The mx6cuboxi_defconfig target supports several board variants. All of these variants use the hummingboard devicetree in U-Boot.
Currently, the devicetree model as well as the board variant name are shown: ... Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) Board: MX6 Cubox-i ... Printing the devicetree model that is used internally by U-Boot may confuse users. Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the board name is printed in board_late_init() instead. Signed-off-by: Fabio Estevam <[email protected]> --- Changes since v1: - Remove checkboard and print the board name in board_late_init(). board/solidrun/mx6cuboxi/mx6cuboxi.c | 40 ++++++---------------------- configs/mx6cuboxi_defconfig | 1 + 2 files changed, 9 insertions(+), 32 deletions(-) diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index 8edabf4404c2..31d30cfbbd7b 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -381,37 +381,6 @@ static bool has_emmc(void) return (mmc_get_op_cond(mmc, true) < 0) ? 0 : 1; } -/* Override the default implementation, DT model is not accurate */ -int checkboard(void) -{ - request_detect_gpios(); - - switch (board_type()) { - case CUBOXI: - puts("Board: MX6 Cubox-i"); - break; - case HUMMINGBOARD: - puts("Board: MX6 HummingBoard"); - break; - case HUMMINGBOARD2: - puts("Board: MX6 HummingBoard2"); - break; - case UNKNOWN: - default: - puts("Board: Unknown\n"); - goto out; - } - - if (is_rev_15_som()) - puts(" (som rev 1.5)\n"); - else - puts("\n"); - - free_detect_gpios(); -out: - return 0; -} - static int find_ethernet_phy(void) { struct mii_dev *bus = NULL; @@ -505,12 +474,15 @@ int board_late_init(void) switch (board_type()) { case CUBOXI: env_set("board_name", "CUBOXI"); + puts("Board: MX6 Cubox-i"); break; case HUMMINGBOARD: env_set("board_name", "HUMMINGBOARD"); + puts("Board: MX6 HummingBoard"); break; case HUMMINGBOARD2: env_set("board_name", "HUMMINGBOARD2"); + puts("Board: MX6 HummingBoard2"); break; case UNKNOWN: default: @@ -522,8 +494,12 @@ int board_late_init(void) else env_set("board_rev", "MX6DL"); - if (is_rev_15_som()) + if (is_rev_15_som()) { env_set("som_rev", "V15"); + puts(" (som rev 1.5)\n"); + } else { + puts("\n"); + } if (has_emmc()) env_set("has_emmc", "yes"); diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index 27ceb22599a6..e3aba715aa58 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -28,6 +28,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;" CONFIG_SYS_PBSIZE=532 +# CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y -- 2.34.1
