The current A/B switching preparatory altbootcmd is confusing to users, replace it with plain 'run bootcmd' which can be replaced by proper A/B switching altbootcmd when the matching updater is added on top of the platform. By default, keep the boot counter incrementing, but do not do any A/B partition switching.
Signed-off-by: Marek Vasut <[email protected]> --- Cc: "NXP i.MX U-Boot Team" <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Quentin Schulz <[email protected]> Cc: Sean Anderson <[email protected]> Cc: Simon Glass <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] --- NOTE: For v2025.01 --- V2: No change --- include/configs/imx8mm_data_modul_edm_sbc.h | 2 +- include/configs/imx8mp_data_modul_edm_sbc.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index d323f84ac7a..57ecb5e2190 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -34,7 +34,7 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_EXTRA_ENV_SETTINGS \ - "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \ + "altbootcmd=run bootcmd\0" \ "bootlimit=3\0" \ "devtype=mmc\0" \ "devpart=1\0" \ diff --git a/include/configs/imx8mp_data_modul_edm_sbc.h b/include/configs/imx8mp_data_modul_edm_sbc.h index f953847ce05..de5bdd30e18 100644 --- a/include/configs/imx8mp_data_modul_edm_sbc.h +++ b/include/configs/imx8mp_data_modul_edm_sbc.h @@ -24,7 +24,7 @@ #define FEC_QUIRK_ENET_MAC #define CFG_EXTRA_ENV_SETTINGS \ - "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \ + "altbootcmd=run bootcmd\0" \ "bootlimit=3\0" \ "devtype=mmc\0" \ "devpart=1\0" \ -- 2.45.2
