Hi Tom,
On 2/29/2024 23:08, Tom Rini wrote:
On Thu, Feb 29, 2024 at 08:04:16PM +0800, Elon Zhang wrote:
TB-RK3588X board is a Rockchip Toybrick RK3588 based development board.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB Memory LPDDR4x
Mali G610MC4 GPU
2× MIPI-CSI0 Connector
1x 2Lanes PCIe3.0 Connector
1x SATA3.0 Connector
32GB eMMC Module
2x USB 2.0, 2x USB 3.0
1x HDMI Output, 1x HDMI Input
2x Ethernet Port
Functions work normally:
[1] USB2.0 Host
[2] Ethernet0 with PHY RTL8211F
More information can be obtained from the following websites:
[1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html
[2] http://t.rock-chips.com/
Kernel commits:
8ffe365f8dc7 ("arm64: dts: rockchip: Add devicetree support for TB-RK3588X
board")
7140387ff49d ("dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X")
Signed-off-by: Elon Zhang <zhan...@rock-chips.com>
[snip]
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
Is this just a copy/paste thing that keeps getting re-used? Ideally,
BOARD_SPECIFIC_OPTIONS shouldn't exist and it's either a select/imply at
the TARGET_... level or something in the defconfig. But having an empty
one is very confusing.
Yes... It will be removed later. Thanks for review!
Best regards,
Elon
