On 3/27/24 10:58 AM, MD Danish Anwar wrote:
> Add icssg_config.h / .c and icssg_classifier.c files. These are firmware
> configuration and classification related files. Add MII helper APIs and
> MACROs. These APIs and MACROs will be later used by ICSSG Ethernet driver.
> Also introduce icssg_prueth.h which has definition of prueth related
> structures.
>
> Signed-off-by: MD Danish Anwar <danishan...@ti.com>
> ---
> drivers/net/ti/icss_mii_rt.h | 192 ++++++++++++++
> drivers/net/ti/icssg_classifier.c | 376 +++++++++++++++++++++++++++
> drivers/net/ti/icssg_config.c | 406 ++++++++++++++++++++++++++++++
> drivers/net/ti/icssg_config.h | 177 +++++++++++++
> drivers/net/ti/icssg_prueth.h | 83 ++++++
> 5 files changed, 1234 insertions(+)
> create mode 100644 drivers/net/ti/icss_mii_rt.h
> create mode 100644 drivers/net/ti/icssg_classifier.c
> create mode 100644 drivers/net/ti/icssg_config.c
> create mode 100644 drivers/net/ti/icssg_config.h
> create mode 100644 drivers/net/ti/icssg_prueth.h
>
> diff --git a/drivers/net/ti/icss_mii_rt.h b/drivers/net/ti/icss_mii_rt.h
> new file mode 100644
> index 0000000000..4a78394701
> --- /dev/null
> +++ b/drivers/net/ti/icss_mii_rt.h
> @@ -0,0 +1,192 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +/* PRU-ICSS MII_RT register definitions
> + *
> + * Copyright (C) 2015-2024 Texas Instruments Incorporated - http://www.ti.com
In this and other patches, please fix the URL
s/http/https
> + */
> +
> +#ifndef __NET_PRUSS_MII_RT_H__
> +#define __NET_PRUSS_MII_RT_H__
> +
> +#include <regmap.h>
> +
> +/* PRUSS_MII_RT Registers */
> +#define PRUSS_MII_RT_RXCFG0 0x0
> +#define PRUSS_MII_RT_RXCFG1 0x4
> +#define PRUSS_MII_RT_TXCFG0 0x10
> +#define PRUSS_MII_RT_TXCFG1 0x14
> +#define PRUSS_MII_RT_TX_CRC0 0x20
> +#define PRUSS_MII_RT_TX_CRC1 0x24
> +#define PRUSS_MII_RT_TX_IPG0 0x30
> +#define PRUSS_MII_RT_TX_IPG1 0x34
> +#define PRUSS_MII_RT_PRS0 0x38
> +#define PRUSS_MII_RT_PRS1 0x3c
> +#define PRUSS_MII_RT_RX_FRMS0 0x40
> +#define PRUSS_MII_RT_RX_FRMS1 0x44
> +#define PRUSS_MII_RT_RX_PCNT0 0x48
> +#define PRUSS_MII_RT_RX_PCNT1 0x4c
> +#define PRUSS_MII_RT_RX_ERR0 0x50
> +#define PRUSS_MII_RT_RX_ERR1 0x54
> +
> +/* PRUSS_MII_RT_RXCFG0/1 bits */
> +#define PRUSS_MII_RT_RXCFG_RX_ENABLE BIT(0)
> +#define PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS BIT(1)
> +#define PRUSS_MII_RT_RXCFG_RX_CUT_PREAMBLE BIT(2)
> +#define PRUSS_MII_RT_RXCFG_RX_MUX_SEL BIT(3)
> +#define PRUSS_MII_RT_RXCFG_RX_L2_EN BIT(4)
> +#define PRUSS_MII_RT_RXCFG_RX_BYTE_SWAP BIT(5)
> +#define PRUSS_MII_RT_RXCFG_RX_AUTO_FWD_PRE BIT(6)
> +#define PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS BIT(9)
> +
> +/* PRUSS_MII_RT_TXCFG0/1 bits */
> +#define PRUSS_MII_RT_TXCFG_TX_ENABLE BIT(0)
> +#define PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE BIT(1)
> +#define PRUSS_MII_RT_TXCFG_TX_EN_MODE BIT(2)
> +#define PRUSS_MII_RT_TXCFG_TX_BYTE_SWAP BIT(3)
> +#define PRUSS_MII_RT_TXCFG_TX_MUX_SEL BIT(8)
> +#define PRUSS_MII_RT_TXCFG_PRE_TX_AUTO_SEQUENCE BIT(9)
> +#define PRUSS_MII_RT_TXCFG_PRE_TX_AUTO_ESC_ERR BIT(10)
> +#define PRUSS_MII_RT_TXCFG_TX_32_MODE_EN BIT(11)
> +#define PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN BIT(12) /* SR2.0
> onwards */
> +
> +#define PRUSS_MII_RT_TXCFG_TX_START_DELAY_SHIFT 16
> +#define PRUSS_MII_RT_TXCFG_TX_START_DELAY_MASK GENMASK(25, 16)
> +
> +#define PRUSS_MII_RT_TXCFG_TX_CLK_DELAY_SHIFT 28
> +#define PRUSS_MII_RT_TXCFG_TX_CLK_DELAY_MASK GENMASK(30, 28)
> +
> +/* PRUSS_MII_RT_TX_IPG0/1 bits */
> +#define PRUSS_MII_RT_TX_IPG_IPG_SHIFT 0
> +#define PRUSS_MII_RT_TX_IPG_IPG_MASK GENMASK(9, 0)
> +
> +/* PRUSS_MII_RT_PRS0/1 bits */
> +#define PRUSS_MII_RT_PRS_COL BIT(0)
> +#define PRUSS_MII_RT_PRS_CRS BIT(1)
> +
> +/* PRUSS_MII_RT_RX_FRMS0/1 bits */
> +#define PRUSS_MII_RT_RX_FRMS_MIN_FRM_SHIFT 0
> +#define PRUSS_MII_RT_RX_FRMS_MIN_FRM_MASK GENMASK(15, 0)
> +
> +#define PRUSS_MII_RT_RX_FRMS_MAX_FRM_SHIFT 16
> +#define PRUSS_MII_RT_RX_FRMS_MAX_FRM_MASK GENMASK(31, 16)
> +
> +/* Min/Max in MII_RT_RX_FRMS */
> +/* For EMAC and Switch */
> +#define PRUSS_MII_RT_RX_FRMS_MAX (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
> +#define PRUSS_MII_RT_RX_FRMS_MIN_FRM (64)
> +
> +/* for HSR and PRP */
> +#define PRUSS_MII_RT_RX_FRMS_MAX_FRM_LRE (PRUSS_MII_RT_RX_FRMS_MAX + \
> + ICSS_LRE_TAG_RCT_SIZE)
> +/* PRUSS_MII_RT_RX_PCNT0/1 bits */
> +#define PRUSS_MII_RT_RX_PCNT_MIN_PCNT_SHIFT 0
> +#define PRUSS_MII_RT_RX_PCNT_MIN_PCNT_MASK GENMASK(3, 0)
> +
> +#define PRUSS_MII_RT_RX_PCNT_MAX_PCNT_SHIFT 4
> +#define PRUSS_MII_RT_RX_PCNT_MAX_PCNT_MASK GENMASK(7, 4)
> +
> +/* PRUSS_MII_RT_RX_ERR0/1 bits */
> +#define PRUSS_MII_RT_RX_ERR_MIN_PCNT_ERR BIT(0)
> +#define PRUSS_MII_RT_RX_ERR_MAX_PCNT_ERR BIT(1)
> +#define PRUSS_MII_RT_RX_ERR_MIN_FRM_ERR BIT(2)
