On 9/12/24 8:06 AM, Lothar Rubusch wrote:
Introduce device-tree files for Enclustra Intel AA1 SoMs and related
support.
- Mercury AA1
The setup depends on a selected boot mode. Various fragments for SD/MMC
and QSPI flash boot are provided.
In combination, the following Enclustra carrier boards are supported:
- ST1
- PE1
- PE3
Signed-off-by: Andreas Buerkler <andreas.buerk...@enclustra.com>
Signed-off-by: Lothar Rubusch <l.rubu...@gmail.com>
---
arch/arm/dts/ME-AA1-270-2I2-D11E-NFX3.dtsi | 14 +
arch/arm/dts/ME-AA1-270-3E4-D11E-NFX3.dtsi | 14 +
arch/arm/dts/ME-AA1-480-2I3-D12E-NFX3.dtsi | 15 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/enclustra-aa1.dts | 32 ++
.../dts/socfpga_arria10_mercury_aa1_handoff.h | 307 ++++++++++++++++++
.../dts/socfpga_enclustra_mercury_aa1.dtsi | 179 ++++++++++
...cfpga_enclustra_mercury_aa1_qspi_boot.dtsi | 18 +
...fpga_enclustra_mercury_aa1_sdmmc_boot.dtsi | 18 +
.../dts/socfpga_enclustra_mercury_pe1.dtsi | 7 +
.../dts/socfpga_enclustra_mercury_pe3.dtsi | 8 +
.../dts/socfpga_enclustra_mercury_st1.dtsi | 8 +
Is there any chance to upstream these DTs to Linux first , and then let
them all trickle into U-Boot through dts/upstream/ ?
