> -----Original Message-----
> From: Tom Rini <tr...@konsulko.com>
> Sent: Thursday, May 2, 2024 10:30 AM
> To: u-boot@lists.denx.de
> Cc: Weijie Gao <weijie....@mediatek.com>; GSS_MTK_Uboot_upstream 
> <gss_mtk_uboot_upstr...@mediatek.com>;
> Peng Fan <peng....@nxp.com>; Jaehoon Chung <jh80.ch...@samsung.com>
> Subject: [PATCH 01/81] mmc: Migrate MMC_SUPPORTS_TUNING to Kconfig
>
> The constraints on the MMC_SUPPORTS_TUNING symbol can easily be
> expressed in Kconfig (with the addition of SPL_MMC_SUPPORTS_TUNING).
> Furthermore, in order to remove <common.h> from the MMC subsystem, the
> way this symbol is used today needs to be changed in order to continue
> functioning.
>
> Signed-off-by: Tom Rini <tr...@konsulko.com>

Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>

Best Regards,
Jaehoon Chung

> ---
> Cc: Weijie Gao <weijie....@mediatek.com>
> Cc: GSS_MTK_Uboot_upstream <gss_mtk_uboot_upstr...@mediatek.com>
> Cc: Peng Fan <peng....@nxp.com>
> Cc: Jaehoon Chung <jh80.ch...@samsung.com>
> ---
>  arch/arm/mach-mediatek/Kconfig     |  1 +
>  arch/mips/mach-mtmips/Kconfig      |  1 +
>  drivers/mmc/Kconfig                | 11 +++++++++++
>  drivers/mmc/am654_sdhci.c          |  6 +++---
>  drivers/mmc/fsl_esdhc.c            |  4 ++--
>  drivers/mmc/fsl_esdhc_imx.c        |  8 ++++----
>  drivers/mmc/mmc-uclass.c           |  2 +-
>  drivers/mmc/mmc.c                  | 12 ++++++------
>  drivers/mmc/mtk-sd.c               |  4 ++--
>  drivers/mmc/octeontx_hsmmc.c       | 12 ++++++------
>  drivers/mmc/omap_hsmmc.c           |  4 ++--
>  drivers/mmc/sdhci-cadence.c        |  2 +-
>  drivers/mmc/sdhci.c                |  4 ++--
>  include/configs/mt7621.h           |  3 ---
>  include/configs/mt7623.h           |  3 ---
>  include/configs/octeontx2_common.h |  5 -----
>  include/mmc.h                      |  9 +--------
>  17 files changed, 43 insertions(+), 48 deletions(-)
>
> diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
> index 82018bd9d3e3..ff1fdee5c8da 100644
> --- a/arch/arm/mach-mediatek/Kconfig
> +++ b/arch/arm/mach-mediatek/Kconfig
> @@ -23,6 +23,7 @@ config TARGET_MT7622
>  config TARGET_MT7623
>       bool "MediaTek MT7623 SoC"
>       select CPU_V7A
> +     select MMC_SUPPORTS_TUNING
>       help
>         The MediaTek MT7623 is a ARM-based SoC with a quad-core Cortex-A7
>         including NEON and GPU, Mali-450 graphics, several DDR3 options,
> diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
> index 15b2792e619b..3fcd0b8465b4 100644
> --- a/arch/mips/mach-mtmips/Kconfig
> +++ b/arch/mips/mach-mtmips/Kconfig
> @@ -80,6 +80,7 @@ config SOC_MT7621
>       bool "MT7621"
>       select MIPS_CM
>       select MIPS_L2_CACHE
> +     select MMC_SUPPORTS_TUNING
>       select SYS_CACHE_SHIFT_5
>       select SYS_MIPS_CACHE_INIT_RAM_LOAD
>       select PINCTRL_MT7621
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 549634891a36..d0944793c92d 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -147,9 +147,16 @@ config SPL_MMC_IO_VOLTAGE
>         support. For eMMC this not mandatory, but not enabling this option may
>         prevent the driver of using the faster modes.