> +#define PRUSS_MII_RT_RX_ERR_MAX_FRM_ERR BIT(3)
> +
> +#define ICSSG_CFG_OFFSET 0
> +#define RGMII_CFG_OFFSET 4
> +
> +/* Constant to choose between MII0 and MII1 */
> +#define ICSS_MII0 0
> +#define ICSS_MII1 1
> +
> +/* ICSSG_CFG Register bits */
> +#define ICSSG_CFG_SGMII_MODE BIT(16)
> +#define ICSSG_CFG_TX_PRU_EN BIT(11)
> +#define ICSSG_CFG_RX_SFD_TX_SOF_EN BIT(10)
> +#define ICSSG_CFG_RTU_PRU_PSI_SHARE_EN BIT(9)
> +#define ICSSG_CFG_IEP1_TX_EN BIT(8)
> +#define ICSSG_CFG_MII1_MODE GENMASK(6, 5)
> +#define ICSSG_CFG_MII1_MODE_SHIFT 5
> +#define ICSSG_CFG_MII0_MODE GENMASK(4, 3)
> +#define ICSSG_CFG_MII0_MODE_SHIFT 3
> +#define ICSSG_CFG_RX_L2_G_EN BIT(2)
> +#define ICSSG_CFG_TX_L2_EN BIT(1)
> +#define ICSSG_CFG_TX_L1_EN BIT(0)
> +
> +enum mii_mode { MII_MODE_MII = 0, MII_MODE_RGMII, MII_MODE_SGMII };
> +
> +/* RGMII CFG Register bits */
> +#define RGMII_CFG_INBAND_EN_MII0 BIT(16)
> +#define RGMII_CFG_GIG_EN_MII0 BIT(17)
> +#define RGMII_CFG_INBAND_EN_MII1 BIT(20)
> +#define RGMII_CFG_GIG_EN_MII1 BIT(21)
> +#define RGMII_CFG_FULL_DUPLEX_MII0 BIT(18)
> +#define RGMII_CFG_FULL_DUPLEX_MII1 BIT(22)
> +#define RGMII_CFG_SPEED_MII0 GENMASK(2, 1)
> +#define RGMII_CFG_SPEED_MII1 GENMASK(6, 5)
> +#define RGMII_CFG_SPEED_MII0_SHIFT 1
> +#define RGMII_CFG_SPEED_MII1_SHIFT 5
> +#define RGMII_CFG_FULLDUPLEX_MII0 BIT(3)
> +#define RGMII_CFG_FULLDUPLEX_MII1 BIT(7)
> +#define RGMII_CFG_FULLDUPLEX_MII0_SHIFT 3
> +#define RGMII_CFG_FULLDUPLEX_MII1_SHIFT 7
> +#define RGMII_CFG_SPEED_10M 0
> +#define RGMII_CFG_SPEED_100M 1
> +#define RGMII_CFG_SPEED_1G 2
> +
> +static inline void icssg_mii_update_ipg(struct regmap *mii_rt, int mii, u32
> ipg)
> +{
> + u32 val;
> +
> + if (mii == ICSS_MII0) {
> + regmap_write(mii_rt, PRUSS_MII_RT_TX_IPG0, ipg);
> + } else {
> + /* Errata workaround: IEP1 is not read by h/w unless IEP0 is
> written */
> + regmap_read(mii_rt, PRUSS_MII_RT_TX_IPG0, &val);
> + regmap_write(mii_rt, PRUSS_MII_RT_TX_IPG1, ipg);
> + regmap_write(mii_rt, PRUSS_MII_RT_TX_IPG0, val);
> + }
> +}
> +
> +static inline void icssg_update_rgmii_cfg(struct regmap *miig_rt, int speed,
> + bool full_duplex, int slice, struct
> prueth_priv *priv)
> +{
> + u32 gig_en_mask, gig_val = 0, full_duplex_mask, full_duplex_val = 0;
> + u32 inband_en_mask, inband_val = 0;
> +
> + gig_en_mask = (slice == ICSS_MII0) ? RGMII_CFG_GIG_EN_MII0 :
> + RGMII_CFG_GIG_EN_MII1;
> + if (speed == SPEED_1000)
> + gig_val = gig_en_mask;
> + regmap_update_bits(miig_rt, RGMII_CFG_OFFSET, gig_en_mask, gig_val);
> +
> + inband_en_mask = (slice == ICSS_MII0) ? RGMII_CFG_INBAND_EN_MII0 :
> + RGMII_CFG_INBAND_EN_MII1;
> + if (speed == SPEED_10 && phy_interface_is_rgmii(priv->phydev))
> + inband_val = inband_en_mask;
> + regmap_update_bits(miig_rt, RGMII_CFG_OFFSET, inband_en_mask,
> inband_val);
> +
> + full_duplex_mask = (slice == ICSS_MII0) ? RGMII_CFG_FULL_DUPLEX_MII0 :
> + RGMII_CFG_FULL_DUPLEX_MII1;
> + if (full_duplex)
> + full_duplex_val = full_duplex_mask;
> + regmap_update_bits(miig_rt, RGMII_CFG_OFFSET, full_duplex_mask,
> + full_duplex_val);
> +}
> +
> +static inline void icssg_miig_set_interface_mode(struct regmap *miig_rt, int
> mii, int phy_if)
> +{
> + u32 val, mask, shift;
> +
> + mask = mii == ICSS_MII0 ? ICSSG_CFG_MII0_MODE : ICSSG_CFG_MII1_MODE;
> + shift = mii == ICSS_MII0 ? ICSSG_CFG_MII0_MODE_SHIFT :
> ICSSG_CFG_MII1_MODE_SHIFT;
> +
> + val = MII_MODE_RGMII;
> + if (phy_if == PHY_INTERFACE_MODE_MII)
> + val = MII_MODE_MII;
> +
> + val <<= shift;
> + regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, mask, val);
> + regmap_read(miig_rt, ICSSG_CFG_OFFSET, &val);
> +}
> +
> +#endif /* __NET_PRUSS_MII_RT_H__ */
> diff --git a/drivers/net/ti/icssg_classifier.c
> b/drivers/net/ti/icssg_classifier.c
> new file mode 100644
> index 0000000000..df7383f1fa
> --- /dev/null
> +++ b/drivers/net/ti/icssg_classifier.c
> @@ -0,0 +1,376 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Texas Instruments ICSSG Ethernet Driver
> + *
> + * Copyright (C) 2018-2024 Texas Instruments Incorporated -
> http://www.ti.com/
> + *
> + */
> +
> +#include <dm/ofnode.h>
> +#include <regmap.h>
> +
> +#define ICSSG_NUM_CLASSIFIERS 16
> +#define ICSSG_NUM_FT1_SLOTS 8
> +#define ICSSG_NUM_FT3_SLOTS 16
> +
> +#define ICSSG_NUM_CLASSIFIERS_IN_USE 1
> +
> +/* Filter 1 - FT1 */
> +#define FT1_NUM_SLOTS 8
> +#define FT1_SLOT_SIZE 0x10 /* bytes */
> +
> +/* offsets from FT1 slot base i.e. slot 1 start */
> +#define FT1_DA0 0x0
> +#define FT1_DA1 0x4
> +#define FT1_DA0_MASK 0x8
> +#define FT1_DA1_MASK 0xc
> +
> +#define FT1_N_REG(slize, n, reg) (offs[slice].ft1_slot_base +
> FT1_SLOT_SIZE * (n) + (reg))
> +
> +#define FT1_LEN_MASK GENMASK(19, 16)
> +#define FT1_LEN_SHIFT 16
> +#define FT1_LEN(len) (((len) << FT1_LEN_SHIFT) & FT1_LEN_MASK)
