On 22/05/2025 15:09, Eoin Dickson wrote: > From: Eoin Dickson <eoin.dick...@microchip.com> > > This series add SD card support for the Beagle-V-Fire. The Beagle-V-Fire uses > the > Microchip coreqspi xfer function and a gpio chip select, so this series adds > gpio > support for PolarFire SoC and the xfer function into the Microchip coreqspi > driver. > > Eoin Dickson (4): > gpio: add PolarFire SoC GPIO and Core GPIO driver > spi: coreqspi: add xfer function for PolarFire SoC
> configs: beaglev_fire: Enable GPIO and MMC_SPI > riscv: dts: microchip: enable gpio banks in Beagle-V Fire I think what you need/want gpio wise is already in dts/upstream/ but the config you're citing here doesn't exist in upstream yet, so in v2 either drop the beagle-v specific bits and just include the driver stuff or else bring the whole beaglev support along. The former might be a better option, since the platform support portion probably needs a wee chat with the TI folks about whther it goes with the "real" TI beagles or not.
