[PATCH RFC 14/15] spl: Support SPI NAND boot in UBI

[John Watts]

UBI supports traditional NAND and oneNAND devices already, so add
support for booting from SPI NAND devices.

Signed-off-by: John Watts <cont...@jookia.org>
---
 common/spl/spl_ubi.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/common/spl/spl_ubi.c b/common/spl/spl_ubi.c
index d7ab9efd11..72b4b195ed 100644
--- a/common/spl/spl_ubi.c
+++ b/common/spl/spl_ubi.c
@@ -21,6 +21,13 @@ int spl_ubi_load_image(struct spl_image_info *spl_image,
        int ret = 1;
 
        switch (bootdev->boot_device) {
+#ifdef CONFIG_SPL_SPINAND_SUPPORT
+       case BOOT_DEVICE_SPINAND:
+               spinand_init();
+               info.read = spinand_spl_read_block;
+               info.peb_size = CONFIG_SPL_SPINAND_BLOCK_SIZE;
+               break;
+#endif
 #ifdef CONFIG_SPL_NAND_SUPPORT
        case BOOT_DEVICE_NAND:
                nand_init();
@@ -77,12 +84,18 @@ int spl_ubi_load_image(struct spl_image_info *spl_image,
        if (!ret)
                spl_parse_image_header(spl_image, bootdev, header);
 out:
+#ifdef CONFIG_SPL_SPINAND_SUPPORT
+       if (bootdev->boot_device == BOOT_DEVICE_SPINAND)
+               spinand_deselect();
+#endif
 #ifdef CONFIG_SPL_NAND_SUPPORT
        if (bootdev->boot_device == BOOT_DEVICE_NAND)
                nand_deselect();
 #endif
        return ret;
 }
-/* Use priorty 0 so that Ubi will override NAND and ONENAND methods */
+
+/* Use priority 0 so that UBI will override all NAND methods */
 SPL_LOAD_IMAGE_METHOD("NAND", 0, BOOT_DEVICE_NAND, spl_ubi_load_image);
 SPL_LOAD_IMAGE_METHOD("OneNAND", 0, BOOT_DEVICE_ONENAND, spl_ubi_load_image);
+SPL_LOAD_IMAGE_METHOD("SPINAND", 0, BOOT_DEVICE_SPINAND, spl_ubi_load_image);

-- 
2.44.0