> +
> +#define FT1_START_MASK GENMASK(14, 0)
> +#define FT1_START(start) ((start) & FT1_START_MASK)
> +
> +#define FT1_MATCH_SLOT(n) (GENMASK(23, 16) & (BIT(n) << 16))
> +
> +enum ft1_cfg_type {
> + FT1_CFG_TYPE_DISABLED = 0,
> + FT1_CFG_TYPE_EQ,
> + FT1_CFG_TYPE_GT,
> + FT1_CFG_TYPE_LT,
> +};
> +
> +#define FT1_CFG_SHIFT(n) (2 * (n))
> +#define FT1_CFG_MASK(n) (0x3 << FT1_CFG_SHIFT((n)))
> +
> +/* Filter 3 - FT3 */
> +#define FT3_NUM_SLOTS 16
> +#define FT3_SLOT_SIZE 0x20 /* bytes */
> +
> +/* offsets from FT3 slot n's base */
> +#define FT3_START 0
> +#define FT3_START_AUTO 0x4
> +#define FT3_START_OFFSET 0x8
> +#define FT3_JUMP_OFFSET 0xc
> +#define FT3_LEN 0x10
> +#define FT3_CFG 0x14
> +#define FT3_T 0x18
> +#define FT3_T_MASK 0x1c
> +
> +#define FT3_N_REG(slize, n, reg) \
> + (offs[slice].ft3_slot_base + FT3_SLOT_SIZE * (n) + (reg))
> +
> +/* offsets from rx_class n's base */
> +#define RX_CLASS_AND_EN 0
> +#define RX_CLASS_OR_EN 0x4
> +
> +#define RX_CLASS_NUM_SLOTS 16
> +#define RX_CLASS_EN_SIZE 0x8 /* bytes */
> +
> +#define RX_CLASS_N_REG(slice, n, reg) \
> + (offs[slice].rx_class_base + RX_CLASS_EN_SIZE * (n) + (reg))
> +
> +/* RX Class Gates */
> +#define RX_CLASS_GATES_SIZE 0x4 /* bytes */
> +
> +#define RX_CLASS_GATES_N_REG(slice, n) \
> + (offs[slice].rx_class_gates_base + RX_CLASS_GATES_SIZE * (n))
> +
> +#define RX_CLASS_GATES_ALLOW_MASK BIT(6)
> +#define RX_CLASS_GATES_RAW_MASK BIT(5)
> +#define RX_CLASS_GATES_PHASE_MASK BIT(4)
> +
> +/* RX Class traffic data matching bits */
> +#define RX_CLASS_FT_UC BIT(31)
> +#define RX_CLASS_FT_MC BIT(30)
> +#define RX_CLASS_FT_BC BIT(29)
> +#define RX_CLASS_FT_FW BIT(28)
> +#define RX_CLASS_FT_RCV BIT(27)
> +#define RX_CLASS_FT_VLAN BIT(26)
> +#define RX_CLASS_FT_DA_P BIT(25)
> +#define RX_CLASS_FT_DA_I BIT(24)
> +#define RX_CLASS_FT_FT1_MATCH_MASK GENMASK(23, 16)
> +#define RX_CLASS_FT_FT1_MATCH_SHIFT 16
> +#define RX_CLASS_FT_FT3_MATCH_MASK GENMASK(15, 0)
> +#define RX_CLASS_FT_FT3_MATCH_SHIFT 0
> +
> +#define RX_CLASS_FT_FT1_MATCH(slot) \
> + ((BIT(slot) << RX_CLASS_FT_FT1_MATCH_SHIFT) & \
> + RX_CLASS_FT_FT1_MATCH_MASK)
> +
> +enum rx_class_sel_type {
> + RX_CLASS_SEL_TYPE_OR = 0,
> + RX_CLASS_SEL_TYPE_AND = 1,
> + RX_CLASS_SEL_TYPE_OR_AND_AND = 2,
> + RX_CLASS_SEL_TYPE_OR_OR_AND = 3,
> +};
> +
> +#define FT1_CFG_SHIFT(n) (2 * (n))
> +#define FT1_CFG_MASK(n) (0x3 << FT1_CFG_SHIFT((n)))
> +
> +#define RX_CLASS_SEL_SHIFT(n) (2 * (n))
> +#define RX_CLASS_SEL_MASK(n) (0x3 << RX_CLASS_SEL_SHIFT((n)))
> +
> +#define ICSSG_CFG_OFFSET 0
> +#define MAC_INTERFACE_0 0x18
> +#define MAC_INTERFACE_1 0x1c
> +
> +#define ICSSG_CFG_RX_L2_G_EN BIT(2)
> +
> +/* these are register offsets per PRU */
> +struct miig_rt_offsets {
> + u32 mac0;
> + u32 mac1;
> + u32 ft1_start_len;
> + u32 ft1_cfg;
> + u32 ft1_slot_base;
> + u32 ft3_slot_base;
> + u32 ft3_p_base;
> + u32 ft_rx_ptr;
> + u32 rx_class_base;
> + u32 rx_class_cfg1;
> + u32 rx_class_cfg2;
> + u32 rx_class_gates_base;
> + u32 rx_green;
> + u32 rx_rate_cfg_base;
> + u32 rx_rate_src_sel0;
> + u32 rx_rate_src_sel1;
> + u32 tx_rate_cfg_base;
> + u32 stat_base;
> + u32 tx_hsr_tag;
> + u32 tx_hsr_seq;
> + u32 tx_vlan_type;
> + u32 tx_vlan_ins;
> +};
> +
> +static struct miig_rt_offsets offs[] = {
> + /* PRU0 */
> + {
> + 0x8,
> + 0xc,
> + 0x80,
> + 0x84,
> + 0x88,
> + 0x108,
> + 0x308,
> + 0x408,
> + 0x40c,
> + 0x48c,
> + 0x490,
> + 0x494,
> + 0x4d4,
> + 0x4e4,
> + 0x504,
> + 0x508,
> + 0x50c,
> + 0x54c,
> + 0x63c,
> + 0x640,
> + 0x644,
> + 0x648,
> + },
> + /* PRU1 */
> + {
> + 0x10,
> + 0x14,
> + 0x64c,
> + 0x650,
> + 0x654,
> + 0x6d4,
> + 0x8d4,
> + 0x9d4,
> + 0x9d8,
> + 0xa58,
> + 0xa5c,
> + 0xa60,
> + 0xaa0,
> + 0xab0,
> + 0xad0,
> + 0xad4,
> + 0xad8,
> + 0xb18,
> + 0xc08,
> + 0xc0c,
> + 0xc10,
> + 0xc14,
> + },
> +};
> +
> +static inline u32 addr_to_da0(const u8 *addr)
> +{
> + return (u32)(addr[0] | addr[1] << 8 |
> + addr[2] << 16 | addr[3] << 24);
> +};
> +
> +static inline u32 addr_to_da1(const u8 *addr)
> +{
> + return (u32)(addr[4] | addr[5] << 8);
> +};
> +
> +static void rx_class_ft1_set_start_len(struct regmap *miig_rt, int slice,
> + u16 start, u8 len)
> +{
> + u32 offset, val;
> +
> + offset = offs[slice].ft1_start_len;
> + val = FT1_LEN(len) | FT1_START(start);
> + regmap_write(miig_rt, offset, val);
> +}
> +
> +static void rx_class_ft1_set_da(struct regmap *miig_rt, int slice,
> + int n, const u8 *addr)
> +{
> + u32 offset;
> +
> + offset = FT1_N_REG(slice, n, FT1_DA0);
> + regmap_write(miig_rt, offset, addr_to_da0(addr));
> + offset = FT1_N_REG(slice, n, FT1_DA1);
> + regmap_write(miig_rt, offset, addr_to_da1(addr));
> +}
> +
> +static void rx_class_ft1_set_da_mask(struct regmap *miig_rt, int slice,
> + int n, const u8 *addr)
> +{
> + u32 offset;
