On Fri, 2024-11-08 at 06:21 +0100, Heiko Schocher wrote: > make savedefconfig and add SCU_WDT and fix environment > offsets, as since silicium c0 the boot container takes place > at offset 0 and so the u-boot-env must be moved outside of > the boot container area. > > Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]> > --- > > configs/capricorn_cxg3_defconfig | 16 +++++++++++----- > 1 file changed, 11 insertions(+), 5 deletions(-) > > diff --git a/configs/capricorn_cxg3_defconfig > b/configs/capricorn_cxg3_defconfig > index ce820e2c54f..4b92dc1f943 100644 > --- a/configs/capricorn_cxg3_defconfig > +++ b/configs/capricorn_cxg3_defconfig > @@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=3 > CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y > CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 > CONFIG_ENV_SIZE=0x2000 > -CONFIG_ENV_OFFSET=0x0 > +CONFIG_ENV_OFFSET=0x200000 > CONFIG_DM_GPIO=y > CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3" > CONFIG_SPL_TEXT_BASE=0x100000 > @@ -25,7 +25,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000 > CONFIG_SYS_BOOTM_LEN=0x800000 > CONFIG_SYS_LOAD_ADDR=0x80280000 > CONFIG_SPL=y > -CONFIG_ENV_OFFSET_REDUND=0x2000 > +CONFIG_ENV_OFFSET_REDUND=0x202000 > CONFIG_IDENT_STRING=" ##v01.06" > CONFIG_REMAKE_ELF=y > # CONFIG_EFI_LOADER is not set > @@ -55,9 +55,10 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y > CONFIG_SPL_SYS_MALLOC=y > CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y > CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 > -CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 > +CONFIG_SPL_SYS_MALLOC_SIZE=0x4000 > CONFIG_SPL_SYS_MMCSD_RAW_MODE=y > -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y > +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 > CONFIG_SPL_POWER_DOMAIN=y > CONFIG_SPL_WATCHDOG=y > CONFIG_HUSH_PARSER=y > @@ -112,10 +113,13 @@ CONFIG_PHYLIB=y > CONFIG_MV88E61XX_SWITCH=y > CONFIG_MV88E61XX_CPU_PORT=5 > CONFIG_MV88E61XX_PHY_PORTS=0x7 > +CONFIG_DM_ETH_PHY=y > CONFIG_FEC_MXC_SHARE_MDIO=y > CONFIG_FEC_MXC_MDIO_BASE=0x5B050000 > CONFIG_FEC_MXC=y > CONFIG_MII=y > +CONFIG_PHY=y > +CONFIG_NOP_PHY=y > CONFIG_PINCTRL=y > CONFIG_SPL_PINCTRL=y > CONFIG_PINCTRL_IMX8=y > @@ -129,5 +133,7 @@ CONFIG_DM_SERIAL=y > CONFIG_FSL_LPUART=y > CONFIG_DM_THERMAL=y > CONFIG_IMX_SCU_THERMAL=y > -# CONFIG_SPL_WDT is not set > +# CONFIG_WATCHDOG is not set > +CONFIG_WDT=y > +CONFIG_WDT_IMX_SCU=y > CONFIG_SPL_TINY_MEMSET=y -- Alexander Sverdlin Siemens AG www.siemens.com
