Dear Simon Glass: > From: Ryan Mallon <[email protected]> > > Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20 > single board computer modules. Includes NAND flash and Ethernet > support. > > Signed-off-by: Ryan Mallon <[email protected]> > --- > Build and run tested with new changes. > > Changes for v5: > - Previous patch was accepted but mostly lost during the commit process > - This re-instates the lost bits from Ryan's patch > - Also ran through checkpatch to clean up warnings How then did this escape:
WARNING: please, no space before tabs #350: FILE: include/configs/snapper9260.h:39: +#define CONFIG_SYS_HZ ^I^I^I1000$ Fixed manually. > --- > MAINTAINERS | 5 + > board/bluewater/snapper9260/Makefile | 53 ++++++++ > board/bluewater/snapper9260/snapper9260.c | 169 +++++++++++++++++++++++++ > include/configs/snapper9260.h | 191 > +++++++++++++++++++++++++++++ > 4 files changed, 418 insertions(+), 0 deletions(-) > create mode 100644 board/bluewater/snapper9260/Makefile > create mode 100644 board/bluewater/snapper9260/snapper9260.c > create mode 100644 include/configs/snapper9260.h Applied to u-boot-atmel. Will show up later - MAKEALL at91 still running ;) Best Regards, Reinhard _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
