> Subject: Re: [PATCH v6 5/5] imx93: convert to OF_UPSTREAM > > > Hello, > > I was able to test this series on the imx93-phyboard-segin. Up to that > specific > commit no issue to report. > > That specific commit however, using an updated dts subtree at 2639a0e2fd, > fails to boot. > > There is no more garbage on the UART, but the boot stops after BL31 is > started: > > U-Boot SPL 2024.04-rc5-00388-gf81e4e85fd6-dirty (Apr 14 2024 - 12:15:51 > +0200) > SOC: 0xa0009300 > LC: 0x40040 > M33 prepare ok > Normal Boot > WDT: Started wdog@42490000 with servicing every 1000ms (40s timeout) > Trying to boot from BOOTROM > Boot Stage: Primary boot > image offset 0x8000, pagesize 0x200, ivt offset 0x0 Load image from 0x45c00 > by ROM_API > NOTICE: BL31: v2.8(release):lf-6.1.36-2.1.0-0-g1a3beeab6-dirty > NOTICE: BL31: Built : 11:39:38, Aug 7 2023 > > Not sure where that could come from.
Which dts upstream tag are u using? Do you have time to debug the issue? I not have the board, so not sure what happens here. Regards, Peng. > > Mathieu
