On jeu., mars 21, 2024 at 20:38, Marek Vasut <marek.va...@mailbox.org> wrote:
> On 3/21/24 11:01 AM, Mattijs Korpershoek wrote: >> Hi Marek, >> >> Thank you for the patch. >> >> On dim., mars 17, 2024 at 05:42, Marek Vasut >> <marek.vasut+rene...@mailbox.org> wrote: >> >>> The dm_usb_gadget_handle_interrupts() has no place in board code. Move >>> this into DWC3 driver. The OMAP implementation is special, add new weak >>> dwc3_uboot_interrupt_status() function to decide whether DWC3 interrupt >>> handling should be called, and override it in OMAP DWC3 code, to repair >>> the special OMAP interrupt handling code until OMAP gets switched over >>> to DM UDC proper. >>> >>> Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org> >> >> Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> >> >> Tested that I could scan for usb mass storage and that I can use >> fastboot: >> >> => fastboot usb 0 >> crq->brequest:0x0 >> => usb start >> starting USB... >> Bus usb@ff500000: Register 3000140 NbrPorts 3 >> Starting the controller >> USB XHCI 1.10 >> scanning bus usb@ff500000 for devices... 3 USB Device(s) found >> scanning usb for storage devices... 1 Storage Device(s) found >> >> => usb storage >> Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra >> Type: Removable Hard Disk >> Capacity: 29328.0 MB = 28.6 GB (60063744 x 512) >> >> Tested-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> # vim3 > > Thank you! > > Please feel free to pick this via DFU tree in a week or two, so others > can comment on this and test this too. Will do!