All VBE methods read non-volatile data, so move this function into a
common file.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Split patch into several pieces
boot/vbe_common.c | 41 +++++++++++++++++++++++++++++++++++++++++
boot/vbe_common.h | 16 ++++++++++++++++
boot/vbe_simple.c | 44 ++++++++------------------------------------
3 files changed, 65 insertions(+), 36 deletions(-)
diff --git a/boot/vbe_common.c b/boot/vbe_common.c
index 8bbcc37e67e..672878fe6fe 100644
--- a/boot/vbe_common.c
+++ b/boot/vbe_common.c
@@ -9,6 +9,7 @@
#include <blk.h>
#include <memalign.h>
#include <spl.h>
+#include <u-boot/crc.h>
#include "vbe_common.h"
int vbe_get_blk(const char *storage, struct udevice **blkp)
@@ -59,3 +60,43 @@ int vbe_read_version(struct udevice *blk, ulong offset, char
*version,
return 0;
}
+
+int vbe_read_nvdata(struct udevice *blk, ulong offset, ulong size, u8 *buf)
+{
+ uint hdr_ver, hdr_size, data_size, crc;
+ const struct vbe_nvdata *nvd;
+
+ /* we can use an assert() here since we already read only one block */
+ assert(size <= MMC_MAX_BLOCK_LEN);
+
+ /*
+ * We can use an assert() here since reading the wrong block will just
+ * cause invalid state to be (safely) read. If the crc passes, then we
+ * obtain invalid state and it will likely cause booting to fail.
+ *
+ * VBE relies on valid values being in U-Boot's devicetree, so this
+ * should not every be wrong on a production device.
+ */
+ assert(!(offset & (MMC_MAX_BLOCK_LEN - 1)));
+
+ if (offset & (MMC_MAX_BLOCK_LEN - 1))
+ return log_msg_ret("get", -EBADF);
+ offset /= MMC_MAX_BLOCK_LEN;
+
+ if (blk_read(blk, offset, 1, buf) != 1)
+ return log_msg_ret("read", -EIO);
+ nvd = (struct vbe_nvdata *)buf;
+ hdr_ver = (nvd->hdr & NVD_HDR_VER_MASK) >> NVD_HDR_VER_SHIFT;
+ hdr_size = (nvd->hdr & NVD_HDR_SIZE_MASK) >> NVD_HDR_SIZE_SHIFT;
+ if (hdr_ver != NVD_HDR_VER_CUR)
+ return log_msg_ret("hdr", -EPERM);
+ data_size = 1 << hdr_size;
+ if (!data_size || data_size > sizeof(*nvd))
+ return log_msg_ret("sz", -EPERM);
+
+ crc = crc8(0, buf + 1, data_size - 1);
+ if (crc != nvd->crc8)
+ return log_msg_ret("crc", -EPERM);
+
+ return 0;
+}
diff --git a/boot/vbe_common.h b/boot/vbe_common.h
index a122bead93e..37a81330325 100644
--- a/boot/vbe_common.h
+++ b/boot/vbe_common.h
@@ -78,4 +78,20 @@ int vbe_get_blk(const char *storage, struct udevice **blkp);
int vbe_read_version(struct udevice *blk, ulong offset, char *version,
int max_size);
+/**
+ * vbe_read_nvdata() - Read non-volatile data from a block device
+ *
+ * Reads the VBE nvdata from a device. This function reads a single block from
+ * the device, so the nvdata cannot be larger than that.
+ *
+ * @blk: Device to read from
+ * @offset: Offset to read, in bytes
+ * @size: Number of bytes to read
+ * @buf: Buffer to hold the data
+ * Return: 0 if OK, -E2BIG if @size > block size, -EBADF if the offset is not
+ * block-aligned, -EIO if an I/O error occurred, -EPERM if the header version
is
+ * incorrect, the header size is invalid or the data fails its CRC check
+ */
+int vbe_read_nvdata(struct udevice *blk, ulong offset, ulong size, u8 *buf);
+
#endif /* __VBE_ABREC_H */
diff --git a/boot/vbe_simple.c b/boot/vbe_simple.c
index ce385065321..c6766c532f2 100644
--- a/boot/vbe_simple.c
+++ b/boot/vbe_simple.c
@@ -18,48 +18,21 @@
#include <vbe.h>
#include <dm/device-internal.h>
#include <dm/ofnode.h>
-#include <u-boot/crc.h>
#include "vbe_simple.h"
static int simple_read_nvdata(const struct simple_priv *priv,
- struct udevice *blk, u8 *buf,
- struct simple_state *state)
+ struct udevice *blk, struct simple_state *state)
{
- uint hdr_ver, hdr_size, size, crc;
+ ALLOC_CACHE_ALIGN_BUFFER(u8, buf, MMC_MAX_BLOCK_LEN);
const struct vbe_nvdata *nvd;
- int start;
-
- /* we can use an assert() here since we already read only one block */
- assert(priv->state_size <= MMC_MAX_BLOCK_LEN);
-
- start = priv->area_start + priv->state_offset;
-
- /*
- * We can use an assert() here since reading the wrong block will just
- * cause invalid state to be (safely) read. If the crc passes, then we
- * obtain invalid state and it will likely cause booting to fail.
- *
- * VBE relies on valid values being in U-Boot's devicetree, so this
- * should not every be wrong on a production device.
- */
- assert(!(start & (MMC_MAX_BLOCK_LEN - 1)));
+ int ret;
- start /= MMC_MAX_BLOCK_LEN;
+ ret = vbe_read_nvdata(blk, priv->area_start + priv->state_offset,
+ priv->state_size, buf);
+ if (ret)
+ return log_msg_ret("nv", ret);
- if (blk_read(blk, start, 1, buf) != 1)
- return log_msg_ret("read", -EIO);
nvd = (struct vbe_nvdata *)buf;
- hdr_ver = (nvd->hdr & NVD_HDR_VER_MASK) >> NVD_HDR_VER_SHIFT;
- hdr_size = (nvd->hdr & NVD_HDR_SIZE_MASK) >> NVD_HDR_SIZE_SHIFT;
- if (hdr_ver != NVD_HDR_VER_CUR)
- return log_msg_ret("hdr", -EPERM);
- size = 1 << hdr_size;
- if (!size || size > sizeof(*nvd))
- return log_msg_ret("sz", -ENOEXEC);
-
- crc = crc8(0, buf + 1, size - 1);
- if (crc != nvd->crc8)
- return log_msg_ret("crc", -EPERM);
state->fw_vernum = nvd->fw_vernum;
log_debug("version=%s\n", state->fw_version);
@@ -69,7 +42,6 @@ static int simple_read_nvdata(const struct simple_priv *priv,
int vbe_simple_read_state(struct udevice *dev, struct simple_state *state)
{
- ALLOC_CACHE_ALIGN_BUFFER(u8, buf, MMC_MAX_BLOCK_LEN);
struct simple_priv *priv = dev_get_priv(dev);
struct udevice *blk;
int ret;
@@ -83,7 +55,7 @@ int vbe_simple_read_state(struct udevice *dev, struct
simple_state *state)
if (ret)
return log_msg_ret("ver", ret);
- ret = simple_read_nvdata(priv, blk, buf, state);
+ ret = simple_read_nvdata(priv, blk, state);
if (ret)
return log_msg_ret("nvd", ret);
--
2.34.1
