The DRAM configuration GPIO straps must be accessible in all boot phases
because the GPIOs are sampled both in U-Boot SPL as well as early on in
U-Boot proper. The already present bootph-pre-ram DT property made the
GPIO controllers available in SPL, but not early on in U-Boot proper,
which made gpio_request_list_by_name_nodev() in board dmo_get_memcfg()
fail. Add missing bootph-all DT property to all GPIO controllers which
are referenced in dmo,ram-coding-gpios DT property to make those GPIO
controllers available early in U-Boot proper as well.
Fixes: 8c103c33fb14 ("dm: dts: Convert driver model tags to use new schema")
Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-...@nxp.com>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Quentin Schulz <quentin.sch...@cherry.de>
Cc: Sean Anderson <sean...@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Stefano Babic <sba...@denx.de>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-boot@lists.denx.de
---
NOTE: For v2025.01
---
arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi | 1 +
arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
index a235e088fa4..babe51ebdc1 100644
--- a/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
@@ -77,6 +77,7 @@
&gpio2 {
bootph-pre-ram;
+ bootph-all;
dsi-reset-hog {
bootph-pre-ram;
diff --git a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
index 805b5f57955..f2779ff14a0 100644
--- a/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-data-modul-edm-sbc-u-boot.dtsi
@@ -64,6 +64,7 @@
&gpio3 {
bootph-pre-ram;
+ bootph-all;
bl-enable-hog {
bootph-pre-ram;
@@ -92,6 +93,7 @@
&gpio4 {
bootph-pre-ram;
+ bootph-all;
dsi-reset-hog {
bootph-pre-ram;
--
2.45.2
