Hi Simon,
On Wed, 25 Sept 2024 at 15:48, Simon Glass <s...@chromium.org> wrote:
>
> Hi Ilias,
>
> On Mon, 23 Sept 2024 at 11:49, Ilias Apalodimas
> <ilias.apalodi...@linaro.org> wrote:
> >
> > Hi Simon,
> >
> > On Fri, 20 Sept 2024 at 10:25, Simon Glass <s...@chromium.org> wrote:
> > >
> > > Separate BSS is current mandatory on armv8 but this is not useful for
> > > early boot phases. Add support for the combined BSS.
> > >
> > > Use an #ifdef to avoid using CONFIG_SPL_BSS_START_ADDR which is not
> > > valid in this case.
> > >
> > > Signed-off-by: Simon Glass <s...@chromium.org>
> > > ---
> > >
> > > (no changes since v1)
> > >
> > > arch/arm/cpu/armv8/u-boot-spl.lds | 12 ++++++++++++
> > > 1 file changed, 12 insertions(+)
> > >
> > > diff --git a/arch/arm/cpu/armv8/u-boot-spl.lds
> > > b/arch/arm/cpu/armv8/u-boot-spl.lds
> > > index 215cedd69a8..fed69644b55 100644
> > > --- a/arch/arm/cpu/armv8/u-boot-spl.lds
> > > +++ b/arch/arm/cpu/armv8/u-boot-spl.lds
> > > @@ -13,8 +13,10 @@
> > >
> > > MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,
> > > LENGTH = IMAGE_MAX_SIZE }
> > > +#ifdef CONFIG_SPL_SEPARATE_BSS
> > > MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
> > > LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
> > > +#endif
> > >
> > > OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64",
> > > "elf64-littleaarch64")
> > > OUTPUT_ARCH(aarch64)
> > > @@ -56,12 +58,22 @@ SECTIONS
> > > _end = .;
> > > _image_binary_end = .;
> > >
> > > +#ifdef CONFIG_SPL_SEPARATE_BSS
> > > .bss : {
> > > __bss_start = .;
> > > *(.bss*)
> > > . = ALIGN(8);
> > > __bss_end = .;
> > > } >.sdram
> > > +#else
> > > + .bss (NOLOAD) : {
> > > + __bss_start = .;
> > > + *(.bss*)
> > > + . = ALIGN(8);
> > > + __bss_end = .;
> > > + } >.sram
> > > +#endif
> >
> > This is still going to be separate. The only difference isn't that
> > it's not loaded. If you want to combine it with a region, you got to
> > do something similar to what we have in armv7, where it overlaps with
> > rel.dyn
>
> I don't mind about combining it with a region, But SPL doesn't have
> relocation data, right?
>
> My meaning of 'separate' is as described in CONFIG_SPL_SEPARATE_BSS,
> i.e. being kept in SDRAM.
Ok, is the NOLOAD really needed? I would prefer the ifdef around .sdram/.sram
In any case
Reviewed-by: Ilias Apalodimas <ilias.apalodi...@linaro.org>
>
> >
> > Thanks
> > /Ilias
> > > + __bss_size = __bss_end - __bss_start;
> > >
> > > /DISCARD/ : { *(.rela*) }
> > > /DISCARD/ : { *(.dynsym) }
> > > --
> > > 2.43.0
> > >
>
> Regards,
> Simon
