On 3/5/25 2:36 PM, Alice Guo (OSS) wrote: Hello Alice,
- Basically duplicate the mechanism in 7940a93eb977 ("net: phy: Iterate over both registered PHYs and struct phy_driver linker list"), call it e.g. U_BOOT_SCMI_DRIVER() - Switch SCMI drivers to use U_BOOT_SCMI_DRIVER , have each one list a protocol ID (instead of the PHY IDs), and then use the scmi_agent-uclass.c to iterate over all the linker lists About the MX95 specifics and handling those, it is possible to have two drivers which support the same hardware compiled into U-Boot and have them decide at bind time which driver should bind and which not, look at drivers/mtd/renesas_rpc_hf.c rpc_hf_probe() and drivers/spi/renesas_rpc_spi.c rpc_spi_bind() for example of doing this. I hope this helps untangle the SCMI implementation.Thank you for providing the example. Please review my patch set. https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
I will try to review this this week, I apologize for the delayed replies.