> +
> + offset = FT1_N_REG(slice, n, FT1_DA0_MASK);
> + regmap_write(miig_rt, offset, addr_to_da0(addr));
> + offset = FT1_N_REG(slice, n, FT1_DA1_MASK);
> + regmap_write(miig_rt, offset, addr_to_da1(addr));
> +}
> +
> +static void rx_class_ft1_cfg_set_type(struct regmap *miig_rt, int slice, int
> n,
> + enum ft1_cfg_type type)
> +{
> + u32 offset;
> +
> + offset = offs[slice].ft1_cfg;
> + regmap_update_bits(miig_rt, offset, FT1_CFG_MASK(n),
> + type << FT1_CFG_SHIFT(n));
> +}
> +
> +static void rx_class_sel_set_type(struct regmap *miig_rt, int slice, int n,
> + enum rx_class_sel_type type)
> +{
> + u32 offset;
> +
> + offset = offs[slice].rx_class_cfg1;
> + regmap_update_bits(miig_rt, offset, RX_CLASS_SEL_MASK(n),
> + type << RX_CLASS_SEL_SHIFT(n));
> +}
> +
> +static void rx_class_set_and(struct regmap *miig_rt, int slice, int n,
> + u32 data)
> +{
> + u32 offset;
> +
> + offset = RX_CLASS_N_REG(slice, n, RX_CLASS_AND_EN);
> + regmap_write(miig_rt, offset, data);
> +}
> +
> +static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
> + u32 data)
> +{
> + u32 offset;
> +
> + offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
> + regmap_write(miig_rt, offset, data);
> +}
> +
> +void icssg_class_set_host_mac_addr(struct regmap *miig_rt, u8 *mac)
> +{
> + regmap_write(miig_rt, MAC_INTERFACE_0, addr_to_da0(mac));
> + regmap_write(miig_rt, MAC_INTERFACE_1, addr_to_da1(mac));
> +}
> +
> +void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
> +{
> + regmap_write(miig_rt, offs[slice].mac0, addr_to_da0(mac));
> + regmap_write(miig_rt, offs[slice].mac1, addr_to_da1(mac));
> +}
> +
> +void icssg_class_disable_n(struct regmap *miig_rt, int slice, int n)
> +{
> + u32 data, offset;
> +
> + /* AND_EN = 0 */
> + rx_class_set_and(miig_rt, slice, n, 0);
> + /* OR_EN = 0 */
> + rx_class_set_or(miig_rt, slice, n, 0);
> +
> + /* set CFG1 to OR */
> + rx_class_sel_set_type(miig_rt, slice, n, RX_CLASS_SEL_TYPE_OR);
> +
> + /* configure gate */
> + offset = RX_CLASS_GATES_N_REG(slice, n);
> + regmap_read(miig_rt, offset, &data);
> + /* clear class_raw so we go through filters */
> + data &= ~RX_CLASS_GATES_RAW_MASK;
> + /* set allow and phase mask */
> + data |= RX_CLASS_GATES_ALLOW_MASK | RX_CLASS_GATES_PHASE_MASK;
> + regmap_write(miig_rt, offset, data);
> +}
> +
> +/* disable all RX traffic */
> +void icssg_class_disable(struct regmap *miig_rt, int slice)
> +{
> + int n;
> +
> + /* Enable RX_L2_G */
> + regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_RX_L2_G_EN,
> + ICSSG_CFG_RX_L2_G_EN);
> +
> + for (n = 0; n < ICSSG_NUM_CLASSIFIERS; n++)
> + icssg_class_disable_n(miig_rt, slice, n);
> +
> + /* FT1 Disabled */
> + for (n = 0; n < ICSSG_NUM_FT1_SLOTS; n++) {
> + u8 addr[] = { 0, 0, 0, 0, 0, 0, };
> +
> + rx_class_ft1_cfg_set_type(miig_rt, slice, n,
> + FT1_CFG_TYPE_DISABLED);
> + rx_class_ft1_set_da(miig_rt, slice, n, addr);
> + rx_class_ft1_set_da_mask(miig_rt, slice, n, addr);
> + }
> +
> + /* clear CFG2 */
> + regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
> +}
> +
> +void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
> +{
> + u32 data;
> +
> + /* defaults */
> + icssg_class_disable(miig_rt, slice);
> +
> + /* Setup Classifier */
> + /* match on Broadcast or MAC_PRU address */
> + data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
> +
> + /* multicast? */
> + if (allmulti)
> + data |= RX_CLASS_FT_MC;
> +
> + rx_class_set_or(miig_rt, slice, 0, data);
> +
> + /* set CFG1 for OR_OR_AND for classifier */
> + rx_class_sel_set_type(miig_rt, slice, 0,
> + RX_CLASS_SEL_TYPE_OR_OR_AND);
> +
> + /* clear CFG2 */
> + regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
> +}
> +
> +/* required for SR2 for SAV check */
> +void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
> +{
> + u8 mask_addr[] = { 0, 0, 0, 0, 0, 0, };
> +
> + rx_class_ft1_set_start_len(miig_rt, slice, 6, 6);
> + rx_class_ft1_set_da(miig_rt, slice, 0, mac_addr);
> + rx_class_ft1_set_da_mask(miig_rt, slice, 0, mask_addr);
> + rx_class_ft1_cfg_set_type(miig_rt, slice, 0, FT1_CFG_TYPE_EQ);
> +}
> diff --git a/drivers/net/ti/icssg_config.c b/drivers/net/ti/icssg_config.c
> new file mode 100644
> index 0000000000..b0ba870189
> --- /dev/null
> +++ b/drivers/net/ti/icssg_config.c
> @@ -0,0 +1,406 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* ICSSG Ethernet driver
> + *
> + * Copyright (C) 2018-2024 Texas Instruments Incorporated - http://www.ti.com
> + */
> +
> +#include <phy.h>
> +#include "icssg_prueth.h"
> +#include "icssg_switch_map.h"
> +#include "icss_mii_rt.h"
> +#include <dm/device_compat.h>
> +
> +/* TX IPG Values to be set for 100M and 1G link speeds. These values are
> + * in ocp_clk cycles. So need change if ocp_clk is changed for a specific
> + * h/w design.
