The flash_writer tool and previous recovery tools require the SREC load address to be 0x5000_0000 . The PIE U-Boot build sets the address to 0x0 instead, so override the address back to make u-boot-elf.srec compatible with the recovery tools.
Tested-by: Niklas Söderlund <[email protected]> Signed-off-by: Marek Vasut <[email protected]> --- Cc: Niklas Söderlund <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Cc: Tom Rini <[email protected]> Cc: [email protected] --- Makefile | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Makefile b/Makefile index 0500eb6e0a7..c7318950f33 100644 --- a/Makefile +++ b/Makefile @@ -1286,6 +1286,15 @@ u-boot.hex u-boot.srec: u-boot FORCE OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec) +ifeq ($(CONFIG_POSITION_INDEPENDENT)$(CONFIG_RCAR_GEN3),yy) +# The flash_writer tool and previous recovery tools +# require the SREC load address to be 0x5000_0000 . +# The PIE U-Boot build sets the address to 0x0, so +# override the address back to make u-boot-elf.srec +# compatible with the recovery tools. +OBJCOPYFLAGS_u-boot-elf.srec += --change-addresses=0x50000000 +endif + u-boot-elf.srec: u-boot.elf FORCE $(call if_changed,objcopy) -- 2.45.2
