On 15.02.24 2:35 PM, Frieder Schrempf wrote:
From: Frieder Schrempf <[email protected]>
Describe how to build and boot for the Sielaff i.MX6 Solo board.
Signed-off-by: Frieder Schrempf <[email protected]>
---
Changes in v3:
* include docs in upper-level index
Changes in v2:
* none
---
doc/board/index.rst | 1 +
doc/board/sielaff/imx6dl-sielaff.rst | 32 ++++++++++++++++++++++++++++
doc/board/sielaff/index.rst | 9 ++++++++
3 files changed, 42 insertions(+)
create mode 100644 doc/board/sielaff/imx6dl-sielaff.rst
create mode 100644 doc/board/sielaff/index.rst
diff --git a/doc/board/index.rst b/doc/board/index.rst
index d0f9f355d2e..62357c99388 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -42,6 +42,7 @@ Board-specific doc
renesas/index
rockchip/index
samsung/index
+ sielaff/index
siemens/index
sifive/index
sipeed/index
diff --git a/doc/board/sielaff/imx6dl-sielaff.rst
b/doc/board/sielaff/imx6dl-sielaff.rst
new file mode 100644
index 00000000000..24dd67ccaef
--- /dev/null
+++ b/doc/board/sielaff/imx6dl-sielaff.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Sielaff i.MX6 Solo Board
+========================
+
+The Sielaff i.MX6 Solo board is a control and HMI board for vending
+machines.
Thank you for providing the build instruction.
I had to look up the abbreviation:
%s/HMI/Human Machine Interface (HMI)/
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Boot
These lines are not needed. We have a navigation tree on the left side
of the generated HTML page.
+
+Build U-Boot
+^^^^^^^^^^^^
+
+.. code-block:: bash
+
+ $ make imx6dl_sielaff_defconfig
+ $ make CROSS_COMPILE=arm-none-linux-gnueabihf-
U-Boot does not use floats.
make CROSS_COMPILE=arm-linux-gnueabi-
+
+Burn the flash.bin to SD card at an offset of 1 KiB:
Copy the flash.bin file to an SD card at an offset of 1 KiB:
+
+.. code-block:: bash
+
+ $ dd if=flash.bin of=/dev/sd[x] bs=1K seek=1 conv=notrunc
Please, remove '$ '. It makes copy and paste more difficult.
Anyway $ is the wrong prompt. Only root can use dd.
If you really want a prompt, use:
.. prompt:: bash #
conv=notrunc has no effect on SD-cards but is needed when copying to an
image file.
Best regards
Heinrich
+
+Boot
+^^^^
+
+Put the SD card in the slot on the board and apply power.
diff --git a/doc/board/sielaff/index.rst b/doc/board/sielaff/index.rst
new file mode 100644
index 00000000000..a8376484d88
--- /dev/null
+++ b/doc/board/sielaff/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Sielaff
+=======
+
+.. toctree::
+ :maxdepth: 2
+
+ imx6dl-sielaff
