Hi Sughosh, > Can you show the output of bdinfo. And also print the value of ram_top > while booting the board. >
Below are ram_top and bdinfo: U-Boot 2025.01-rc4-00025-g4ff8ecd9b14e-dirty (Dec 16 2024 - 11:21:18 -0300) CPU: Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz) CPU: Industrial temperature grade (-40C to 105C) at 51C Reset cause: POR DRAM: Ram top: FFFFFFFF 8 GiB ... Verdin iMX8MP # bdinfo boot_params = 0x0000000000000000 DRAM bank = 0x0000000000000000 -> start = 0x0000000040000000 -> size = 0x00000000c0000000 DRAM bank = 0x0000000000000001 -> start = 0x0000000100000000 -> size = 0x0000000140000000 flashstart = 0x0000000000000000 flashsize = 0x0000000000000000 flashoffset = 0x0000000000000000 baudrate = 115200 bps relocaddr = 0x00000000ffece000 reloc off = 0x00000000bfcce000 Build = 64-bit current eth = ethernet@30bf0000 ethaddr = 6e:79:12:b6:72:24 IP addr = <NULL> fdt_blob = 0x00000000ffab8450 lmb_dump_all: memory.count = 0x1 memory[0] [0x40000000-0x23fffffff], 0x200000000 bytes, flags: none reserved.count = 0x1 reserved[0] [0xffffffff-0x23fffffff], 0x140000001 bytes, flags: no-overwrite devicetree = separate arch_number = 0x0000000000000000 TLB addr = 0x00000000fffd0000 irq_sp = 0x00000000ffab8440 sp start = 0x00000000ffab8440 Early malloc usage: d620 / 10000 Best Regards, João Paulo Gonçalves
