probing on capricorn board (imx8qxp based) brings: Can't find FEC0 clk rate: -19
Cause is that when probing fec_mxc driver, fec_mii_setspeed() is called which calls fec_get_clk_rate(). fec_mii_setspeed() calls fec_get_clk_rate with NULL pointer for udev and so as in IMX8QXP case CLK_CCF is enabled udev gets searched with: uclass_get_device_by_seq(UCLASS_ETH, idx, &dev); but we do not have yet a UCLASS_ETH ! as we just probing it! Prevent this by passing udev to fec_get_clk_rate() Signed-off-by: Heiko Schocher <[email protected]> --- (no changes since v1) board/boundary/nitrogen6x/nitrogen6x.c | 2 +- board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +- drivers/net/fec_mxc.c | 14 +++++++------- include/netdev.h | 2 +- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index b85fd806cba..1adee9a461f 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -281,7 +281,7 @@ int board_eth_init(struct bd_info *bis) setup_iomux_enet(); #ifdef CONFIG_FEC_MXC - bus = fec_get_miibus(base, -1); + bus = fec_get_miibus(NULL, base, -1); if (!bus) return -EINVAL; /* scan phy 4,5,6,7 */ diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index e9269ef5353..b543bf8c1fb 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -385,7 +385,7 @@ static int find_ethernet_phy(void) int phy_addr = -ENOENT; #ifdef CONFIG_FEC_MXC - bus = fec_get_miibus(ENET_BASE_ADDR, -1); + bus = fec_get_miibus(NULL, ENET_BASE_ADDR, -1); if (!bus) return -ENOENT; diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index d6d5cb52fdd..eca681b16d1 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -160,7 +160,7 @@ static int fec_get_clk_rate(void *udev, int idx) } } -static void fec_mii_setspeed(struct ethernet_regs *eth) +static void fec_mii_setspeed(struct udevice *dev, struct ethernet_regs *eth) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock @@ -182,7 +182,7 @@ static void fec_mii_setspeed(struct ethernet_regs *eth) u32 hold; int ret; - ret = fec_get_clk_rate(NULL, 0); + ret = fec_get_clk_rate(dev, 0); if (ret < 0) { printf("Can't find FEC0 clk rate: %d\n", ret); return; @@ -581,7 +581,7 @@ static int fecmxc_init(struct udevice *dev) fec_reg_setup(fec); if (fec->xcv_type != SEVENWIRE) - fec_mii_setspeed(fec->bus->priv); + fec_mii_setspeed(dev, fec->bus->priv); /* Set Opcode/Pause Duration Register */ writel(0x00010020, &fec->eth->op_pause); /* FIXME 0xffff0020; */ @@ -996,7 +996,7 @@ static void fec_free_descs(struct fec_priv *fec) free(fec->tbd_base); } -struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id) +struct mii_dev *fec_get_miibus(struct udevice *dev, ulong base_addr, int dev_id) { struct ethernet_regs *eth = (struct ethernet_regs *)base_addr; struct mii_dev *bus; @@ -1018,7 +1018,7 @@ struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id) free(bus); return NULL; } - fec_mii_setspeed(eth); + fec_mii_setspeed(dev, eth); return bus; } @@ -1354,10 +1354,10 @@ static int fecmxc_probe(struct udevice *dev) if (!bus) { dm_mii_bus = false; #ifdef CONFIG_FEC_MXC_MDIO_BASE - bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE, + bus = fec_get_miibus(dev, (ulong)CONFIG_FEC_MXC_MDIO_BASE, dev_seq(dev)); #else - bus = fec_get_miibus((ulong)priv->eth, dev_seq(dev)); + bus = fec_get_miibus(dev, (ulong)priv->eth, dev_seq(dev)); #endif } if (!bus) { diff --git a/include/netdev.h b/include/netdev.h index 2a06d9a261b..949245ecdec 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -117,7 +117,7 @@ static inline int pci_eth_init(struct bd_info *bis) return num; } -struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id); +struct mii_dev *fec_get_miibus(struct udevice *dev, ulong base_addr, int dev_id); #ifdef CONFIG_PHYLIB struct phy_device; -- 2.20.1