>
> +config MMC_SUPPORTS_TUNING
> +     bool
> +
> +config SPL_MMC_SUPPORTS_TUNING
> +     bool
> +
>  config MMC_UHS_SUPPORT
>       bool "enable UHS support"
>       depends on MMC_IO_VOLTAGE
> +     select MMC_SUPPORTS_TUNING
>       help
>         The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
>         cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
> @@ -158,6 +165,7 @@ config MMC_UHS_SUPPORT
>  config SPL_MMC_UHS_SUPPORT
>       bool "enable UHS support in SPL"
>       depends on SPL_MMC_IO_VOLTAGE
> +     select SPL_MMC_SUPPORTS_TUNING
>       help
>         The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
>         cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
> @@ -193,6 +201,7 @@ config SPL_MMC_HS400_SUPPORT
>
>  config MMC_HS200_SUPPORT
>       bool "enable HS200 support"
> +     select MMC_SUPPORTS_TUNING
>       help
>         The HS200 mode is support by some eMMC. The bus frequency is up to
>         200MHz. This mode requires tuning the IO.
> @@ -200,6 +209,7 @@ config MMC_HS200_SUPPORT
>  config SPL_MMC_HS200_SUPPORT
>       bool "enable HS200 support in SPL"
>       depends on SPL_MMC
> +     select SPL_MMC_SUPPORTS_TUNING
>       help
>         The HS200 mode is support by some eMMC. The bus frequency is up to
>         200MHz. This mode requires tuning the IO.
> @@ -347,6 +357,7 @@ config MMC_OCTEONTX
>       bool "Marvell Octeon Multimedia Card Interface support"
>       depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
>       depends on DM_MMC
> +     select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2
>       help
>         This selects the Octeon Multimedia card Interface.
>         If you have an OcteonTX/TX2 or MIPS Octeon board with a
> diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
> index fadab7d40bb7..ffb461c2f6c1 100644
> --- a/drivers/mmc/am654_sdhci.c
> +++ b/drivers/mmc/am654_sdhci.c
> @@ -397,7 +397,7 @@ static void am654_sdhci_write_b(struct sdhci_host *host, 
> u8 val, int reg)
>
>       writeb(val, host->ioaddr + reg);
>  }
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  #define ITAPDLY_LENGTH 32
>  #define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1)
>
> @@ -500,7 +500,7 @@ static int am654_sdhci_execute_tuning(struct mmc *mmc, u8 
> opcode)
>  }
>  #endif
>  const struct sdhci_ops am654_sdhci_ops = {
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .platform_execute_tuning = am654_sdhci_execute_tuning,
>  #endif
>       .deferred_probe         = am654_sdhci_deferred_probe,
> @@ -560,7 +560,7 @@ static int j721e_4bit_sdhci_set_ios_post(struct 
> sdhci_host *host)
>  }
>
>  const struct sdhci_ops j721e_4bit_sdhci_ops = {
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .platform_execute_tuning = am654_sdhci_execute_tuning,
>  #endif
>       .deferred_probe         = am654_sdhci_deferred_probe,
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index 595d88bd5625..5ac1c6a0e9e1 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -1102,7 +1102,7 @@ static int fsl_esdhc_reinit(struct udevice *dev)
>       return esdhc_init_common(priv, &plat->mmc);
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
>  {
>       struct fsl_esdhc_plat *plat = dev_get_plat(dev);
> @@ -1175,7 +1175,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
>       .get_cd         = fsl_esdhc_get_cd,
>       .send_cmd       = fsl_esdhc_send_cmd,
>       .set_ios        = fsl_esdhc_set_ios,
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .execute_tuning = fsl_esdhc_execute_tuning,
>  #endif
>       .reinit = fsl_esdhc_reinit,
> diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
> index b74c01400205..8b2ef9391f3e 100644
> --- a/drivers/mmc/fsl_esdhc_imx.c
