Tabi Timur-B04825 wrote:
> May I see it?
Please see attached file.
Dave
/*
*
* Copyright 2005, 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Modified for MIP470
*
*/
/dts-v1/;
/ {
model = "MIP470-1";
compatible = "MIP470";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8347@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <0x20>; // 32 bytes
i-cache-line-size = <0x20>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0x0>; // from bootloader
bus-frequency = <0x0>; // from bootloader
clock-frequency = <0x0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; // 512MB at 0
};
soc8347@ff400000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x00000000 0xff400000 0x00100000>;
reg = <0xff400000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel",
"fsl,elo-dma-channel";
reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel",
"fsl,elo-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel",
"fsl,elo-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel",
"fsl,elo-dma-channel";
reg = <0x180 0x28>;
cell-index = <3>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
usb@22000 {
compatible = "fsl-usb2-mph";
reg = <0x22000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <39 0x8>;
phy_type = "ulpi";
port1;
};
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
};
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; // from
bootloader
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
phy-handle = <&phy1>;
linux,network-index = <0>;
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; // from
bootloader
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
phy-handle = <&phy2>;
linux,network-index = <1>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
device_type = "ipic";
};
};
pci0: pci@ff408500 {
cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0xa000 0x0 0x0 0x1 &ipic 48 0x8
0xa800 0x0 0x0 0x1 &ipic 17 0x8
0xa800 0x0 0x0 0x2 &ipic 18 0x8
0xa800 0x0 0x0 0x3 &ipic 19 0x8
0xa800 0x0 0x0 0x4 &ipic 20 0x8
0xb000 0x0 0x0 0x1 &ipic 18 0x8
0xb000 0x0 0x0 0x2 &ipic 19 0x8
0xb000 0x0 0x0 0x3 &ipic 20 0x8
0xb000 0x0 0x0 0x4 &ipic 17 0x8
0xb800 0x0 0x0 0x1 &ipic 19 0x8
0xb800 0x0 0x0 0x2 &ipic 20 0x8
0xb800 0x0 0x0 0x3 &ipic 17 0x8
0xb800 0x0 0x0 0x4 &ipic 18 0x8
0xc000 0x0 0x0 0x1 &ipic 20 0x8
0xc000 0x0 0x0 0x2 &ipic 17 0x8
0xc000 0x0 0x0 0x3 &ipic 18 0x8
0xc000 0x0 0x0 0x4 &ipic 19 0x8>;
interrupt-parent = <&ipic>;
interrupts = <66 0x8>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x10000000
0x42000000 0x0 0xc0000000 0xc0000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0000000 0x0 0x00100000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xff408500 0x100
0xff408300 0x8>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
localbus@80000000 {
#address-cells = <2>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "localbus";
compatible = "simple-bus";
reg = <0x80000000 0x1000>;
ranges = <0 0x0 0x80000000 0x04000000
3 0x0 0x90000000 0x00400000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0 0x0 0x04000000>;
bank-width = <2>;
device-width = <1>;
};
serial2: serial@3,0x10 {
device_type = "serial";
compatible = "ns16550";
reg = <3 0x10 0x10>;
clock-frequency = <14745600>;
interrupts = <21 0x8>;
interrupt-parent = <&ipic>;
};
serial3: serial@3,0x20 {
device_type = "serial";
compatible = "ns16550";
reg = <3 0x20 0x10>;
clock-frequency = <14745600>;
interrupts = <22 0x8>;
interrupt-parent = <&ipic>;
};
};
};
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
