From: Maksim Kiselev <[email protected]>

Add support for VBUS supply regulator.

When our type-c port acts as a host(SRC), this regulator
used for control VBUS supply.

Signed-off-by: Maksim Kiselev <[email protected]>
---
 drivers/usb/tcpm/fusb302.c | 44 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/tcpm/fusb302.c b/drivers/usb/tcpm/fusb302.c
index ee283782792..2a258d6429b 100644
--- a/drivers/usb/tcpm/fusb302.c
+++ b/drivers/usb/tcpm/fusb302.c
@@ -10,6 +10,7 @@
 #include <asm/gpio.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <power/regulator.h>
 #include <dm/device_compat.h>
 #include <usb/tcpm.h>
 #include "fusb302_reg.h"
@@ -50,10 +51,13 @@ struct fusb302_chip {
 
        /* port status */
        bool vconn_on;
+       bool vbus_on;
        bool vbus_present;
        enum typec_cc_polarity cc_polarity;
        enum typec_cc_status cc1;
        enum typec_cc_status cc2;
+
+       struct udevice *vbus;
 };
 
 static int fusb302_i2c_write(struct udevice *dev, u8 address, u8 data)
@@ -506,7 +510,28 @@ done:
 
 static int fusb302_set_vbus(struct udevice *dev, bool on, bool charge)
 {
-       return 0;
+       struct fusb302_chip *chip = dev_get_priv(dev);
+       int ret = 0;
+
+       if (chip->vbus_on == on) {
+               dev_dbg(dev, "vbus is already %s\n", on ? "On" : "Off");
+       } else {
+               if (CONFIG_IS_ENABLED(DM_REGULATOR) && chip->vbus) {
+                       if (on)
+                               ret = regulator_set_enable(chip->vbus, true);
+                       else
+                               ret = regulator_set_enable(chip->vbus, false);
+                       if (ret < 0) {
+                               dev_dbg(dev, "cannot %s vbus regulator, 
ret=%d\n",
+                                       on ? "enable" : "disable", ret);
+                               return ret;
+                       }
+               }
+               chip->vbus_on = on;
+               dev_dbg(dev, "vbus := %s\n", on ? "On" : "Off");
+       }
+
+       return ret;
 }
 
 static int fusb302_pd_tx_flush(struct udevice *dev)
@@ -1293,6 +1318,22 @@ static int fusb302_get_connector_node(struct udevice 
*dev, ofnode *connector_nod
        return 0;
 }
 
+static int fusb302_probe(struct udevice *dev)
+{
+       struct fusb302_chip *chip = dev_get_priv(dev);
+       int ret;
+
+       if (CONFIG_IS_ENABLED(DM_REGULATOR)) {
+               ret = device_get_supply_regulator(dev, "vbus-supply", 
&chip->vbus);
+               if (ret && ret != -ENOENT) {
+                       dev_err(dev, "Failed to get vbus-supply regulator\n");
+                       return ret;
+               }
+       }
+
+       return 0;
+}
+
 static struct dm_tcpm_ops fusb302_ops = {
        .get_connector_node = fusb302_get_connector_node,
        .init = fusb302_init,
@@ -1320,4 +1361,5 @@ U_BOOT_DRIVER(fusb302) = {
        .of_match = fusb302_ids,
        .ops = &fusb302_ops,
        .priv_auto = sizeof(struct fusb302_chip),
+       .probe = fusb302_probe,
 };
-- 
2.45.2

Reply via email to