Hi Andrew, On Fri, Feb 2, 2024 at 1:25 AM Andrew Davis <a...@ti.com> wrote: > > Loading ATF is only supported from the R5, move the Kconfig symbol > definition to match. > > Signed-off-by: Andrew Davis <a...@ti.com> > --- > arch/arm/mach-k3/Kconfig | 7 ------- > arch/arm/mach-k3/r5/Kconfig | 6 ++++++ > 2 files changed, 6 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig > index 03898424c95..45cf740bb1f 100644 > --- a/arch/arm/mach-k3/Kconfig > +++ b/arch/arm/mach-k3/Kconfig > @@ -114,13 +114,6 @@ config K3_EARLY_CONS_IDX > Use this option to set the index of the serial device to be used > for the early console during SPL execution. > > -config SYS_K3_SPL_ATF > - bool "Start Cortex-A from SPL" > - depends on CPU_V7R > - help > - Enabling this will try to start Cortex-A (typically with ATF) > - after SPL from R5. > - > config K3_ATF_LOAD_ADDR > hex "Load address of ATF image" > default 0x70000000 > diff --git a/arch/arm/mach-k3/r5/Kconfig b/arch/arm/mach-k3/r5/Kconfig > index ae79f8ff6cd..317a6c4b67e 100644 > --- a/arch/arm/mach-k3/r5/Kconfig > +++ b/arch/arm/mach-k3/r5/Kconfig > @@ -43,3 +43,9 @@ config K3_SYSFW_IMAGE_SPI_OFFS > help > Offset of the combined System Firmware and configuration image tree > blob to be loaded when booting from a SPI flash memory. > + > +config SYS_K3_SPL_ATF > + bool "Start Cortex-A from SPL" > + help > + Enabling this will try to start Cortex-A (typically with ATF) > + after SPL from R5. > -- > 2.39.2 >
Reviewed-by: Igor Opaniuk <igor.opan...@foundries.io> -- Best regards - Freundliche Grüsse - Meilleures salutations Igor Opaniuk Senior Software Engineer, Embedded & Security E: igor.opan...@foundries.io W: www.foundries.io