USB4 has been added to the boot targets and
also add support to enable JTAG.
Signed-off-by: Shubhangi Shrikrushna Mahalle
<shubhangi.shrikrushna-maha...@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbar...@amd.com>
---
board/xilinx/zynqmp/zynqmp_kria.env | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/xilinx/zynqmp/zynqmp_kria.env
b/board/xilinx/zynqmp/zynqmp_kria.env
index 0f940bd68f..7d3ad31226 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -44,7 +44,8 @@ usb_boot=usb start; if usb dev ${devnum}; then devtype=usb;
run scan_dev_for_boo
preboot=setenv boot_targets; setenv modeboot; run board_setup
# SOM specific boot methods
-som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1
usb0 usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; elif test ${card1_name} =
SCK-KR-G; then setenv boot_targets usb0 usb1 usb2 usb3 pxe dhcp && run
distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv boot_targets usb0
usb1 usb2 usb3 pxe dhcp && run distro_bootcmd; fi;"
+usb_boot_devices='usb0 usb1 usb2 usb3 usb4'
+som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1
${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; elif test
${card1_name} = SCK-KR-G; then setenv boot_targets ${usb_boot_devices} pxe dhcp
jtag && run distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv
boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; fi;"
som_mmc_boot=setenv boot_targets mmc0 && run distro_bootcmd
k26_starter=SMK-K26-XCL2G
--
2.25.1
