Hi,

On Wed, 05 Mar 2025 21:28:19 +0800 Alice Guo (OSS) wrote:
> From: Alice Guo <alice....@nxp.com>
> 
> Clock driver based on SCMI clock management protocol in Linux checks
> clock state, parent and rate control permissions. To be consistent with
> the kernel driver, add this check here.
> 
> When using common clock framework (CCF), use the clock signal ID to get
> the clock registered by clk_register() in scmi_clk_probe(), and then
> obatin the struct clk_scmi variable with container_of().
> 
> Signed-off-by: Alice Guo <alice....@nxp.com>
> Signed-off-by: Ye Li <ye...@nxp.com>
> Reviewed-by: Peng Fan <peng....@nxp.com>
> ---
>  drivers/clk/clk_scmi.c   | 173 
> +++++++++++++++++++++++++++++++++++++++++++----
>  include/scmi_protocols.h |  26 ++++++-
>  2 files changed, 186 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c
> index 84333cdd0c..d120c1eba0 100644
> --- a/drivers/clk/clk_scmi.c
> +++ b/drivers/clk/clk_scmi.c
> @@ -12,6 +12,56 @@
>  #include <asm/types.h>
>  #include <linux/clk-provider.h>
>  
> +struct clk_scmi {
> +     struct clk clk;
> +     u32 ctrl_flags;
> +};
> +
> +static int scmi_clk_get_permissions(struct udevice *dev, int clkid, u32 
> *perm)
> +{
> +     u32 version;
> +     int ret;
> +
> +     struct scmi_clk_get_permissions_in in = {
> +             .clock_id = clkid,
> +     };
> +     struct scmi_clk_get_permissions_out out;
> +     struct scmi_msg msg = {
> +             .protocol_id = SCMI_PROTOCOL_ID_CLOCK,
> +             .message_id = SCMI_CLOCK_GET_PERMISSIONS,
> +             .in_msg = (u8 *)&in,
> +             .in_msg_sz = sizeof(in),
> +             .out_msg = (u8 *)&out,
> +             .out_msg_sz = sizeof(out),
> +     };
> +
> +     ret = scmi_generic_protocol_version(dev, SCMI_PROTOCOL_ID_CLOCK, 
> &version);
> +     if (ret) {
> +             log_debug("%s: get SCMI clock management protocol version 
> failed\n", __func__);
> +             return ret;
> +     }
> +
> +     if (version < CLOCK_PROTOCOL_VERSION_3_0) {
> +             log_debug("%s: SCMI clock management protocol version is less 
> than 3.0.\n", __func__);
> +             return -EINVAL;
> +     }
> +
> +     ret = devm_scmi_process_msg(dev, &msg);
> +     if (ret) {
> +             log_debug("%s: get SCMI clock management protocol permissions 
> failed\n", __func__);
> +             return ret;
> +     }
> +
> +     ret = scmi_to_linux_errno(out.status);
> +     if (ret < 0) {
> +             log_debug("%s: the status code of getting permissions: %d\n", 
> __func__, ret);
> +             return ret;
> +     }
> +
> +     *perm = out.permissions;
> +     return 0;
> +}
> +
>  static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
>  {
>       struct scmi_clk_protocol_attr_out out;
> @@ -32,7 +82,8 @@ static int scmi_clk_get_num_clock(struct udevice *dev, 
> size_t *num_clocks)
>       return 0;
>  }
>  
> -static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> +static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name,
> +                              u32 *attr)
>  {
>       struct scmi_clk_attribute_in in = {
>               .clock_id = clkid,
> @@ -53,6 +104,7 @@ static int scmi_clk_get_attibute(struct udevice *dev, int 
> clkid, char **name)
>               return ret;
>  
>       *name = strdup(out.clock_name);
> +     *attr = out.attributes;
>  
>       return 0;
>  }
> @@ -78,12 +130,48 @@ static int scmi_clk_gate(struct clk *clk, int enable)
>  
