Hi Tom, On Fri, Jun 20, 2025 at 9:21 AM Tom Rini <[email protected]> wrote: > > This board is unmaintained. Remove it. > > Signed-off-by: Tom Rini <[email protected]> > --- > Cc: Stefan Roese <[email protected]> > Cc: Tony Dinh <[email protected]> > Cc: Luka Perkov <[email protected]> > --- > arch/arm/mach-kirkwood/Kconfig | 7 -- > board/raidsonic/ib62x0/Kconfig | 12 --- > board/raidsonic/ib62x0/MAINTAINERS | 6 -- > board/raidsonic/ib62x0/Makefile | 7 -- > board/raidsonic/ib62x0/ib62x0.c | 68 ------------- > board/raidsonic/ib62x0/ib62x0.h | 29 ------ > board/raidsonic/ib62x0/kwbimage.cfg | 153 ---------------------------- > configs/ib62x0_defconfig | 63 ------------ > include/configs/ib62x0.h | 34 ------- > 9 files changed, 379 deletions(-) > delete mode 100644 board/raidsonic/ib62x0/Kconfig > delete mode 100644 board/raidsonic/ib62x0/MAINTAINERS > delete mode 100644 board/raidsonic/ib62x0/Makefile > delete mode 100644 board/raidsonic/ib62x0/ib62x0.c > delete mode 100644 board/raidsonic/ib62x0/ib62x0.h > delete mode 100644 board/raidsonic/ib62x0/kwbimage.cfg > delete mode 100644 configs/ib62x0_defconfig > delete mode 100644 include/configs/ib62x0.h > > diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig > index f1ccedba5d74..ff53718f991c 100644 > --- a/arch/arm/mach-kirkwood/Kconfig > +++ b/arch/arm/mach-kirkwood/Kconfig > @@ -113,12 +113,6 @@ config TARGET_NETSPACE_V2 > select FEROCEON_88FR131 > select KIRKWOOD_COMMON > > -config TARGET_IB62X0 > - bool "ib62x0 Board" > - select FEROCEON_88FR131 > - select KW88F6281 > - select KIRKWOOD_COMMON > - > config TARGET_DOCKSTAR > bool "Dockstar Board" > select FEROCEON_88FR131 > @@ -190,7 +184,6 @@ source "board/d-link/dns325/Kconfig" > source "board/iomega/iconnect/Kconfig" > source "board/LaCie/net2big_v2/Kconfig" > source "board/LaCie/netspace_v2/Kconfig" > -source "board/raidsonic/ib62x0/Kconfig" > source "board/Seagate/dockstar/Kconfig" > source "board/Seagate/goflexhome/Kconfig" > source "board/Seagate/nas220/Kconfig" > diff --git a/board/raidsonic/ib62x0/Kconfig b/board/raidsonic/ib62x0/Kconfig > deleted file mode 100644 > index 129aac8b6d46..000000000000 > --- a/board/raidsonic/ib62x0/Kconfig > +++ /dev/null > @@ -1,12 +0,0 @@ > -if TARGET_IB62X0 > - > -config SYS_BOARD > - default "ib62x0" > - > -config SYS_VENDOR > - default "raidsonic" > - > -config SYS_CONFIG_NAME > - default "ib62x0" > - > -endif > diff --git a/board/raidsonic/ib62x0/MAINTAINERS > b/board/raidsonic/ib62x0/MAINTAINERS > deleted file mode 100644 > index 423aa0cf253a..000000000000 > --- a/board/raidsonic/ib62x0/MAINTAINERS > +++ /dev/null > @@ -1,6 +0,0 @@ > -IB62X0 BOARD > -M: Luka Perkov <[email protected]> > -S: Maintained > -F: board/raidsonic/ib62x0/ > -F: include/configs/ib62x0.h > -F: configs/ib62x0_defconfig > diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile > deleted file mode 100644 > index 3e6bc688e7af..000000000000 > --- a/board/raidsonic/ib62x0/Makefile > +++ /dev/null > @@ -1,7 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0+ > -# > -# (C) Copyright 2009 > -# Marvell Semiconductor <www.marvell.com> > -# Written-by: Prafulla Wadaskar <[email protected]> > - > -obj-y := ib62x0.o > diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c > deleted file mode 100644 > index 8d1d549a217c..000000000000 > --- a/board/raidsonic/ib62x0/ib62x0.c > +++ /dev/null > @@ -1,68 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0+ > -/* > - * Copyright (C) 2011-2012 > - * Gerald Kerma <[email protected]> > - * Luka Perkov <[email protected]> > - * Simon Baatz <[email protected]> > - */ > - > -#include <init.h> > -#include <miiphy.h> > -#include <asm/global_data.h> > -#include <asm/io.h> > -#include <asm/arch/cpu.h> > -#include <asm/arch/soc.h> > -#include <asm/arch/mpp.h> > -#include "ib62x0.h" > - > -DECLARE_GLOBAL_DATA_PTR; > - > -int board_early_init_f(void) > -{ > - /* > - * default gpio configuration > - * There are maximum 64 gpios controlled through 2 sets of registers > - * the below configuration configures mainly initial LED status > - */ > - mvebu_config_gpio(IB62x0_OE_VAL_LOW, > - IB62x0_OE_VAL_HIGH, > - IB62x0_OE_LOW, IB62x0_OE_HIGH); > - > - /* Set SATA activity LEDs to default off */ > - writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG); > - /* Multi-Purpose Pins Functionality configuration */ > - static const u32 kwmpp_config[] = { > - MPP0_NF_IO2, > - MPP1_NF_IO3, > - MPP2_NF_IO4, > - MPP3_NF_IO5, > - MPP4_NF_IO6, > - MPP5_NF_IO7, > - MPP6_SYSRST_OUTn, > - MPP8_TW_SDA, > - MPP9_TW_SCK, > - MPP10_UART0_TXD, > - MPP11_UART0_RXD, > - MPP18_NF_IO0, > - MPP19_NF_IO1, > - MPP20_SATA1_ACTn, > - MPP21_SATA0_ACTn, > - MPP22_GPIO, /* Power LED red */ > - MPP24_GPIO, /* Power off device */ > - MPP25_GPIO, /* Power LED green */ > - MPP27_GPIO, /* USB transfer LED */ > - MPP28_GPIO, /* Reset button */ > - MPP29_GPIO, /* USB Copy button */ > - 0 > - }; > - kirkwood_mpp_conf(kwmpp_config, NULL); > - return 0; > -} > - > -int board_init(void) > -{ > - /* adress of boot parameters */ > - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; > - > - return 0; > -} > diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h > deleted file mode 100644 > index 3690e13533ab..000000000000 > --- a/board/raidsonic/ib62x0/ib62x0.h > +++ /dev/null > @@ -1,29 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0+ */ > -/* > - * Copyright (C) 2011-2012 > - * Gerald Kerma <[email protected]> > - * Simon Baatz <[email protected]> > - * Luka Perkov <[email protected]> > - */ > - > -#ifndef __IB62x0_H > -#define __IB62x0_H > - > -#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27)) > -#define IB62x0_OE_HIGH (~(0)) > -#define IB62x0_OE_VAL_LOW 0 > -#define IB62x0_OE_VAL_HIGH 0 > - > -/* PHY related */ > -#define MV88E1116_LED_FCTRL_REG 10 > -#define MV88E1116_CPRSP_CR3_REG 21 > -#define MV88E1116_MAC_CTRL_REG 21 > -#define MV88E1116_PGADR_REG 22 > -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) > -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) > - > -/* SATAHC related */ > -#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C) > -#define MVSATAHC_LED_POLARITY_CTRL (1 << 3) > - > -#endif /* __IB62x0_H */ > diff --git a/board/raidsonic/ib62x0/kwbimage.cfg > b/board/raidsonic/ib62x0/kwbimage.cfg > deleted file mode 100644 > index 1249a0e4bc0a..000000000000 > --- a/board/raidsonic/ib62x0/kwbimage.cfg > +++ /dev/null > @@ -1,153 +0,0 @@ > -# SPDX-License-Identifier: GPL-2.0+ > -# > -# Copyright (C) 2011-2012 > -# Gerald Kerma <[email protected]> > -# Simon Baatz <[email protected]> > -# Luka Perkov <[email protected]> > -# Refer doc/README.kwbimage for more details about how-to configure > -# and create kirkwood boot image > -# > - > -# Boot Media configurations > -BOOT_FROM nand > -NAND_ECC_MODE default > -NAND_PAGE_SIZE 0x0800 > - > -# SOC registers configuration using bootrom header extension > -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed > - > -# Configure RGMII-0 interface pad voltage to 1.8V > -DATA 0xffd100e0 0x1b1b1b9b > - > -# Dram initalization for SINGLE x16 CL=5 @ 400MHz > -DATA 0xffd01400 0x43000c30 # DDR Configuration register > -# bit13-0: 0xc30, (3120 DDR2 clks refresh rate) > -# bit23-14: 0x0, > -# bit24: 0x1, enable exit self refresh mode on DDR access > -# bit25: 0x1, required > -# bit29-26: 0x0, > -# bit31-30: 0x1, > - > -DATA 0xffd01404 0x37543000 # DDR Controller Control Low > -# bit4: 0x0, addr/cmd in smame cycle > -# bit5: 0x0, clk is driven during self refresh, we don't care for APX > -# bit6: 0x0, use recommended