The RB1 and RB2 have a single USB controller which is manually muxed
between a type-c port and an internal USB hub via a DIP switch. OTG is
supported in Linux, but the DWC3 driver in U-Boot can only handle a
single mode, and defaults to peripheral mode.
We did hack around this on the RB2, but the RB1 got left out.
Now that we can fix up the live tree before devices are bound, drop the
DTS hacks and do the fixup at runtime instead.
Reviewed-by: Sumit Garg <sumit.g...@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
Tested-by: Sumit Garg <sumit.g...@oss.qualcomm.com>
Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
arch/arm/dts/qrb4210-rb2-u-boot.dtsi | 6 ------
arch/arm/mach-snapdragon/of_fixup.c | 28 ++++++++++++++--------------
2 files changed, 14 insertions(+), 20 deletions(-)
diff --git a/arch/arm/dts/qrb4210-rb2-u-boot.dtsi
b/arch/arm/dts/qrb4210-rb2-u-boot.dtsi
deleted file mode 100644
index
7d1375f38c44d7bd54c022fa3d390f666a35d6ee..0000000000000000000000000000000000000000
--- a/arch/arm/dts/qrb4210-rb2-u-boot.dtsi
+++ /dev/null
@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/* This is usually OTG but U-Boot doesn't support that properly */
-&usb_dwc3 {
- dr_mode = "host";
-};
diff --git a/arch/arm/mach-snapdragon/of_fixup.c
b/arch/arm/mach-snapdragon/of_fixup.c
index
10053e48d88017d2179c96f2f3724c4d5dc4f3e2..b398c6b7b9fdaddc03324921e6b955919f9c7675
100644
--- a/arch/arm/mach-snapdragon/of_fixup.c
+++ b/arch/arm/mach-snapdragon/of_fixup.c
@@ -98,8 +98,21 @@ static int fixup_qcom_dwc3(struct device_node *root, struct
device_node *glue_np
log_err("Failed to set 'maximum-speed' property: %d\n", ret);
return ret;
}
+ /*
+ * The RB1/2 boards only have a single USB controller and it's muxed
between the type-C port
+ * and a USB hub. Since we can't do OTG in U-Boot properly we prefer to
put it into host mode.
+ */
+ if (of_device_is_compatible(root, "qcom,qrb4210-rb2", NULL, NULL) ||
+ of_device_is_compatible(root, "qcom,qrb2210-rb1", NULL, NULL)) {
+ ret = of_write_prop(dwc3, "dr_mode", sizeof("host"), "host");
+ if (ret) {
+ log_err("Failed to set 'dr_mode' property: %d\n", ret);
+ return ret;
+ }
+ }
+
return 0;
}
static void fixup_usb_nodes(struct device_node *root)
@@ -164,21 +177,8 @@ static int qcom_of_fixup_nodes(void * __maybe_unused ctx,
struct event *event)
}
EVENT_SPY_FULL(EVT_OF_LIVE_BUILT, qcom_of_fixup_nodes);
-int ft_board_setup(void *blob, struct bd_info __maybe_unused *bd)
+int ft_board_setup(void __maybe_unused *blob, struct bd_info __maybe_unused
*bd)
{
- struct fdt_header *fdt = blob;
- int node;
-
- /* On RB1/2 we need to fix-up the dr_mode */
- if (!fdt_node_check_compatible(fdt, 0, "qcom,qrb4210-rb2") ||
- !fdt_node_check_compatible(fdt, 0, "qcom,qrb2210-rb1")) {
- fdt_for_each_node_by_compatible(node, blob, 0, "snps,dwc3") {
- log_debug("%s: Setting 'dr_mode' to OTG\n",
fdt_get_name(blob, node, NULL));
- fdt_setprop_string(fdt, node, "dr_mode", "otg");
- break;
- }
- }
-
return 0;
}
--
2.49.0
