On 10/13/24 6:35 PM, Neil Armstrong wrote:
Hi,

Le 12/10/2024 à 05:37, Marek Vasut a écrit :
On 10/11/24 4:38 PM, Neil Armstrong wrote:
The current flush operation will omit doing a flush/invalidate on
the first and last bytes if the base address and size are not aligned
with CACHELINE_SIZE.

This causes operation failures Qualcomm platforms.

Take in account the alignment and size of the buffer and also
flush the previous and last cacheline.

Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
  drivers/usb/dwc3/io.h | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index 04791d4c9be..0ede323671b 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -50,6 +50,9 @@ static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
  static inline void dwc3_flush_cache(uintptr_t addr, int length)
  {
-    flush_dcache_range(addr, addr + ROUND(length, CACHELINE_SIZE));
+    uintptr_t start_addr = (uintptr_t)addr & ~(CACHELINE_SIZE - 1);
+    uintptr_t end_addr = ALIGN((uintptr_t)addr + length, CACHELINE_SIZE);
+
+    flush_dcache_range((unsigned long)start_addr, (unsigned long)end_addr);
  }
  #endif /* __DRIVERS_USB_DWC3_IO_H */

You likely want a max(CONFIG_SYS_CACHELINE_SIZE, dwc3-buffer- alignment-requirement) to really correctly align the buffer.

No this change is related to the system cacheline to properly flush/ invalidate the data to the system memory, the dwc3 buffer alignment (if there's one) should be handled
when allocating the memory, but here we're using dma_alloc_coherent() which
use DMA_MINALIGN.

OK

Reviewed-by: Marek Vasut <ma...@denx.de>

Reply via email to