On 3/27/24 17:23, Marek Behún wrote:
Commit 35e29e89a386 ("arm: mvebu: Implement simple mvebu-reset driver
for enabling/disabling PCIe ports") made it so that the mvebu reset
driver for enabling/disabling PCIe ports is build if CONFIG_DM_RESET is
enabled. This is because PCI_MVEBU depends on DM_RESET.
But the driver should not be built for SPL. Indeed the PCI_MVEBU driver
is not supported in SPL now, and so the mvebu-reset driver is not needed.
Signed-off-by: Marek Behún <ka...@kernel.org>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
arch/arm/mach-mvebu/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 0584ed2be5..ef790d97fe 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -22,13 +22,14 @@ else # CONFIG_ARCH_KIRKWOOD
obj-y = cpu.o
obj-y += dram.o
obj-y += lowlevel.o
-obj-$(CONFIG_DM_RESET) += system-controller.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
+obj-$(CONFIG_DM_RESET) += system-controller.o
+
ifdef CONFIG_ARMADA_38X
obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
endif
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
