On 2025/3/29 23:06, Jonas Karlman wrote:
From: Simon Glass <[email protected]> The simple-bin image is normally written to MMC media at block 64, which is a 32K offset from start of storage media. Set the skip-at-start property to 0x8000 (32 KiB) so that fdtmap and other embedded binman symbols in the output binary is referencing image offsets correctly. Signed-off-by: Simon Glass <[email protected]> Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]> Thanks, - Kever
--- Changes in v4: - Drop defconfig changes - Split from "VBE serial part H: Implement VBE on Rockchip RK3399" Changes in v2: - Move this patch to the end of the series - Drop 0x8000 offset for SPI --- arch/arm/dts/rockchip-u-boot.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi index fb38b7b80c43..65b81bf58626 100644 --- a/arch/arm/dts/rockchip-u-boot.dtsi +++ b/arch/arm/dts/rockchip-u-boot.dtsi @@ -154,6 +154,7 @@ simple-bin { filename = "u-boot-rockchip.bin"; pad-byte = <0xff>; + skip-at-start = <0x8000>;mkimage {filename = "idbloader.img"; @@ -178,7 +179,7 @@ #else u-boot-img { #endif - offset = <CONFIG_SPL_PAD_TO>; + offset = <(CONFIG_SPL_PAD_TO + 0x8000)>; };fdtmap {
