The mx6cuboxi_defconfig target supports several board variants. All of these variants use the hummingboard devicetree in U-Boot.
Currently, the devicetree model as well as the board variant name are shown: U-Boot 2024.04-rc5-00003-g774ec4fda8 (Mar 27 2024 - 16:48:35 +0100) ... Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) Board: MX6 Cubox-i ... Printing the devicetree model that is used internally by U-Boot may confuse users. Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the board name is printed instead. Signed-off-by: Fabio Estevam <feste...@gmail.com> --- configs/mx6cuboxi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 27ceb22599a6..e3aba715aa58 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -28,6 +28,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;" CONFIG_SYS_PBSIZE=532 +# CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y -- 2.34.1
