On 4/14/24 20:38, Marek Vasut wrote:
> The source file is in arch/arm/mach-stm32mp/ecdsa_romapi.c and not
> in arch/arm/mach-stm32mp/stm32mp1/ecdsa_romapi.c . There are two
> Makefile entries in each subdirectory. Drop the bogus one and keep
> only the correct one, the one in arch/arm/mach-stm32mp/Makefile .
>
> Signed-off-by: Marek Vasut <[email protected]>
> ---
> Cc: Igor Opaniuk <[email protected]>
> Cc: Patrice Chotard <[email protected]>
> Cc: Patrick Delaunay <[email protected]>
> Cc: Simon Glass <[email protected]
> Cc: Simon Glass <[email protected]>
> Cc: Tom Rini <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
> arch/arm/mach-stm32mp/stm32mp1/Makefile | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile
> b/arch/arm/mach-stm32mp/stm32mp1/Makefile
> index 857148747ef..ebae50f66c9 100644
> --- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
> +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
> @@ -8,7 +8,6 @@ obj-y += cpu.o
> obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
> obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
>
> -obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
> ifdef CONFIG_SPL_BUILD
> obj-y += spl.o
> obj-y += tzc400.o
Applied on u-boot-stm32/master
