> -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Alexei Ozhigov > Sent: Wednesday, June 08, 2011 6:44 PM > To: [email protected] > Subject: [U-Boot] OpenRD: booting u-boot from NAND > > Hello! > > I am trying to launch U-Boot v2011.06-rc2 built with Codesourcery 2011 > toolchain on OpenRD Ultimate board with no luck so far. > After resetting the board hangs without any symbols being printed on > console. OpenOCD shows PC value of 0xFFFF0BA6 (not 4-byte aligned!) > after halting the core. > The strange thing is that the image boots up successfully if booted > from SDRAM. U-boot-1.1.4 with the patch from open-rd.org does boot > from NAND. > > > Any suggestions on why booting from NAND is not working?
Hi Alexey Ozhigov Which image you are flashing? You should create a target u-boot.kwb and use this image to flash on the NAND. I think you are flashing u-boot.bin, pls clarify Pls refer: docs/README.kwbimage for details. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
