Dear Simon Schwarz, please don't use TOFU, use inline quoting and also send to the list.
Am 17.06.2011 um 17:18 schrieb Simon Schwarz: > Dear Andreas, > > i tried setting it - but this should be already working code - > therefore if I have to set the values manually it is very likely that > I did something wrong while adapting it for the SPL. Sounds correct. > I can't find > anything in the devkit8000 implementation which sets these values - > and NAND is working nonetheless. Yes, armv7 start.S initializes .bss to zero in normal case (after relocation -> see clear_bss). Is that called in your case (SPL with not mainline code) too? > nand_chip is in bss (which is in RAM). IMHO this shouldn't be a > problem because RAM is initialized before, right? Yes, if it is initialized correctly (zero out the bss section!), remember our talk some days ago. But I just guessing cause of your statement 'the function pointer are initialized to garbage' in your first mail, it may be a completely other cause. Please let us know what it was. regards Andreas Bießmann _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
