On Sat, Nov 23, 2024 at 1:53 PM Heiko Schocher <[email protected]> wrote: > > Updating the imx8qxp based siemens board. The current > state of the siemens imx8qxp board is in an old not > really working state. > > This series brings mainline back working on the siemens > deneb board, the guedi board is dropped as not longer used. > > make all runs fine without having all the needed firmware images > on board, and so CI @azure. > > If you want to have a working image you need to copy the > following images to your build directory $BDIR: > > ATF : bl31-imx8dx.bin -> $BDIR/bl31.bin > AHAB: mx8qxc0-ahab-container.img -> $BDIR/mx8qxc0-ahab-container.img > SCFW: deneb-scfw-tcm.bin -> $BDIR/mx8qx-mek-scfw-tcm.bin > > and call make flash.bin > > There are also updates for ethernet and USB support, but not > ready to push upstream currently, hopefully following soon. > > Azure build: > https://dev.azure.com/hs0298/hs/_build/results?buildId=139&view=results > > series is based on mainline commit: > 7fe55182d92 ("Merge tag 'xilinx-for-v2025.01-rc3-v2' of > https://source.denx.de/u-boot/custodians/u-boot-microblaze";) > > Ah yes, not to forget, we work at siemens also on a CI setup to > have a mainline nightly build and test on hardware. We already > have such a CI for internall U-Boot versions up and running, but > we do not want again loose sync with mainline.
Applied all for -next, thanks.
