hi there, I bought a Freescale MPC8313E-RDB some days before. The version of u-boot on that board is quite old and I wanna run a newer one. I have already built the latest git version of u-boot for that board. But I found there are several configuration files: > MPC8313ERDB_33 powerpc mpc83xx mpc8313erdb > freescale - MPC8313ERDB:SYS_33MHZ > MPC8313ERDB_66 powerpc mpc83xx mpc8313erdb > freescale - MPC8313ERDB:SYS_66MHZ > MPC8313ERDB_NAND_33 powerpc mpc83xx mpc8313erdb > freescale - MPC8313ERDB:SYS_33MHZ,NAND_U_BOOT > MPC8313ERDB_NAND_66 powerpc mpc83xx mpc8313erdb > freescale - MPC8313ERDB:SYS_66MHZ,NAND_U_BOOT
My board is Rev C and all switches are in factory default, could you tell me which configuration should I use? For I have no USBTAP, there are no way for me to flush either NOR Flash or NAND Flash, so I am afraid if I install my u-boot to NOR Flash and that u-boot cannot run correctly, my board would be unavailable. So I wanna boot the latest version of u-boot from the original one. I tried these: => tftp 0x01000000 u-boot.bin => go 0x01000000 But my board reset automatically. Could you tell me how to do with this? Thanks. -- 创业维艰，缅怀诸先烈。守成不易，莫徒务近功。 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
