Hi guys, On Wed, Apr 10, 2024 at 02:02:21PM +0200, Quentin Schulz wrote: > Hi Alexey, > > On 4/10/24 12:58, Alexey Romanov wrote: > > Currently, fastboot protocol in U-Boot has no opportunity > > to execute vendor custom code with verifed boot. This patch > > introduce new fastboot subcommand fastboot oem board:<cmd>, > > which allow to run custom oem_board function. > > > > Default implementation is __weak. Vendor must redefine it in > > board/ folder with his own logic. > > > > For example, some vendors have their custom nand/emmc partition > > flashing or erasing. Here some typical command for such use cases: > > > > - flashing: > > > > $ fastboot stage bootloader.img > > $ fastboot oem board:write_bootloader > > > > - erasing: > > > > $ fastboot oem board:erase_env > > > > Signed-off-by: Alexey Romanov <avroma...@salutedevices.com> > > Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> > > --- > > doc/android/fastboot.rst | 18 ++++++++++++++++++ > > drivers/fastboot/Kconfig | 7 +++++++ > > drivers/fastboot/fb_command.c | 30 ++++++++++++++++++++++++++++++ > > include/fastboot.h | 1 + > > 4 files changed, 56 insertions(+) > > > > diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst > > index 1ad8a897c8..2a627f9890 100644 > > --- a/doc/android/fastboot.rst > > +++ b/doc/android/fastboot.rst > > @@ -29,6 +29,7 @@ The following OEM commands are supported (if enabled): > > with <arg> = boot_ack boot_partition > > - ``oem bootbus`` - this executes ``mmc bootbus %x %s`` to configure eMMC > > - ``oem run`` - this executes an arbitrary U-Boot command > > +- ``oem board`` - this executes a custom board function which is defined > > by the vendor > > Support for both eMMC and NAND devices is included. > > @@ -245,6 +246,23 @@ including multiple commands (using e.g. ``;`` or > > ``&&``) and control structures > > (``if``, ``while``, etc.). The exit code of ``fastboot`` will reflect the > > exit > > code of the command you ran. > > +Running Custom Vendor Code > > +^^^^^^^^^^^^^^^^^^^^^^^^^^ > > + > > +U-Boot allows you to execute custom fastboot logic, which can be defined > > +in board/ files. It can still be used for production devices with verified > > +boot, because the vendor define logic at compile time by implementing > > I think it should be "defines" here?
Yep. If there are no more comments, maybe Mattijs will correct this when he picks up a patch? So that I don't send a new series with typo fix :) > > Reviewed-by: Quentin Schulz <quentin.sch...@theobroma-systems.com> > > Thanks, > Quentin -- Thank you, Alexey