> + */
> +
> +/* SR2.0 IPG is in rgmii_clk (125MHz) clock cycles + 1 */
> +#define MII_RT_TX_IPG_100M 0x17
> +#define MII_RT_TX_IPG_1G 0xb
> +
> +#define ICSSG_QUEUES_MAX 64
> +#define ICSSG_QUEUE_OFFSET 0xd00
> +#define ICSSG_QUEUE_PEEK_OFFSET 0xe00
> +#define ICSSG_QUEUE_CNT_OFFSET 0xe40
> +#define ICSSG_QUEUE_RESET_OFFSET 0xf40
> +
> +#define ICSSG_NUM_TX_QUEUES 8
> +
> +#define RECYCLE_Q_SLICE0 16
> +#define RECYCLE_Q_SLICE1 17
> +
> +#define ICSSG_NUM_OTHER_QUEUES 5 /* port, host and special
> queues */
> +
> +#define PORT_HI_Q_SLICE0 32
> +#define PORT_LO_Q_SLICE0 33
> +#define HOST_HI_Q_SLICE0 34
> +#define HOST_LO_Q_SLICE0 35
> +#define HOST_SPL_Q_SLICE0 40 /* Special Queue */
> +
> +#define PORT_HI_Q_SLICE1 36
> +#define PORT_LO_Q_SLICE1 37
> +#define HOST_HI_Q_SLICE1 38
> +#define HOST_LO_Q_SLICE1 39
> +#define HOST_SPL_Q_SLICE1 41 /* Special Queue */
> +
> +#define MII_RXCFG_DEFAULT (PRUSS_MII_RT_RXCFG_RX_ENABLE | \
> + PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
> + PRUSS_MII_RT_RXCFG_RX_L2_EN | \
> + PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
> +
> +#define MII_TXCFG_DEFAULT (PRUSS_MII_RT_TXCFG_TX_ENABLE | \
> + PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
> + PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
> + PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
> +
> +#define ICSSG_CFG_DEFAULT (ICSSG_CFG_TX_L1_EN | \
> + ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
> + ICSSG_CFG_TX_PRU_EN | /* SR2.0 only */ \
> + ICSSG_CFG_SGMII_MODE)
> +
> +#define FDB_GEN_CFG1 0x60
> +#define SMEM_VLAN_OFFSET 8
> +#define SMEM_VLAN_OFFSET_MASK GENMASK(25, 8)
> +
> +#define FDB_GEN_CFG2 0x64
> +#define FDB_VLAN_EN BIT(6)
> +#define FDB_HOST_EN BIT(2)
> +#define FDB_PRU1_EN BIT(1)
> +#define FDB_PRU0_EN BIT(0)
> +#define FDB_EN_ALL (FDB_PRU0_EN | FDB_PRU1_EN | \
> + FDB_HOST_EN | FDB_VLAN_EN)
> +
> +struct map {
> + int queue;
> + u32 pd_addr_start;
> + u32 flags;
> + bool special;
> +};
> +
> +struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
> + {
> + { PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
> + { PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
> + { HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
> + { HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
> + { HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
> + },
> + {
> + { PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
> + { PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
> + { HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
> + { HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
> + { HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
> + },
> +};
> +
> +static void icssg_config_mii_init(struct prueth_priv *priv, int slice)
> +{
> + struct prueth *prueth = priv->prueth;
> + struct regmap *mii_rt = prueth->mii_rt;
> + u32 txcfg_reg, pcnt_reg;
> + u32 txcfg;
> +
> + txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
> + PRUSS_MII_RT_TXCFG1;
> + pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
> + PRUSS_MII_RT_RX_PCNT1;
> +
> + txcfg = MII_TXCFG_DEFAULT;
> +
> + if (prueth->phy_interface == PHY_INTERFACE_MODE_MII && slice ==
> ICSS_MII0)
> + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
> + else if (prueth->phy_interface != PHY_INTERFACE_MODE_MII && slice ==
> ICSS_MII1)
> + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
> +
> + regmap_write(mii_rt, txcfg_reg, txcfg);
> + regmap_write(mii_rt, pcnt_reg, 0x1);
> +}
> +
> +static void icssg_miig_queues_init(struct prueth_priv *priv, int slice)
> +{
> + struct prueth *prueth = priv->prueth;
> + void __iomem *smem = (void __iomem *)prueth->shram.pa;
> + struct regmap *miig_rt = prueth->miig_rt;
> + int queue = 0, i, j;
> + u8 pd[ICSSG_SPECIAL_PD_SIZE];
> + u32 *pdword;
> +
> + /* reset hwqueues */
> + if (slice)
> + queue = ICSSG_NUM_TX_QUEUES;
> +
> + for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
> + queue++;
> + }
> +
> + queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
> +
> + for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
> + hwq_map[slice][i].queue);
> + }
> +
> + /* initialize packet descriptors in SMEM */
> + /* push pakcet descriptors to hwqueues */
> +
> + pdword = (u32 *)pd;
> + for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
> + struct map *mp;
> + int pd_size, num_pds;
> + u32 pdaddr;
> +
> + mp = &hwq_map[slice][j];
> + if (mp->special) {
> + pd_size = ICSSG_SPECIAL_PD_SIZE;
> + num_pds = ICSSG_NUM_SPECIAL_PDS;
> + } else {
> + pd_size = ICSSG_NORMAL_PD_SIZE;
> + num_pds = ICSSG_NUM_NORMAL_PDS;
> + }
> +
> + for (i = 0; i < num_pds; i++) {
> + memset(pd, 0, pd_size);
> +
> + pdword[0] &= cpu_to_le32(ICSSG_FLAG_MASK);
> + pdword[0] |= cpu_to_le32(mp->flags);
> + pdaddr = mp->pd_addr_start + i * pd_size;
> +
> + memcpy_toio(smem + pdaddr, pd, pd_size);
> + queue = mp->queue;
> + regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
> + pdaddr);
> + }
> + }
> +}
> +
> +void icssg_config_ipg(struct prueth_priv *priv, int speed, int mii)
> +{
> + struct prueth *prueth = priv->prueth;
> +
> + switch (speed) {
> + case SPEED_1000:
