm
10>, <&apps_smsm 9>;
+ qcom,smem-state-names =
"tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+ <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+ interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apcs: mailbox@b011000 {
+ compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+ reg = <0x0b011000 0x1000>;
+ #mbox-cells = <1>;
+ clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+ clock-names = "pll", "aux";
+ #clock-cells = <0>;
+ };
+
+ a53pll: clock@b016000 {
+ compatible = "qcom,msm8916-a53pll";
+ reg = <0x0b016000 0x40>;
+ #clock-cells = <0>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ timer@b020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b020000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@b021000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b021000 0x1000>,
+ <0x0b022000 0x1000>;
+ };
+
+ frame@b023000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b024000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b025000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b026000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b027000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@b028000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ cpu0_acc: power-manager@b088000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b088000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu0_saw: power-manager@b089000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b089000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu1_acc: power-manager@b098000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b098000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu1_saw: power-manager@b099000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b099000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu2_acc: power-manager@b0a8000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b0a8000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu2_saw: power-manager@b0a9000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b0a9000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu3_acc: power-manager@b0b8000 {
+ compatible = "qcom,msm8916-acc";
+ reg = <0x0b0b8000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+
+ cpu3_saw: power-manager@b0b9000 {
+ compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+ reg = <0x0b0b9000 0x1000>;
+ status = "reserved"; /* Controlled by PSCI firmware */
+ };
+ };
+
+ thermal-zones {
+ cpu0-1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu0_1_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_1_alert0>;
+ cooling-device = <&CPU0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu2_3_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_3_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_3_alert0>;
+ cooling-device = <&CPU0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ gpu_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ gpu_crit: gpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cam_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ modem_alert0: trip-point0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/configs/dragonboard410c_defconfig
b/configs/dragonboard410c_defconfig
index efdee8a40fa3..0481ceeb6c65 100644
--- a/configs/dragonboard410c_defconfig
+++ b/configs/dragonboard410c_defconfig
@@ -9,7 +9,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x0
-CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c"
+CONFIG_DEFAULT_DEVICE_TREE="apq8016-sbc"
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
CONFIG_SYS_LOAD_ADDR=0x80080000
--
2.43.0
