Add binman_imx_spl and binman_imx_fit labels to nxp-imx8mimage {} and fit {}
nodes respectively, so they can be referened in board DTs no matter how deep
in the top level binman image description they are. Update current board DTs
to use those labels.Reviewed-by: Tim Harvey <[email protected]> Signed-off-by: Marek Vasut <[email protected]> --- Cc: "NXP i.MX U-Boot Team" <[email protected]> Cc: Adam Ford <[email protected]> Cc: Alper Nebi Yasak <[email protected]> Cc: Andrejs Cainikovs <[email protected]> Cc: Angus Ainslie <[email protected]> Cc: Emanuele Ghidoli <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Francesco Dolcini <[email protected]> Cc: Marcel Ziswiler <[email protected]> Cc: Rasmus Villemoes <[email protected]> Cc: Simon Glass <[email protected]> Cc: Stefan Eichenberger <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Tim Harvey <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- V2: New patch V3: No change V4: Add RB from Tim --- arch/arm/dts/imx8mm-u-boot.dtsi | 4 +- .../dts/imx8mm-verdin-wifi-dev-u-boot.dtsi | 8 +- arch/arm/dts/imx8mn-u-boot.dtsi | 4 +- arch/arm/dts/imx8mp-dhcom-u-boot.dtsi | 124 +++++++++--------- arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi | 26 ++-- arch/arm/dts/imx8mp-u-boot.dtsi | 4 +- arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi | 10 +- arch/arm/dts/imx8mq-u-boot.dtsi | 4 +- 8 files changed, 84 insertions(+), 100 deletions(-) diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi index 6ab8f66256e..b9b1193823a 100644 --- a/arch/arm/dts/imx8mm-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-u-boot.dtsi @@ -54,7 +54,7 @@ }; #endif - nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <1>; @@ -98,7 +98,7 @@ }; }; - fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; diff --git a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi index 90183aff8bc..183de46f66a 100644 --- a/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-verdin-wifi-dev-u-boot.dtsi @@ -35,12 +35,8 @@ bootph-pre-ram; }; -&binman { - section { - fit { - offset = <0x5fc00>; - }; - }; +&binman_imx_fit { + offset = <0x5fc00>; }; &gpio1 { diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi index ba9967dbe4a..c9fb33cfb73 100644 --- a/arch/arm/dts/imx8mn-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-u-boot.dtsi @@ -103,7 +103,7 @@ }; #endif - nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <2>; @@ -169,7 +169,7 @@ }; }; - fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi index cb37e28f28f..c065fb82994 100644 --- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi @@ -135,73 +135,69 @@ bootph-pre-ram; }; -&binman { - section { - fit { - images { - fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast { - description = "imx8mp-dhcom-som-overlay-eth1xfast"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast { - description = "imx8mp-dhcom-som-overlay-eth2xfast"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast { - description = "imx8mp-dhcom-pdk-overlay-eth2xfast"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-som-overlay-rev100 { - description = "imx8mp-dhcom-som-overlay-rev100"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-som-overlay-rev100.dtbo"; - }; - }; - - fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 { - description = "imx8mp-dhcom-pdk3-overlay-rev100"; - type = "flat_dt"; - compression = "none"; - - blob-ext { - filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo"; - }; - }; +&binman_imx_fit { + images { + fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast { + description = "imx8mp-dhcom-som-overlay-eth1xfast"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-som-overlay-eth1xfast.dtbo"; }; + }; + + fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast { + description = "imx8mp-dhcom-som-overlay-eth2xfast"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-som-overlay-eth2xfast.dtbo"; + }; + }; + + fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast { + description = "imx8mp-dhcom-pdk-overlay-eth2xfast"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo"; + }; + }; - configurations { - default = "@config-DEFAULT-SEQ"; - - @config-SEQ { - fdt = "fdt-1", - "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast", - "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast", - "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast", - "fdt-dto-imx8mp-dhcom-som-overlay-rev100", - "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100"; - }; + fdt-dto-imx8mp-dhcom-som-overlay-rev100 { + description = "imx8mp-dhcom-som-overlay-rev100"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-som-overlay-rev100.dtbo"; + }; + }; + + fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100 { + description = "imx8mp-dhcom-pdk3-overlay-rev100"; + type = "flat_dt"; + compression = "none"; + + blob-ext { + filename = "imx8mp-dhcom-pdk3-overlay-rev100.dtbo"; }; }; }; + + configurations { + default = "@config-DEFAULT-SEQ"; + + @config-SEQ { + fdt = "fdt-1", + "fdt-dto-imx8mp-dhcom-som-overlay-eth1xfast", + "fdt-dto-imx8mp-dhcom-som-overlay-eth2xfast", + "fdt-dto-imx8mp-dhcom-pdk-overlay-eth2xfast", + "fdt-dto-imx8mp-dhcom-som-overlay-rev100", + "fdt-dto-imx8mp-dhcom-pdk3-overlay-rev100"; + }; + }; }; diff --git a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi index aff5dcf615d..21eff6d6ad4 100644 --- a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi @@ -135,21 +135,17 @@ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_400M>; }; -&binman { - section { - fit { - images { - fip { - description = "Trusted Firmware FIP"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - load = <0x40310000>; - - fip_blob: blob-ext{ - filename = "fip.bin"; - }; - }; +&binman_imx_fit { + images { + fip { + description = "Trusted Firmware FIP"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <0x40310000>; + + fip_blob: blob-ext{ + filename = "fip.bin"; }; }; }; diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index c4c1a177102..8b5ac3faf1c 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -86,7 +86,7 @@ section { pad-byte = <0x00>; - nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <2>; @@ -129,7 +129,7 @@ }; }; - fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; diff --git a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi index 1a4568dac65..98da015a444 100644 --- a/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-librem5-r4-u-boot.dtsi @@ -10,14 +10,10 @@ bootph-pre-ram; }; -&binman { +&binman_imx_spl { section { - nxp-imx8mimage { - section { - signed-hdmi-imx8m { - filename = "signed_dp_imx8m.bin"; - }; - }; + signed-hdmi-imx8m { + filename = "signed_dp_imx8m.bin"; }; }; }; diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi index 48dbe94f0c4..72da674d245 100644 --- a/arch/arm/dts/imx8mq-u-boot.dtsi +++ b/arch/arm/dts/imx8mq-u-boot.dtsi @@ -38,7 +38,7 @@ section { pad-byte = <0x00>; - nxp-imx8mimage { + binman_imx_spl: nxp-imx8mimage { filename = "u-boot-spl-mkimage.bin"; nxp,boot-from = "sd"; nxp,rom-version = <1>; @@ -87,7 +87,7 @@ }; }; - fit { + binman_imx_fit: fit { description = "Configuration to load ATF before U-Boot"; #ifndef CONFIG_IMX_HAB fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; -- 2.43.0