> + icssg_mii_update_ipg(prueth->mii_rt, mii, MII_RT_TX_IPG_1G);
> + break;
> + case SPEED_100:
> + icssg_mii_update_ipg(prueth->mii_rt, mii, MII_RT_TX_IPG_100M);
> + break;
> + default:
> + /* Other links speeds not supported */
> + pr_err("Unsupported link speed\n");
> + return;
> + }
> +}
> +
> +static void emac_r30_cmd_init(struct prueth_priv *priv)
> +{
> + struct prueth *prueth = priv->prueth;
> + struct icssg_r30_cmd *p;
> + int i;
> +
> + p = (struct icssg_r30_cmd *)(prueth->dram[priv->port_id].pa +
> MGR_R30_CMD_OFFSET);
> +
> + for (i = 0; i < 4; i++)
> + writel(EMAC_NONE, &p->cmd[i]);
> +}
> +
> +static int emac_r30_is_done(struct prueth_priv *priv)
> +{
> + struct prueth *prueth = priv->prueth;
> + const struct icssg_r30_cmd *p;
> + int i;
> + u32 cmd;
> +
> + p = (const struct icssg_r30_cmd *)(prueth->dram[priv->port_id].pa +
> MGR_R30_CMD_OFFSET);
> +
> + for (i = 0; i < 4; i++) {
> + cmd = readl(&p->cmd[i]);
> + if (cmd != EMAC_NONE)
> + return 0;
> + }
> +
> + return 1;
> +}
> +
> +static int prueth_emac_buffer_setup(struct prueth_priv *priv)
> +{
> + struct prueth *prueth = priv->prueth;
> + struct icssg_buffer_pool_cfg *bpool_cfg;
> + struct icssg_rxq_ctx *rxq_ctx;
> + int slice = priv->port_id;
> + u32 addr;
> + int i;
> +
> + /* Layout to have 64KB aligned buffer pool
> + * |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
> + */
> +
> + addr = lower_32_bits(prueth->sram_pa);
> + if (slice)
> + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
> +
> + if (addr % SZ_64K) {
> + dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
> + return -EINVAL;
> + }
> +
> + bpool_cfg = (struct icssg_buffer_pool_cfg
> *)(prueth->dram[priv->port_id].pa + BUFFER_POOL_0_ADDR_OFFSET);
> + /* workaround for f/w bug. bpool 0 needs to be initilalized */
> + bpool_cfg[0].addr = cpu_to_le32(addr);
> + bpool_cfg[0].len = 0;
> +
> + for (i = PRUETH_EMAC_BUF_POOL_START;
> + i < (PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS);
> + i++) {
> + bpool_cfg[i].addr = cpu_to_le32(addr);
> + bpool_cfg[i].len = cpu_to_le32(PRUETH_EMAC_BUF_POOL_SIZE);
> + addr += PRUETH_EMAC_BUF_POOL_SIZE;
> + }
> +
> + if (!slice)
> + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
> + else
> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
> +
> + rxq_ctx = (struct icssg_rxq_ctx *)(prueth->dram[priv->port_id].pa +
> HOST_RX_Q_PRE_CONTEXT_OFFSET);
> +
> + for (i = 0; i < 3; i++)
> + rxq_ctx->start[i] = cpu_to_le32(addr);
> +
> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
> + rxq_ctx->end = cpu_to_le32(addr);
> +
> + /* Express RX buffer queue */
> + rxq_ctx = (struct icssg_rxq_ctx *)(prueth->dram[priv->port_id].pa +
> HOST_RX_Q_EXP_CONTEXT_OFFSET);
> + for (i = 0; i < 3; i++)
> + rxq_ctx->start[i] = cpu_to_le32(addr);
> +
> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
> + rxq_ctx->end = cpu_to_le32(addr);
> +
> + return 0;
> +}
> +
> +static void icssg_init_emac_mode(struct prueth *prueth)
> +{
> + u8 mac[6] = { 0 };
> +
> + regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1,
> SMEM_VLAN_OFFSET_MASK, 0);
> + regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
> + /* Clear host MAC address */
> + icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
> +}
> +
> +int icssg_config(struct prueth_priv *priv)
> +{
> + struct prueth *prueth = priv->prueth;
> + void *config = (void *)(prueth->dram[priv->port_id].pa +
> ICSSG_CONFIG_OFFSET);
> + u8 *cfg_byte_ptr = config;
> + struct icssg_flow_cfg *flow_cfg;
> + u32 mask;
> + int ret;
> +
> + int slice = priv->port_id;
> +
> + icssg_init_emac_mode(prueth);
> +
> + memset_io(config, 0, TAS_GATE_MASK_LIST0);
> + icssg_miig_queues_init(priv, slice);
> +
> + prueth->speed = SPEED_1000;
> + prueth->duplex = DUPLEX_FULL;
> + if (!phy_interface_is_rgmii(priv->phydev)) {
> + prueth->speed = SPEED_100;
> + prueth->duplex = DUPLEX_FULL;
> + }
> +
> + regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET,
> + ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
> + icssg_miig_set_interface_mode(prueth->miig_rt, ICSS_MII0,
> prueth->phy_interface);
> + icssg_miig_set_interface_mode(prueth->miig_rt, ICSS_MII1,
> prueth->phy_interface);
> + icssg_config_mii_init(priv, slice);
> +
> + icssg_config_ipg(priv, SPEED_1000, slice);
> + icssg_update_rgmii_cfg(prueth->miig_rt, SPEED_1000, true, slice, priv);
> +
> + /* set GPI mode */
> + pruss_cfg_gpimode(prueth->pruss, slice, PRUSS_GPI_MODE_MII);
> +
> + /* enable XFR shift for PRU and RTU */
> + mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
> + pruss_cfg_update(prueth->pruss, PRUSS_CFG_SPP, mask, mask);
> +
> + flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
> + flow_cfg->rx_base_flow = prueth->dma_rx.id;
> + flow_cfg->mgm_base_flow = 0;
> + *(cfg_byte_ptr + SPL_PKT_DEFAULT_PRIORITY) = 0;
> + *(cfg_byte_ptr + QUEUE_NUM_UNTAGGED) = 0x0;
> +
> + ret = prueth_emac_buffer_setup(priv);
> +
> + if (ret)
> + return ret;
> +
> + emac_r30_cmd_init(priv);
> + return 0;
> +}
> +
> +/* commands to program ICSSG R30 registers */
> +static struct icssg_r30_cmd emac_r32_bitmask[] = {
> + {{0xffff0004, 0xffff0100, 0xffff0004, EMAC_NONE}}, /*
> EMAC_PORT_DISABLE */
