On Feb 05, 2025 at 05:30:11 +0100, Wadim Egorov wrote: > Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM > are accessible across all stages. This enables reading the SoM > configuration at any point during the boot process. > > Signed-off-by: Wadim Egorov <[email protected]> > Tested-by: Daniel Schultz <[email protected]> > --- > v2: Add Tested-by from Daniel > --- > arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi > b/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi > index 8f3c3a185ae..c68a48678a2 100644 > --- a/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi > +++ b/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi > @@ -72,6 +72,14 @@ > bootph-all; > }; > > +&main_i2c0 { > + bootph-all; > +}; > + > +&main_i2c0_pins_default { > + bootph-all; > +}; > +
Reviewed-by: Dhruva Gole <[email protected]> -- Best regards, Dhruva Gole Texas Instruments Incorporated
