[PATCH 03/11] board: cm-t43: convert to DM_I2C

[Anatolij Gustschin]

Conversion to DM_I2C is mandatory, enable DM_I2C
to disable board removal warning.

Signed-off-by: Anatolij Gustschin <ag...@denx.de>
---
Cc: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tom Rini <tr...@konsulko.com>
---
 board/compulab/cm_t43/cm_t43.c | 2 --
 configs/cm_t43_defconfig       | 3 ++-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c
index 181581926c..983991ea46 100644
--- a/board/compulab/cm_t43/cm_t43.c
+++ b/board/compulab/cm_t43/cm_t43.c
@@ -48,8 +48,6 @@ int board_init(void)
        gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
        gpmc_init();
        set_i2c_pin_mux();
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-       i2c_probe(TPS65218_CHIP_PM);
 
        return 0;
 }
diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig
index 32f126a517..1c9ae335e9 100644
--- a/configs/cm_t43_defconfig
+++ b/configs/cm_t43_defconfig
@@ -38,6 +38,7 @@ CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_MTD=y
 # CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_NAND_DRIVERS=y
@@ -72,7 +73,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOOTP_SEND_HOSTNAME=y
 CONFIG_SYS_RX_ETH_BUFFER=64
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_HSMMC2_8BIT=y
-- 
2.25.1