> +++ b/drivers/mmc/fsl_esdhc_imx.c
> @@ -635,7 +635,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, 
> struct mmc *mmc, uint clock)
>       priv->clock = clock;
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static int esdhc_change_pinstate(struct udevice *dev)
>  {
>       struct fsl_esdhc_priv *priv = dev_get_priv(dev);
> @@ -913,7 +913,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv 
> *priv, struct mmc *mmc)
>       int ret __maybe_unused;
>       u32 clock;
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       /*
>        * call esdhc_set_timing() before update the clock rate,
>        * This is because current we support DDR and SDR mode,
> @@ -951,7 +951,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv 
> *priv, struct mmc *mmc)
>                       esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | 
> SYSCTL_CKEN);
>       }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       /*
>        * For HS400/HS400ES mode, make sure set the strobe dll in the
>        * target clock rate. So call esdhc_set_strobe_dll() after the
> @@ -1618,7 +1618,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
>       .get_cd         = fsl_esdhc_get_cd,
>       .send_cmd       = fsl_esdhc_send_cmd,
>       .set_ios        = fsl_esdhc_set_ios,
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .execute_tuning = fsl_esdhc_execute_tuning,
>  #endif
>  #if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
> diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
> index 24170c59ecc1..0685b86af464 100644
> --- a/drivers/mmc/mmc-uclass.c
> +++ b/drivers/mmc/mmc-uclass.c
> @@ -112,7 +112,7 @@ int mmc_getcd(struct mmc *mmc)
>       return dm_mmc_get_cd(mmc->dev);
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static int dm_mmc_execute_tuning(struct udevice *dev, uint opcode)
>  {
>       struct dm_mmc_ops *ops = mmc_get_ops(dev);
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 7b068c71ff37..4543d94c7205 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -329,7 +329,7 @@ int mmc_set_blocklen(struct mmc *mmc, int len)
>                                  MMC_QUIRK_RETRY_SET_BLOCKLEN, 4);
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static const u8 tuning_blk_pattern_4bit[] = {
>       0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
>       0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
> @@ -1621,7 +1621,7 @@ static inline int bus_width(uint cap)
>  }
>
>  #if !CONFIG_IS_ENABLED(DM_MMC)
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static int mmc_execute_tuning(struct mmc *mmc, uint opcode)
>  {
>       return -ENOTSUPP;
> @@ -1702,7 +1702,7 @@ void mmc_dump_capabilities(const char *text, uint caps)
>  struct mode_width_tuning {
>       enum bus_mode mode;
>       uint widths;
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       uint tuning;
>  #endif
>  };
> @@ -1743,7 +1743,7 @@ static inline int mmc_set_signal_voltage(struct mmc 
> *mmc, uint signal_voltage)
>  #if !CONFIG_IS_ENABLED(MMC_TINY)
>  static const struct mode_width_tuning sd_modes_by_pref[] = {
>  #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       {
>               .mode = UHS_SDR104,
>               .widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
> @@ -1846,7 +1846,7 @@ static int sd_select_mode_and_width(struct mmc *mmc, 
> uint card_caps)
>                               mmc_set_clock(mmc, mmc->tran_speed,
>                                               MMC_CLK_ENABLE);
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>                               /* execute tuning if needed */
>                               if (mwt->tuning && !mmc_host_is_spi(mmc)) {
>                                       err = mmc_execute_tuning(mmc,
