Hi Martyn, Thank you for the patch, and for taking over this series.
On lun., mai 06, 2024 at 15:38, Martyn Welch <[email protected]> wrote: > From: Sjoerd Simons <[email protected]> > > DFU mode on a beagleplay can be used via the Type-C connector by holding > the USR switch while powering on. > > Configuration is already provided as fragments for both the A53 and R5 > u-boot parts. Include the am62x_a53_usbdfu.config config. The > am62x_r5_usbdfu.config fragment needs to be added should DFU boot be > required as this will disable booting from persistent storage due to > binary size constraints. > > Signed-off-by: Sjoerd Simons <[email protected]> > Signed-off-by: Martyn Welch <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> I've tested usb gadget on Beagle Play board using fastboot. Also tested DFU mode via snagboot. Tested-by: Mattijs Korpershoek <[email protected]> > --- > Changes in v5: > - Use existing config fragment for a53 DFU configuration > - Force usb0 into peripheral mode > > Changes in v4: > - New patch > > arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 9 +++++++++ > board/beagle/beagleplay/beagleplay.env | 1 + > configs/am62x_beagleplay_a53_defconfig | 2 ++ > 3 files changed, 12 insertions(+) > > diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi > b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi > index fb2032068d..967a2bdcd1 100644 > --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi > +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi > @@ -54,6 +54,15 @@ > >; > }; > > +&usbss0 { > + bootph-all; > +}; > + > +&usb0 { > + dr_mode = "peripheral"; > + bootph-all; > +}; > + > #ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY > > #define SPL_NODTB "spl/u-boot-spl-nodtb.bin" > diff --git a/board/beagle/beagleplay/beagleplay.env > b/board/beagle/beagleplay/beagleplay.env > index bbf6b925d0..8dbfc2f7d2 100644 > --- a/board/beagle/beagleplay/beagleplay.env > +++ b/board/beagle/beagleplay/beagleplay.env > @@ -1,5 +1,6 @@ > #include <env/ti/ti_common.env> > #include <env/ti/mmc.env> > +#include <env/ti/k3_dfu.env> > > name_kern=Image > console=ttyS2,115200n8 > diff --git a/configs/am62x_beagleplay_a53_defconfig > b/configs/am62x_beagleplay_a53_defconfig > index 4f1be1df59..ec62670d55 100644 > --- a/configs/am62x_beagleplay_a53_defconfig > +++ b/configs/am62x_beagleplay_a53_defconfig > @@ -121,3 +121,5 @@ CONFIG_EXT4_WRITE=y > CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 > CONFIG_LZO=y > CONFIG_EFI_SET_TIME=y > + > +#include <configs/am62x_a53_usbdfu.config> > -- > 2.43.0