> + {{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}}, /*
> EMAC_PORT_BLOCK */
> + {{0xffbb0000, 0xfcff0000, 0xdcfb0000, EMAC_NONE}}, /*
> EMAC_PORT_FORWARD */
> + {{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}}, /*
> EMAC_PORT_FORWARD_WO_LEARNING */
> + {{0xffff0001, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT ALL */
> + {{0xfffe0002, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT
> TAGGED */
> + {{0xfffc0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT
> UNTAGGED and PRIO */
> + {{EMAC_NONE, 0xffff0020, EMAC_NONE, EMAC_NONE}}, /* TAS Trigger
> List change */
> + {{EMAC_NONE, 0xdfff1000, EMAC_NONE, EMAC_NONE}}, /* TAS set
> state ENABLE*/
> + {{EMAC_NONE, 0xefff2000, EMAC_NONE, EMAC_NONE}}, /* TAS set
> state RESET*/
> + {{EMAC_NONE, 0xcfff0000, EMAC_NONE, EMAC_NONE}}, /* TAS set
> state DISABLE*/
> + {{EMAC_NONE, EMAC_NONE, 0xffff0400, EMAC_NONE}}, /* UC flooding
> ENABLE*/
> + {{EMAC_NONE, EMAC_NONE, 0xfbff0000, EMAC_NONE}}, /* UC flooding
> DISABLE*/
> + {{EMAC_NONE, EMAC_NONE, 0xffff0800, EMAC_NONE}}, /* MC flooding
> ENABLE*/
> + {{EMAC_NONE, EMAC_NONE, 0xf7ff0000, EMAC_NONE}}, /* MC flooding
> DISABLE*/
> + {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption
> on Tx ENABLE*/
> + {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}} /* Preemption
> on Tx DISABLE*/
> +};
> +
> +int emac_set_port_state(struct prueth_priv *priv,
> + enum icssg_port_state_cmd cmd)
> +{
> + struct prueth *prueth = priv->prueth;
> + struct icssg_r30_cmd *p;
> + int ret = -ETIMEDOUT;
> + int timeout = 10;
> + int i;
> +
> + p = (struct icssg_r30_cmd *)(prueth->dram[priv->port_id].pa +
> MGR_R30_CMD_OFFSET);
> +
> + if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
> + dev_err(prueth->dev, "invalid port command\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < 4; i++)
> + writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
> +
> + /* wait for done */
> + while (timeout) {
> + if (emac_r30_is_done(priv)) {
> + ret = 0;
> + break;
> + }
> +
> + udelay(2000);
> + timeout--;
> + }
> +
> + if (ret == -ETIMEDOUT)
> + dev_err(prueth->dev, "timeout waiting for command done\n");
> +
> + return ret;
> +}
> diff --git a/drivers/net/ti/icssg_config.h b/drivers/net/ti/icssg_config.h
> new file mode 100644
> index 0000000000..412dbf51c7
> --- /dev/null
> +++ b/drivers/net/ti/icssg_config.h
> @@ -0,0 +1,177 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Texas Instruments ICSSG Ethernet driver
> + *
> + * Copyright (C) 2018-2024 Texas Instruments Incorporated -
> http://www.ti.com/
> + *
> + */
> +
> +#ifndef __NET_TI_ICSSG_CONFIG_H
> +#define __NET_TI_ICSSG_CONFIG_H
> +
> +struct icssg_buffer_pool_cfg {
> + __le32 addr;
> + __le32 len;
> +} __packed;
> +
> +struct icssg_flow_cfg {
> + __le16 rx_base_flow;
> + __le16 mgm_base_flow;
> +} __packed;
> +
> +/* Config area lies in shared RAM */
> +#define ICSSG_CONFIG_OFFSET_SLICE0 0
> +#define ICSSG_CONFIG_OFFSET_SLICE1 0x8000
> +
> +/* pstate speed/duplex command to set speed and duplex settings
> + * in firmware.
> + * Command format : 0x8102ssPN. ss - sequence number: currently not
> + * used by driver, P - port number: For switch, N - Speed/Duplex state
> + * - Possible values of N:
> + * 0x0 - 10Mbps/Half duplex ;
> + * 0x8 - 10Mbps/Full duplex ;
> + * 0x2 - 100Mbps/Half duplex;
> + * 0xa - 100Mbps/Full duplex;
> + * 0xc - 1Gbps/Full duplex;
> + * NOTE: The above are same as bits [3..1](slice 0) or bits [8..6](slice 1)
> of
> + * RGMII CFG register. So suggested to read the register to populate the
> command
> + * bits.
> + */
> +#define ICSSG_PSTATE_SPEED_DUPLEX_CMD 0x81020000
> +#define ICSSG_PSTATE_FULL_DUPLEX BIT(3)
> +#define ICSSG_PSTATE_SPEED_100 BIT(1)
> +#define ICSSG_PSTATE_SPEED_1000 BIT(2)
> +
> +/* Flow IDs used in config structure to firmware. Should match with
> + * flow_id in struct dma for rx channels.
> + */
> +#define ICSSG_RX_CHAN_FLOW_ID 0 /* flow id for host port */
> +#define ICSSG_RX_MGM_CHAN_FLOW_ID 1 /* flow id for command response */
> +
> +/* Used to notify the FW of the current link speed */
> +#define PORT_LINK_SPEED_OFFSET 0x00A8
> +
> +#define FW_LINK_SPEED_1G (0x00)
> +#define FW_LINK_SPEED_100M (0x01)
> +#define FW_LINK_SPEED_10M (0x02)
> +#define FW_LINK_SPEED_HD (0x80)
> +
> +#define PRUETH_PKT_TYPE_CMD 0x10
> +#define PRUETH_NAV_PS_DATA_SIZE 16 /* Protocol specific data size
> */
> +#define PRUETH_NAV_SW_DATA_SIZE 16 /* SW related data size */
> +#define PRUETH_MAX_RX_FLOWS 1 /* excluding default flow */
> +#define PRUETH_RX_FLOW_DATA 0 /* FIXME: f/w bug to change to highest
> priority flow */
> +
> +#define PRUETH_EMAC_BUF_POOL_SIZE SZ_8K
> +#define PRUETH_EMAC_POOLS_PER_SLICE 24
> +#define PRUETH_EMAC_BUF_POOL_START 8
> +#define PRUETH_NUM_BUF_POOLS 8
> +#define PRUETH_EMAC_RX_CTX_BUF_SIZE SZ_16K /* per slice */
> +#define MSMC_RAM_SIZE (2 * (PRUETH_EMAC_BUF_POOL_SIZE *
> PRUETH_NUM_BUF_POOLS + \
> + PRUETH_EMAC_RX_CTX_BUF_SIZE))
> +
> +struct icssg_rxq_ctx {
> + __le32 start[3];
> + __le32 end;
> +} __packed;
> +
> +/* Load time Fiwmware Configuration */
> +
> +#define ICSSG_FW_MGMT_CMD_HEADER 0x81