>  static int scmi_clk_enable(struct clk *clk)
>  {
> -     return scmi_clk_gate(clk, 1);
> +     struct clk_scmi *clkscmi;
> +     struct clk *c;
> +     int ret;
> +
> +     if (!CONFIG_IS_ENABLED(CLK_CCF))
> +             return scmi_clk_gate(clk, 1);
> +
> +     ret = clk_get_by_id(clk->id, &c);
> +     if (ret)
> +             return ret;
> +
> +     clkscmi = container_of(c, struct clk_scmi, clk);
> +
> +     if (clkscmi->ctrl_flags & SUPPORT_CLK_STAT_CONTROL)
> +             return scmi_clk_gate(clk, 1);
> +
> +     /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent 
> has no permission. */
> +     log_debug("%s: SCMI CLOCK: the clock cannot be enabled by the 
> agent.\n", __func__);
> +     return 0;
>  }
>  
>  static int scmi_clk_disable(struct clk *clk)
>  {
> -     return scmi_clk_gate(clk, 0);
> +     struct clk_scmi *clkscmi;
> +     struct clk *c;
> +     int ret;
> +
> +     if (!CONFIG_IS_ENABLED(CLK_CCF))
> +             return scmi_clk_gate(clk, 0);
> +
> +     ret = clk_get_by_id(clk->id, &c);
> +     if (ret)
> +             return ret;
> +
> +     clkscmi = container_of(c, struct clk_scmi, clk);
> +
> +     if (clkscmi->ctrl_flags & SUPPORT_CLK_STAT_CONTROL)
> +             return scmi_clk_gate(clk, 0);
> +
> +     /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent 
> has no permission. */
> +     log_debug("%s: SCMI CLOCK: the clock cannot be disabled by the 
> agent.\n", __func__);
> +     return 0;
>  }
>  
>  static ulong scmi_clk_get_rate(struct clk *clk)
> @@ -108,7 +196,7 @@ static ulong scmi_clk_get_rate(struct clk *clk)
>       return (ulong)(((u64)out.rate_msb << 32) | out.rate_lsb);
>  }
>  
> -static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> +static ulong __scmi_clk_set_rate(struct clk *clk, ulong rate)
>  {
>       struct scmi_clk_rate_set_in in = {
>               .clock_id = clk->id,
> @@ -133,9 +221,32 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong 
> rate)
>       return scmi_clk_get_rate(clk);
>  }
>  
> +static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> +{
> +     struct clk_scmi *clkscmi;
> +     struct clk *c;
> +     int ret;
> +
> +     if (!CONFIG_IS_ENABLED(CLK_CCF))
> +             return __scmi_clk_set_rate(clk, rate);
> +
> +     ret = clk_get_by_id(clk->id, &c);
> +     if (ret)
> +             return ret;
> +
> +     clkscmi = container_of(c, struct clk_scmi, clk);
> +
> +     if (clkscmi->ctrl_flags & SUPPORT_CLK_RATE_CONTROL)
> +             return __scmi_clk_set_rate(clk, rate);
> +
> +     /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent 
> has no permission. */
> +     log_debug("%s: SCMI CLOCK: the clock rate cannot be changed by the 
> agent.\n", __func__);
> +     return 0;
> +}
> +
>  static int scmi_clk_probe(struct udevice *dev)
>  {
> -     struct clk *clk;
> +     struct clk_scmi *clk_scmi;
>       size_t num_clocks, i;
>       int ret;
>  
> @@ -156,29 +267,44 @@ static int scmi_clk_probe(struct udevice *dev)
>  
>       for (i = 0; i < num_clocks; i++) {
>               char *clock_name;
> +             u32 attributes;
>  
> -             if (!scmi_clk_get_attibute(dev, i, &clock_name)) {
> -                     clk = kzalloc(sizeof(*clk), GFP_KERNEL);
> -                     if (!clk || !clock_name)
> +             if (!scmi_clk_get_attibute(dev, i, &clock_name, &attributes)) {
> +                     clk_scmi = kzalloc(sizeof(*clk_scmi), GFP_KERNEL);
