Hi Aniket, On 12:45-20241116, Aniket Limaye wrote: > From: Reid Tonking <[email protected]> > > Define new CONFIG_K3_OPP_LOW under arm/mach-k3/Kconfig and add default > value to j7200_evm_r5_defconfig > > Signed-off-by: Reid Tonking <[email protected]> > Signed-off-by: Aniket Limaye <[email protected]> > > --- > v3: > - Add Kconfig dependency on K3_AVS0 > - Update commit msg to make it more clear > - Link to v2: > https://lore.kernel.org/u-boot/[email protected]/ > > Signed-off-by: Aniket Limaye <[email protected]> > --- > arch/arm/mach-k3/Kconfig | 7 +++++++
Should this be in mach-k3/r5/Kconfig? > configs/j7200_evm_r5_defconfig | 1 + > 2 files changed, 8 insertions(+) > > diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig > index f3f42b39213..c73396bfbf3 100644 > --- a/arch/arm/mach-k3/Kconfig > +++ b/arch/arm/mach-k3/Kconfig > @@ -103,6 +103,13 @@ config SYS_K3_BOOT_CORE_ID > int > default 16 > > +config K3_OPP_LOW > + depends on ARCH_K3 && K3_AVS0 > + bool "Enable OPP_LOW on supported TI K3 SoCs" > + help > + Enabling this will allow Socs with the proper efuse to run at a lower > + MPU core voltage and adjust frequency according to SoC trm nit: s/trm/TRM > + > config K3_EARLY_CONS > bool "Activate to allow for an early console during SPL" > depends on SPL > diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig > index f036a6fd46b..217759e5d1b 100644 > --- a/configs/j7200_evm_r5_defconfig > +++ b/configs/j7200_evm_r5_defconfig > @@ -102,6 +102,7 @@ CONFIG_K3_SEC_PROXY=y > CONFIG_FS_LOADER=y > CONFIG_SPL_FS_LOADER=y > CONFIG_K3_AVS0=y > +# CONFIG_K3_OPP_LOW is not set > CONFIG_SUPPORT_EMMC_BOOT=y > CONFIG_SPL_MMC_HS400_SUPPORT=y > CONFIG_MMC_SDHCI=y > -- > 2.47.0 >