falling edge of clk for addr/cmd > -# bit14: 0x0, input buffer always powered up > -# bit18: 0x1, cpu lock transaction enabled > -# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled > bit31=0 > -# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, > unbuffered DIMM > -# bit30-28: 0x3, required > -# bit31: 0x0, no additional STARTBURST delay > - > -DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1) > -# bit3-0: TRAS lsbs > -# bit7-4: TRCD > -# bit11-8: TRP > -# bit15-12: TWR > -# bit19-16: TWTR > -# bit20: TRAS msb > -# bit23-21: 0x0 > -# bit27-24: TRRD > -# bit31-28: TRTP > - > -DATA 0xffd0140c 0x00000a33 # DDR Timing (High) > -# bit6-0: TRFC > -# bit8-7: TR2R > -# bit10-9: TR2W > -# bit12-11: TW2W > -# bit31-13: 0x0, required > - > -DATA 0xffd01410 0x0000000c # DDR Address Control > -# bit1-0: 00, Cs0width (x8) > -# bit3-2: 11, Cs0size (1Gb) > -# bit5-4: 00, Cs1width (x8) > -# bit7-6: 11, Cs1size (1Gb) > -# bit9-8: 00, Cs2width (nonexistent) > -# bit11-10: 00, Cs2size (nonexistent) > -# bit13-12: 00, Cs3width (nonexistent) > -# bit15-14: 00, Cs3size (nonexistent) > -# bit16: 0, Cs0AddrSel > -# bit17: 0, Cs1AddrSel > -# bit18: 0, Cs2AddrSel > -# bit19: 0, Cs3AddrSel > -# bit31-20: 0x0, required > - > -DATA 0xffd01414 0x00000000 # DDR Open Pages Control > -# bit0: 0, OpenPage enabled > -# bit31-1: 0x0, required > - > -DATA 0xffd01418 0x00000000 # DDR Operation > -# bit3-0: 0x0, DDR cmd > -# bit31-4: 0x0, required > - > -DATA 0xffd0141c 0x00000c52 # DDR Mode > -# bit2-0: 0x2, BurstLen=2 required > -# bit3: 0x0, BurstType=0 required > -# bit6-4: 0x4, CL=5 > -# bit7: 0x0, TestMode=0 normal > -# bit8: 0x0, DLL reset=0 normal > -# bit11-9: 0x6, auto-precharge write recovery > -# bit12: 0x0, PD must be zero > -# bit31-13: 0x0, required > - > -DATA 0xffd01420 0x00000040 # DDR Extended Mode > -# bit0: 0, DDR DLL enabled > -# bit1: 0, DDR drive strenght normal > -# bit2: 1, DDR ODT control lsd (disabled) > -# bit5-3: 0x0, required > -# bit6: 0, DDR ODT control msb, (disabled) > -# bit9-7: 0x0, required > -# bit10: 0, differential DQS enabled > -# bit11: 0, required > -# bit12: 0, DDR output buffer enabled > -# bit31-13: 0x0, required > - > -DATA 0xffd01424 0x0000f17f # DDR Controller Control High > -# bit2-0: 0x7, required > -# bit3: 0x1, MBUS Burst Chop disabled > -# bit6-4: 0x7, required > -# bit7: 0x0, > -# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz > -# bit9: 0x0, no half clock cycle addition to dataout > -# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals > -# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh > -# bit15-12: 0xf, required > -# bit31-16: 0, required > - > -DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values) > -DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values) > - > -DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0 > -DATA 0xffd01504 0x0ffffff1 # CS[0]n Size > -# bit0: 0x1, Window enabled > -# bit1: 0x0, Write Protect disabled > -# bit3-2: 0x0, CS0 hit selected > -# bit23-4: 0xfffff, required > -# bit31-24: 0x0f, Size (i.e. 256MB) > - > -DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb > -DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled > - > -DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled > -DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled > - > -DATA 0xffd01494 0x00030000 # DDR ODT Control (Low) > -# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1 > -# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0 > -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 > -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 > - > -DATA 0xffd01498 0x00000000 # DDR ODT Control (High) > -# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above > -# bit3-2: 0x1, ODT1 active NEVER! > -# bit31-4: 