On 2/24/25 19:39, Dario Binacchi wrote:
> It is pointless to use the custom compatible "st,led1" when
> stm32746g-eval.dts and stm32f769-disco.dts already contain the
> "gpio-leds" compatible, which is specifically used for GPIO LEDs
> management.
> 
> Signed-off-by: Dario Binacchi <[email protected]>
> 
> ---
> 
> Changes in v2:
> - Drop leds node from stm32f746-disco-u-boot.dtsi
> 
>  arch/arm/dts/stm32746g-eval-u-boot.dtsi    |  5 -----
>  arch/arm/dts/stm32f746-disco-u-boot.dtsi   |  5 -----
>  arch/arm/dts/stm32f769-disco-u-boot.dtsi   |  5 -----
>  board/st/stm32f746-disco/stm32f746-disco.c | 16 ----------------
>  4 files changed, 31 deletions(-)
> 
> diff --git a/arch/arm/dts/stm32746g-eval-u-boot.dtsi 
> b/arch/arm/dts/stm32746g-eval-u-boot.dtsi
> index f64329287357..32b5c7cea4b8 100644
> --- a/arch/arm/dts/stm32746g-eval-u-boot.dtsi
> +++ b/arch/arm/dts/stm32746g-eval-u-boot.dtsi
> @@ -22,11 +22,6 @@
>               mmc0 = &sdio1;
>               spi0 = &qspi;
>       };
> -
> -     led1 {
> -             compatible = "st,led1";
> -             led-gpio = <&gpiof 10 0>;
> -     };
>  };
>  
>  &fmc {
> diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi 
> b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
> index a79fca261a2c..38d797e49a0a 100644
> --- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
> +++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
> @@ -22,11 +22,6 @@
>               mmc0 = &sdio1;
>               spi0 = &qspi;
>       };
> -
> -     led1 {
> -             compatible = "st,led1";
> -             led-gpio = <&gpioi 1 0>;
> -     };
>  };
>  
>  &ltdc {
> diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi 
> b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
> index a50fba64dcd2..7c99a6e61b68 100644
> --- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi
> +++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
> @@ -23,11 +23,6 @@
>               spi0 = &qspi;
>       };
>  
> -     led1 {
> -             compatible = "st,led1";
> -             led-gpio = <&gpioj 5 0>;
> -     };
> -
>       panel: panel {
>               compatible = "orisetech,otm8009a";
>               reset-gpios = <&gpioj 15 1>;
> diff --git a/board/st/stm32f746-disco/stm32f746-disco.c 
> b/board/st/stm32f746-disco/stm32f746-disco.c
> index 65a39d965c72..72f479cea66f 100644
> --- a/board/st/stm32f746-disco/stm32f746-disco.c
> +++ b/board/st/stm32f746-disco/stm32f746-disco.c
> @@ -78,22 +78,6 @@ u32 spl_boot_device(void)
>  
>  int board_late_init(void)
>  {
> -     struct gpio_desc gpio = {};
> -     int node;
> -
> -     node = fdt_node_offset_by_compatible(gd->fdt_blob, 0, "st,led1");
> -     if (node < 0)
> -             return -1;
> -
> -     gpio_request_by_name_nodev(offset_to_ofnode(node), "led-gpio", 0, &gpio,
> -                                GPIOD_IS_OUT);
> -
> -     if (dm_gpio_is_valid(&gpio)) {
> -             dm_gpio_set_value(&gpio, 0);
> -             mdelay(10);
> -             dm_gpio_set_value(&gpio, 1);
> -     }
> -
>       return 0;
>  }
>  

Reviewed-by: Patrice Chotard <[email protected]>

Thanks
Patrice

Reply via email to