Hi Aaron, Le 12/04/2011 09:53, Aaron Williams a écrit : > This patch corrects the addresses used when working with Spansion/AMD FLASH > chips. Addressing for 8 and 16 bits is almost identical except in the 16 > bit case the LSB of the address is always 0. The confusion arose because > the addresses in the datasheet for the 16 bit mode are word addresses but > the CFI driver assumed they were byte addresses. > > I have only been able to test this on our Octeon boards which use either > an 8 or 16 bit bus. I have not tested 32-bits or when there are multiple > parts in parallel on a wider bus. > > Several other people have also reported success with this patch. > > -Aaron Williams > > > Signed-off-by: Aaron Williams<aaron.willi...@caviumnetworks.com> > --- > drivers/mtd/cfi_flash.c | 66 > +++++++++++++++++++++++++++++++--------------- > include/mtd/cfi_flash.h | 43 ++++++++++++++++-------------- > 2 files changed, 67 insertions(+), 42 deletions(-)
That's V2 of http://patchwork.ozlabs.org/patch/89429/, isn't it ? Then it should have V2 tag and patch history. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
