From: Peng Fan <peng....@nxp.com>
Convert to OF_UPSTREAM for i.MX8MP EVK
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/imx8mp-evk.dts | 684 ----------------------------------------
arch/arm/mach-imx/imx8m/Kconfig | 1 +
configs/imx8mp_evk_defconfig | 2 +-
4 files changed, 2 insertions(+), 686 deletions(-)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d85a33055c9..55e9ab0725e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1105,7 +1105,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mp-dhcom-pdk2.dtb \
imx8mp-dhcom-pdk3.dtb \
imx8mp-dhcom-pdk3-overlay-rev100.dtbo \
- imx8mp-evk.dtb \
imx8mp-icore-mx8mp-edimm2.2.dtb \
imx8mp-msc-sm2s.dtb \
imx8mp-phyboard-pollux-rdk.dtb \
diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
deleted file mode 100644
index 9f1469db554..00000000000
--- a/arch/arm/dts/imx8mp-evk.dts
+++ /dev/null
@@ -1,684 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 NXP
- */
-
-/dts-v1/;
-
-#include <dt-bindings/phy/phy-imx8-pcie.h>
-#include "imx8mp.dtsi"
-
-/ {
- model = "NXP i.MX8MPlus EVK board";
- compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
-
- chosen {
- stdout-path = &uart2;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_led>;
-
- status {
- label = "yellow:status";
- gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0xc0000000>,
- <0x1 0x00000000 0 0xc0000000>;
- };
-
- pcie0_refclk: pcie0-refclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <100000000>;
- };
-
- reg_can1_stby: regulator-can1-stby {
- compatible = "regulator-fixed";
- regulator-name = "can1-stby";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1_reg>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_can2_stby: regulator-can2-stby {
- compatible = "regulator-fixed";
- regulator-name = "can2-stby";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2_reg>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_pcie0: regulator-pcie {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie0_reg>;
- regulator-name = "MPCIE_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&A53_0 {
- cpu-supply = <®_arm>;
-};
-
-&A53_1 {
- cpu-supply = <®_arm>;
-};
-
-&A53_2 {
- cpu-supply = <®_arm>;
-};
-
-&A53_3 {
- cpu-supply = <®_arm>;
-};
-
-&eqos {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_eqos>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy0>;
- snps,force_thresh_dma_mode;
- snps,mtl-tx-config = <&mtl_tx_setup>;
- snps,mtl-rx-config = <&mtl_rx_setup>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- eee-broken-1000t;
- reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- realtek,clkout-disable;
- };
- };
-
- mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <5>;
- snps,tx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- snps,priority = <0x1>;
- };
-
- queue1 {
- snps,dcb-algorithm;
- snps,priority = <0x2>;
- };
-
- queue2 {
- snps,dcb-algorithm;
- snps,priority = <0x4>;
- };
-
- queue3 {
- snps,dcb-algorithm;
- snps,priority = <0x8>;
- };
-
- queue4 {
- snps,dcb-algorithm;
- snps,priority = <0xf0>;
- };
- };
-
- mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <5>;
- snps,rx-sched-sp;
-
- queue0 {
- snps,dcb-algorithm;
- snps,priority = <0x1>;
- snps,map-to-dma-channel = <0>;
- };
-
- queue1 {
- snps,dcb-algorithm;
- snps,priority = <0x2>;
- snps,map-to-dma-channel = <1>;
- };
-
- queue2 {
- snps,dcb-algorithm;
- snps,priority = <0x4>;
- snps,map-to-dma-channel = <2>;
- };
-
- queue3 {
- snps,dcb-algorithm;
- snps,priority = <0x8>;
- snps,map-to-dma-channel = <3>;
- };
-
- queue4 {
- snps,dcb-algorithm;
- snps,priority = <0xf0>;
- snps,map-to-dma-channel = <4>;
- };
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
- phy-mode = "rgmii-id";
- phy-handle = <ðphy1>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- eee-broken-1000t;
- reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <80000>;
- realtek,clkout-disable;
- };
- };
-};
-
-&flexcan1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <®_can1_stby>;
- status = "okay";
-};
-
-&flexcan2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <®_can2_stby>;
- status = "disabled";/* can2 pin conflict with pdm */
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- pmic@25 {
- compatible = "nxp,pca9450c";
- reg = <0x25>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
- regulators {
- BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- reg_arm: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1025000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- nxp,dvs-run-voltage = <950000>;
- nxp,dvs-standby-voltage = <850000>;
- };
-
- BUCK4 {
- regulator-name = "BUCK4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- BUCK5 {
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <1045000>;
- regulator-max-microvolt = <1155000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <1710000>;
- regulator-max-microvolt = <1890000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO5 {
- regulator-name = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c3 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- pca6416: gpio@20 {
- compatible = "ti,tca6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pca6416_int>;
- interrupt-parent = <&gpio1>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
- gpio-line-names = "EXT_PWREN1",
- "EXT_PWREN2",
- "CAN1/I2C5_SEL",
- "PDM/CAN2_SEL",
- "FAN_EN",
- "PWR_MEAS_IO1",
- "PWR_MEAS_IO2",
- "EXP_P0_7",
- "EXP_P1_0",
- "EXP_P1_1",
- "EXP_P1_2",
- "EXP_P1_3",
- "EXP_P1_4",
- "EXP_P1_5",
- "EXP_P1_6",
- "EXP_P1_7";
- };
-};
-
-/* I2C on expansion connector J22. */
-&i2c5 {
- clock-frequency = <100000>; /* Lower clock speed for external bus. */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c5>;
- status = "disabled"; /* can1 pins conflict with i2c5 */
-
- /* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions:
- * LOW: CAN1 (default, pull-down)
- * HIGH: I2C5
- * You need to set it to high to enable I2C5 (for example, add gpio-hog
- * in pca6416 node).
