Hi Josua, On Thu, Mar 28, 2024 at 10:03 AM Josua Mayer <jo...@solid-run.com> wrote:
> I suggest changing their status to disabled, and keeping the nodes. > >> + > >> + phy: ethernet-phy@0 { > > This node name is shared with upstream imx6qdl-sr-som.dtsi > Give this one a u-boot-only internal name, maybe ethernet-phy@ff ... > Just disable the u-boot-internal phy node unconditionally, or delete it. > Because u-boot DTB is synced with upstream, the code below will update status > properties > for the standard etherent-phy@[0,1,4] nodes used by Linux. Thanks for the suggestions. My imx6-cuboxi board does not turn on anymore, unfortunately. As I cannot test it, I am not comfortable doing the changes. I hope you or Christian can submit a proper fix.