0x0, required > - > -DATA 0xffd0149c 0x0000e803 # CPU ODT Control > -DATA 0xffd01480 0x00000001 # DDR Initialization Control > -# bit0: 0x1, enable DDR init upon this register write > - > -DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register > -DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register > - > -# End of Header extension > -DATA 0x0 0x0 > diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig > deleted file mode 100644 > index 1beb5837bb44..000000000000 > --- a/configs/ib62x0_defconfig > +++ /dev/null > @@ -1,63 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_SKIP_LOWLEVEL_INIT=y > -CONFIG_SYS_DCACHE_OFF=y > -CONFIG_ARCH_CPU_INIT=y > -CONFIG_ARCH_KIRKWOOD=y > -CONFIG_SYS_KWD_CONFIG="board/raidsonic/ib62x0/kwbimage.cfg" > -CONFIG_TEXT_BASE=0x600000 > -CONFIG_NR_DRAM_BANKS=2 > -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 > -CONFIG_TARGET_IB62X0=y > -CONFIG_ENV_SIZE=0x20000 > -CONFIG_ENV_OFFSET=0xE0000 > -CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-ib62x0" > -CONFIG_SYS_LOAD_ADDR=0x800000 > -CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0" > -CONFIG_BOOTDELAY=3 > -CONFIG_USE_BOOTCOMMAND=y > -CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; > ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload > 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; > bootz 0x800000 - 0x700000" > -CONFIG_USE_PREBOOT=y > -CONFIG_SYS_PBSIZE=1051 > -# CONFIG_DISPLAY_BOARDINFO is not set > -CONFIG_HUSH_PARSER=y > -CONFIG_SYS_PROMPT="ib62x0 => " > -CONFIG_SYS_MAXARGS=32 > -CONFIG_CMD_BOOTZ=y > -CONFIG_CMD_IDE=y > -CONFIG_CMD_NAND=y > -CONFIG_CMD_USB=y > -# CONFIG_CMD_SETEXPR is not set > -CONFIG_CMD_DHCP=y > -CONFIG_CMD_MII=y > -CONFIG_CMD_PING=y > -CONFIG_CMD_EXT2=y > -CONFIG_CMD_FAT=y > -CONFIG_CMD_JFFS2=y > -CONFIG_CMD_MTDPARTS=y > -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" > -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),-@0x100000(root)" > -CONFIG_CMD_UBI=y > -CONFIG_ISO_PARTITION=y > -CONFIG_OF_CONTROL=y > -CONFIG_ENV_OVERWRITE=y > -CONFIG_ENV_IS_IN_NAND=y > -CONFIG_SYS_RELOC_GD_ENV_ADDR=y > -CONFIG_NETCONSOLE=y > -CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y > -CONFIG_SYS_ATA_STRIDE=4 > -CONFIG_SYS_ATA_DATA_OFFSET=0x100 > -CONFIG_SYS_ATA_REG_OFFSET=0x100 > -CONFIG_SYS_ATA_ALT_OFFSET=0x100 > -CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 > -CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 > -CONFIG_LBA48=y > -# CONFIG_MMC is not set > -CONFIG_MTD=y > -CONFIG_MTD_RAW_NAND=y > -CONFIG_MVGBE=y > -CONFIG_MII=y > -CONFIG_USB=y > -CONFIG_USB_EHCI_HCD=y > -CONFIG_USB_STORAGE=y > -CONFIG_LZMA=y > -CONFIG_BZIP2=y > diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h > deleted file mode 100644 > index e1b62f78b21e..000000000000 > --- a/include/configs/ib62x0.h > +++ /dev/null > @@ -1,34 +0,0 @@ > -/* SPDX-License-Identifier: GPL-2.0+ */ > -/* > - * Copyright (C) 2011-2012 > - * Gerald Kerma <[email protected]> > - * Luka Perkov <[email protected]> > - */ > - > -#ifndef _CONFIG_IB62x0_H > -#define _CONFIG_IB62x0_H > - > -#include "mv-common.h" > - > -/* > - * Environment variables configuration > - */ > - > -/* > - * Default environment variables > - */ > - > -#define CFG_EXTRA_ENV_SETTINGS \ > - "console=console=ttyS0,115200\0" \ > - "kernel=/boot/zImage\0" \ > - "fdt=/boot/ib62x0.dtb\0" \ > - "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" > - > -/* > - * SATA driver configuration > - */ > -#ifdef CONFIG_IDE > -#define __io > -#endif /* CONFIG_IDE */ > - > -#endif /* _CONFIG_IB62x0_H */ > -- > 2.43.0 >
Please keep this. Even though I don't have this board, we can use the Marvell Dreamplug as the surrogate for testing just fine. I'll send in patches to modernize it and remove JFFS2. All the best, Tony