- */
-};
-
-&pcie_phy {
- fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
- clocks = <&pcie0_refclk>;
- clock-names = "ref";
- status = "okay";
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie0>;
- reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
- clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
- <&clk IMX8MP_CLK_PCIE_ROOT>,
- <&clk IMX8MP_CLK_HSIO_AXI>;
- clock-names = "pcie", "pcie_aux", "pcie_bus";
- assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
- assigned-clock-rates = <10000000>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
- vpcie-supply = <®_pcie0>;
- status = "okay";
-};
-
-&snvs_pwrkey {
- status = "okay";
-};
-
-&uart2 {
- /* console */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usb3_phy1 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&usb_dwc3_1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usdhc2 {
- assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
- assigned-clock-rates = <400000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_usdhc2_vmmc>;
- bus-width = <4>;
- status = "okay";
-};
-
-&usdhc3 {
- assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
- assigned-clock-rates = <400000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_eqos: eqosgrp {
- fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC
0x2
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO
0x2
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0
0x90
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1
0x90
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2
0x90
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3
0x90
-
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL
0x90
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0
0x16
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1
0x16
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2
0x16
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3
0x16
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL
0x16
-
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
- MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22
0x10
- >;
- };
-
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2
- MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2
- MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
- MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
- MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
- MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
- MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
- MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
- MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
- MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
- MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
- MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
- MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
- MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
- MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
- MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
- MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
- >;
- };
-
- pinctrl_flexcan1_reg: flexcan1reggrp {
- fsl,pins = <
- MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /*
CAN1_STBY */
- >;
- };
-
- pinctrl_flexcan2_reg: flexcan2reggrp {
- fsl,pins = <
- MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /*
CAN2_STBY */
- >;
- };
-
- pinctrl_gpio_led: gpioledgrp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
- MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
- MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
- >;
- };
-
- pinctrl_i2c5: i2c5grp {
- fsl,pins = <
- MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2
- MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2
- >;
- };
-
- pinctrl_pcie0: pcie0grp {
- fsl,pins = <
- MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open
drain, pull up */
- MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41
- >;
- };
-
- pinctrl_pcie0_reg: pcie0reggrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41
- >;
- };
-
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
- >;
- };
-
- pinctrl_pca6416_int: pca6416_int_grp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input
pull-up. */
- >;
- };
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
- MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
- >;
- };
-
- pinctrl_usb1_vbus: usb1grp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
- MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
- MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
- MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
- MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
- MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
- MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
- MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
- MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
- MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
- MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
- MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
- MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
- MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
- MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
- MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2gpiogrp {
- fsl,pins = <
- MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
- MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
- MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
- MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
- MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
- MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
- MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
- MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
- MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
- MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
- MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
- MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
- MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
- MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
- MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
- MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
- MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
- MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
- MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
- MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
- MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
- fsl,pins = <
- MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
- MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
- MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
- MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
- MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
- MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
- MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
- MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
- MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
- MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
- MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166
- >;
- };
-};
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index cb8afce241d..fbde476a7f1 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -222,6 +222,7 @@ config TARGET_IMX8MP_EVK
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
+ imply OF_UPSTREAM
config TARGET_IMX8MP_VENICE
bool "Support Gateworks Venice iMX8M Plus module"
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 2846faa8352..7e5dfce2ab6 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x400000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mp-evk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-evk"
CONFIG_SPL_TEXT_BASE=0x920000
CONFIG_TARGET_IMX8MP_EVK=y
CONFIG_SYS_MONITOR_LEN=524288
--
2.35.3