> +#define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
> +#define ICSSG_FW_MGMT_CMD_TYPE 0x04
> +#define ICSSG_FW_MGMT_PKT 0x80000000
> +
> +struct icssg_r30_cmd {
> + u32 cmd[4];
> +} __packed;
> +
> +enum icssg_port_state_cmd {
> + ICSSG_EMAC_PORT_DISABLE = 0,
> + ICSSG_EMAC_PORT_BLOCK,
> + ICSSG_EMAC_PORT_FORWARD,
> + ICSSG_EMAC_PORT_FORWARD_WO_LEARNING,
> + ICSSG_EMAC_PORT_ACCEPT_ALL,
> + ICSSG_EMAC_PORT_ACCEPT_TAGGED,
> + ICSSG_EMAC_PORT_ACCEPT_UNTAGGED_N_PRIO,
> + ICSSG_EMAC_PORT_TAS_TRIGGER,
> + ICSSG_EMAC_PORT_TAS_ENABLE,
> + ICSSG_EMAC_PORT_TAS_RESET,
> + ICSSG_EMAC_PORT_TAS_DISABLE,
> + ICSSG_EMAC_PORT_UC_FLOODING_ENABLE,
> + ICSSG_EMAC_PORT_UC_FLOODING_DISABLE,
> + ICSSG_EMAC_PORT_MC_FLOODING_ENABLE,
> + ICSSG_EMAC_PORT_MC_FLOODING_DISABLE,
> + ICSSG_EMAC_PORT_PREMPT_TX_ENABLE,
> + ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
> + ICSSG_EMAC_PORT_MAX_COMMANDS
> +};
> +
> +#define EMAC_NONE 0xffff0000
> +#define EMAC_PRU0_P_DI 0xffff0004
> +#define EMAC_PRU1_P_DI 0xffff0040
> +#define EMAC_TX_P_DI 0xffff0100
> +
> +#define EMAC_PRU0_P_EN 0xfffb0000
> +#define EMAC_PRU1_P_EN 0xffbf0000
> +#define EMAC_TX_P_EN 0xfeff0000
> +
> +#define EMAC_P_BLOCK 0xffff0040
> +#define EMAC_TX_P_BLOCK 0xffff0200
> +#define EMAC_P_UNBLOCK 0xffbf0000
> +#define EMAC_TX_P_UNBLOCK 0xfdff0000
> +#define EMAC_LEAN_EN 0xfff70000
> +#define EMAC_LEAN_DI 0xffff0008
> +
> +#define EMAC_ACCEPT_ALL 0xffff0001
> +#define EMAC_ACCEPT_TAG 0xfffe0002
> +#define EMAC_ACCEPT_PRIOR 0xfffc0000
> +
> +/* Config area lies in DRAM */
> +#define ICSSG_CONFIG_OFFSET 0x0
> +
> +#define ICSSG_NUM_NORMAL_PDS 64
> +#define ICSSG_NUM_SPECIAL_PDS 16
> +
> +#define ICSSG_NORMAL_PD_SIZE 8
> +#define ICSSG_SPECIAL_PD_SIZE 20
> +
> +#define ICSSG_FLAG_MASK 0xff00ffff
> +
> +struct icssg_setclock_desc {
> + u8 request;
> + u8 restore;
> + u8 acknowledgment;
> + u8 cmp_status;
> + u32 margin;
> + u32 cyclecounter0_set;
> + u32 cyclecounter1_set;
> + u32 iepcount_set;
> + u32 rsvd1;
> + u32 rsvd2;
> + u32 CMP0_current;
> + u32 iepcount_current;
> + u32 difference;
> + u32 cyclecounter0_new;
> + u32 cyclecounter1_new;
> + u32 CMP0_new;
> +} __packed;
> +
> +#define ICSSG_CMD_POP_SLICE0 56
> +#define ICSSG_CMD_POP_SLICE1 60
> +
> +#define ICSSG_CMD_PUSH_SLICE0 57
> +#define ICSSG_CMD_PUSH_SLICE1 61
> +
> +#define ICSSG_RSP_POP_SLICE0 58
> +#define ICSSG_RSP_POP_SLICE1 62
> +
> +#define ICSSG_RSP_PUSH_SLICE0 56
> +#define ICSSG_RSP_PUSH_SLICE1 60
> +
> +#define ICSSG_TS_POP_SLICE0 59
> +#define ICSSG_TS_POP_SLICE1 63
> +
> +#define ICSSG_TS_PUSH_SLICE0 40
> +#define ICSSG_TS_PUSH_SLICE1 41
> +
> +#endif /* __NET_TI_ICSSG_CONFIG_H */
> diff --git a/drivers/net/ti/icssg_prueth.h b/drivers/net/ti/icssg_prueth.h
> new file mode 100644
> index 0000000000..a7627a77d8
> --- /dev/null
> +++ b/drivers/net/ti/icssg_prueth.h
> @@ -0,0 +1,83 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Texas Instruments K3 AM65 Ethernet Switch SubSystem Driver
> + *
> + * Copyright (C) 2018-2024 Texas Instruments Incorporated -
> http://www.ti.com/
> + *
> + */
> +
> +#ifndef __NET_TI_ICSSG_PRUETH_H
> +#define __NET_TI_ICSSG_PRUETH_H
> +
> +#include <asm/io.h>
> +#include <clk.h>
> +#include <dm/lists.h>
> +#include <dm/ofnode.h>
> +#include <dm/device.h>
> +#include <dma-uclass.h>
> +#include <regmap.h>
> +#include <linux/sizes.h>
> +#include <linux/pruss_driver.h>
> +#include "icssg_config.h"
> +#include "icssg_switch_map.h"
> +
> +void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac);
> +void icssg_class_set_host_mac_addr(struct regmap *miig_rt, u8 *mac);
> +void icssg_class_disable(struct regmap *miig_rt, int slice);
> +void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti);
> +void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr);
> +
> +enum prueth_mac {
> + PRUETH_MAC0 = 0,
> + PRUETH_MAC1,
> + PRUETH_NUM_MACS,
> +};
> +
> +enum prueth_port {
> + PRUETH_PORT_HOST = 0, /* host side port */
> + PRUETH_PORT_MII0, /* physical port MII 0 */
> + PRUETH_PORT_MII1, /* physical port MII 1 */
> +};
> +
> +struct prueth {
> + struct udevice *dev;
> + struct udevice *pruss;
> + struct regmap *miig_rt;
> + struct regmap *mii_rt;
> + fdt_addr_t mdio_base;
> + struct pruss_mem_region shram;
> + struct pruss_mem_region dram[PRUETH_NUM_MACS];
> + phys_addr_t tmaddr;
> + struct mii_dev *bus;
> + u32 sram_pa;
> + ofnode eth_node[PRUETH_NUM_MACS];
> + u32 mdio_freq;
> + int phy_interface;
> + struct clk mdiofck;
> + struct dma dma_tx;
> + struct dma dma_rx;
> + struct dma dma_rx_mgm;
> + u32 rx_next;
> + u32 rx_pend;
> + int slice;
> + bool mdio_manual_mode;
> + int speed;
> + int duplex;
> +};
> +
> +struct prueth_priv {
> + struct udevice *dev;
> + struct prueth *prueth;
> + u32 port_id;
> + struct phy_device *phydev;
> + bool has_phy;
> + ofnode phy_node;
> + u32 phy_addr;
> + int phy_interface;
> +};
> +
> +/* config helpers */
> +void icssg_config_ipg(struct prueth_priv *priv, int speed, int mii);
> +int icssg_config(struct prueth_priv *priv);
> +int emac_set_port_state(struct prueth_priv *priv, enum icssg_port_state_cmd
> cmd);
> +
> +#endif /* __NET_TI_ICSSG_PRUETH_H */
--
Regards,
Ravi