> @@ -2224,7 +2224,7 @@ static int mmc_select_mode_and_width(struct mmc *mmc, 
> uint card_caps)
>                               mmc_select_mode(mmc, mwt->mode);
>                               mmc_set_clock(mmc, mmc->tran_speed,
>                                             MMC_CLK_ENABLE);
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>
>                               /* execute tuning if needed */
>                               if (mwt->tuning) {
> diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
> index 296aaee73318..4bd66ecf93ad 100644
> --- a/drivers/mmc/mtk-sd.c
> +++ b/drivers/mmc/mtk-sd.c
> @@ -1011,7 +1011,7 @@ static int msdc_ops_get_wp(struct udevice *dev)
>  #endif
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static u32 test_delay_bit(u32 delay, u32 bit)
>  {
>       bit %= PAD_DELAY_MAX;
> @@ -1760,7 +1760,7 @@ static const struct dm_mmc_ops msdc_ops = {
>       .set_ios = msdc_ops_set_ios,
>       .get_cd = msdc_ops_get_cd,
>       .get_wp = msdc_ops_get_wp,
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .execute_tuning = msdc_execute_tuning,
>  #endif
>       .wait_dat0 = msdc_ops_wait_dat0,
> diff --git a/drivers/mmc/octeontx_hsmmc.c b/drivers/mmc/octeontx_hsmmc.c
> index 7f9c4f4d36d4..3b5e12217325 100644
> --- a/drivers/mmc/octeontx_hsmmc.c
> +++ b/drivers/mmc/octeontx_hsmmc.c
> @@ -794,7 +794,7 @@ octeontx_mmc_get_cr_mods(struct mmc *mmc, const struct 
> mmc_cmd *cmd,
>       u8 desired_ctype = 0;
>
>       if (IS_MMC(mmc)) {
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>               if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) {
>                       if (cmd->resp_type == MMC_RSP_R1)
>                               cr.rtype_xor = 1;
> @@ -1631,7 +1631,7 @@ static int octeontx_mmc_dev_send_cmd(struct udevice 
> *dev, struct mmc_cmd *cmd,
>       return octeontx_mmc_send_cmd(dev_to_mmc(dev), cmd, data);
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static int octeontx_mmc_test_cmd(struct mmc *mmc, u32 opcode, int *statp)
>  {
>       struct mmc_cmd cmd;
> @@ -2421,12 +2421,12 @@ static int octeontx_mmc_execute_tuning(struct udevice 
> *dev, u32 opcode)
>
>       return 0;
>  }
> -#else /* MMC_SUPPORTS_TUNING */
> +#else /* CONFIG_MMC_SUPPORTS_TUNING */
>  static void octeontx_mmc_set_emm_timing(struct mmc *mmc,
>                                       union mio_emm_timing emm_timing)
>  {
>  }
> -#endif /* MMC_SUPPORTS_TUNING */
> +#endif /* CONFIG_MMC_SUPPORTS_TUNING */
>
>  /**
>   * Calculate the clock period with rounding up
> @@ -2573,7 +2573,7 @@ static int octeontx_mmc_set_ios(struct udevice *dev)
>
>       err = octeontx_mmc_configure_delay(mmc);
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       if (!err && mmc->selected_mode == MMC_HS_400 && !slot->hs400_tuned) {
>               debug("%s: Tuning HS400 mode\n", __func__);
>               err = octeontx_tune_hs400(mmc);
> @@ -3776,7 +3776,7 @@ static const struct dm_mmc_ops octeontx_hsmmc_ops = {
>       .set_ios = octeontx_mmc_set_ios,
>       .get_cd = octeontx_mmc_get_cd,
>       .get_wp = octeontx_mmc_get_wp,
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .execute_tuning = octeontx_mmc_execute_tuning,
>  #endif
>  };
> diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
> index 99f21b2c546a..118d9cd16fdb 100644
> --- a/drivers/mmc/omap_hsmmc.c
> +++ b/drivers/mmc/omap_hsmmc.c
> @@ -577,7 +577,7 @@ static uint32_t omap_hsmmc_set_capabilities(struct mmc 
> *mmc)
>       return val;
>  }
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static void omap_hsmmc_disable_tuning(struct mmc *mmc)
>  {
>       struct hsmmc *mmc_base;
> @@ -1518,7 +1518,7 @@ static const struct dm_mmc_ops omap_hsmmc_ops = {
