Hi Kever, On 2024-03-14 07:58, Kever Yang wrote: > > On 2024/2/1 06:08, Jonas Karlman wrote: >> Add a minimal generic RK3588S/RK3588 board that only have eMMC and SDMMC >> enabled. This defconfig can be used to boot from eMMC or SD-card on most >> RK3588S/RK3588 boards that follow reference board design. >> >> Also fix the alphabetical order of RK3588 boards listed in Makefile and >> documentation. >> >> Signed-off-by: Jonas Karlman <[email protected]> > > Since rk356x already have a generic board, rk3588 can also have one. > > Reviewed-by: Kever Yang <[email protected]>
Thanks, I will send a v2 with an updated defconfig to take advantage of the new ROCKCHIP_COMMON_STACK_ADDR bss and stack addresses. Regards, Jonas > > Thanks, > - Kever > >> --- >> This patch depend on the series "rockchip: rk35xx: Sync device tree >> with linux v6.8-rc1" [1]. >> >> [1] https://patchwork.ozlabs.org/cover/1891669/ >> --- >> arch/arm/dts/Makefile | 5 +- >> arch/arm/dts/rk3588-generic-u-boot.dtsi | 3 ++ >> arch/arm/dts/rk3588-generic.dts | 44 ++++++++++++++++ >> board/rockchip/evb_rk3588/MAINTAINERS | 7 +++ >> configs/generic-rk3588_defconfig | 68 +++++++++++++++++++++++++ >> doc/board/rockchip/rockchip.rst | 3 +- >> 6 files changed, 127 insertions(+), 3 deletions(-) >> create mode 100644 arch/arm/dts/rk3588-generic-u-boot.dtsi >> create mode 100644 arch/arm/dts/rk3588-generic.dts >> create mode 100644 configs/generic-rk3588_defconfig >> [snip]