> +                     if (!clk_scmi || !clock_name)
>                               ret = -ENOMEM;
>                       else
> -                             ret = clk_register(clk, dev->driver->name,
> +                             ret = clk_register(&clk_scmi->clk, 
> dev->driver->name,
>                                                  clock_name, dev->name);
>  
>                       if (ret) {
> -                             free(clk);
> +                             free(clk_scmi);
>                               free(clock_name);
> +                             free(&attributes);
>                               return ret;
>                       }
>  
> -                     clk_dm(i, clk);
> +                     clk_dm(i, &clk_scmi->clk);
> +
> +                     if (CLK_HAS_RESTRICTIONS(attributes)) {
> +                             u32 perm;
> +
> +                             ret = scmi_clk_get_permissions(dev, i, &perm);
> +                             if (ret < 0)
> +                                     clk_scmi->ctrl_flags = 0;
> +                             else
> +                                     clk_scmi->ctrl_flags = perm;
> +                     } else {
> +                             clk_scmi->ctrl_flags = SUPPORT_CLK_STAT_CONTROL 
> | SUPPORT_CLK_PARENT_CONTROL |
> +                                                    SUPPORT_CLK_RATE_CONTROL;
> +                     }
>               }
>       }
>  
>       return 0;
>  }
>  
> -static int scmi_clk_set_parent(struct clk *clk, struct clk *parent)
> +static int __scmi_clk_set_parent(struct clk *clk, struct clk *parent)
>  {
>       struct scmi_clk_parent_set_in in = {
>               .clock_id = clk->id,
> @@ -197,6 +323,29 @@ static int scmi_clk_set_parent(struct clk *clk, struct 
> clk *parent)
>       return scmi_to_linux_errno(out.status);
>  }
>  
> +static int scmi_clk_set_parent(struct clk *clk, struct clk *parent)
> +{
> +     struct clk_scmi *clkscmi;
> +     struct clk *c;
> +     int ret;
> +
> +     if (!CONFIG_IS_ENABLED(CLK_CCF))
> +             return -ENOTSUPP;
> +
> +     ret = clk_get_by_id(clk->id, &c);
> +     if (ret)
> +             return ret;
> +
> +     clkscmi = container_of(c, struct clk_scmi, clk);
> +
> +     if (clkscmi->ctrl_flags & SUPPORT_CLK_PARENT_CONTROL)
> +             return __scmi_clk_set_parent(clk, parent);
> +
> +     /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent 
> has no permission. */
> +     log_debug("%s: SCMI CLOCK: the clock's parent cannot be changed by the 
> agent.\n", __func__);
> +     return 0;
> +}
> +
>  static const struct clk_ops scmi_clk_ops = {
>       .enable = scmi_clk_enable,
>       .disable = scmi_clk_disable,
> diff --git a/include/scmi_protocols.h b/include/scmi_protocols.h
> index 0d8c177025..2684f4177d 100644
> --- a/include/scmi_protocols.h
> +++ b/include/scmi_protocols.h
> @@ -731,13 +731,15 @@ int scmi_pwd_name_get(struct udevice *dev, u32 
> domain_id, u8 **name);
>  /*
>   * SCMI Clock Protocol
>   */
> +#define CLOCK_PROTOCOL_VERSION_3_0   0x30000
>  
>  enum scmi_clock_message_id {
>       SCMI_CLOCK_ATTRIBUTES = 0x3,
>       SCMI_CLOCK_RATE_SET = 0x5,
>       SCMI_CLOCK_RATE_GET = 0x6,
>       SCMI_CLOCK_CONFIG_SET = 0x7,
> -     SCMI_CLOCK_PARENT_SET = 0xD
> +     SCMI_CLOCK_PARENT_SET = 0xD,
> +     SCMI_CLOCK_GET_PERMISSIONS = 0xF
>
add a comma to facilitate extending the enum definition


Lothar Waßmann

Reply via email to