>       .get_cd         = omap_hsmmc_getcd,
>       .get_wp         = omap_hsmmc_getwp,
>  #endif
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .execute_tuning = omap_hsmmc_execute_tuning,
>  #endif
>       .wait_dat0      = omap_hsmmc_wait_dat0,
> diff --git a/drivers/mmc/sdhci-cadence.c b/drivers/mmc/sdhci-cadence.c
> index c0a9f60b1496..0570dbca00d7 100644
> --- a/drivers/mmc/sdhci-cadence.c
> +++ b/drivers/mmc/sdhci-cadence.c
> @@ -274,7 +274,7 @@ static int sdhci_cdns_probe(struct udevice *dev)
>       host->ops = &sdhci_cdns_ops;
>       host->quirks |= SDHCI_QUIRK_WAIT_SEND_CMD;
>       sdhci_cdns_mmc_ops = sdhci_ops;
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       sdhci_cdns_mmc_ops.execute_tuning = sdhci_cdns_execute_tuning;
>  #endif
>
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index af654ea8d13c..d06f2c02bb7b 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -351,7 +351,7 @@ static int sdhci_send_command(struct mmc *mmc, struct 
> mmc_cmd *cmd,
>               return -ECOMM;
>  }
>
> -#if defined(CONFIG_DM_MMC) && defined(MMC_SUPPORTS_TUNING)
> +#if defined(CONFIG_DM_MMC) && CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>  static int sdhci_execute_tuning(struct udevice *dev, uint opcode)
>  {
>       int err;
> @@ -848,7 +848,7 @@ const struct dm_mmc_ops sdhci_ops = {
>       .set_ios        = sdhci_set_ios,
>       .get_cd         = sdhci_get_cd,
>       .deferred_probe = sdhci_deferred_probe,
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       .execute_tuning = sdhci_execute_tuning,
>  #endif
>       .wait_dat0      = sdhci_wait_dat0,
> diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h
> index bf2bc2d45c09..e6dba7071950 100644
> --- a/include/configs/mt7621.h
> +++ b/include/configs/mt7621.h
> @@ -14,9 +14,6 @@
>
>  #define CFG_SYS_INIT_SP_OFFSET               0x800000
>
> -/* MMC */
> -#define MMC_SUPPORTS_TUNING
> -
>  /* Serial SPL */
>  #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)
>  #define CFG_SYS_NS16550_CLK          50000000
> diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h
> index fca234a1dc71..6f42cd32d80f 100644
> --- a/include/configs/mt7623.h
> +++ b/include/configs/mt7623.h
> @@ -11,9 +11,6 @@
>
>  #include <linux/sizes.h>
>
> -/* MMC */
> -#define MMC_SUPPORTS_TUNING
> -
>  /* DRAM */
>  #define CFG_SYS_SDRAM_BASE           0x80000000
>
> diff --git a/include/configs/octeontx2_common.h 
> b/include/configs/octeontx2_common.h
> index c4db38562d83..f415dffddbea 100644
> --- a/include/configs/octeontx2_common.h
> +++ b/include/configs/octeontx2_common.h
> @@ -19,9 +19,4 @@
>                                       "loadaddr=20080000\0"   \
>                                       "ethrotate=yes\0"
>
> -#if defined(CONFIG_MMC_OCTEONTX)
> -#define MMC_SUPPORTS_TUNING
> -/** EMMC specific defines */
> -#endif
> -
>  #endif /* __OCTEONTX2_COMMON_H__ */
> diff --git a/include/mmc.h b/include/mmc.h
> index 4b8327f1f93b..7f1900363b91 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -18,13 +18,6 @@
>
>  struct bd_info;
>
> -#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
> -#define MMC_SUPPORTS_TUNING
> -#endif
> -#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
> -#define MMC_SUPPORTS_TUNING
> -#endif
> -
>  /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
>  #define SD_VERSION_SD        (1U << 31)
>  #define MMC_VERSION_MMC      (1U << 30)
> @@ -485,7 +478,7 @@ struct dm_mmc_ops {
>        */
>       int (*get_wp)(struct udevice *dev);
>
> -#ifdef MMC_SUPPORTS_TUNING
> +#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
>       /**
>        * execute_tuning() - Start the tuning process
>        *
> --
> 2.34.1



Reply via email to