[PATCH v1 14/34] ddr: altera: agilex: Get ACF from boot scratch register

[alif . zakuan . yuslaimi]

From: Alif Zakuan Yuslaimi <alif.zakuan.yusla...@altera.com>

The DDR data rate must be set correctly in the DDRIOCTRL
register according to the Actual Clock Frequency (ACF) value.

By enabling the reading of ACF value from bit 18 of the boot
scratch register during initialization, the DDR data rate is
able to be configured accurately.

Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yusla...@altera.com>
---
 .../include/mach/system_manager_soc64.h            |  3 +++
 drivers/ddr/altera/sdram_agilex.c                  | 14 ++++++++++++--
 drivers/ddr/altera/sdram_soc64.h                   |  2 ++
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h 
b/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h
index 8e12aeec011..0871cf949e5 100644
--- a/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h
+++ b/arch/arm/mach-socfpga/include/mach/system_manager_soc64.h
@@ -148,11 +148,14 @@ void populate_sysmgr_pinmux(void);
  * Bit[30] reserved for FSBL to update the DDR init progress
  * 1 - means in progress, 0 - haven't started / DDR is up running.
  *
+ * Bit[18] reserved for SDM to configure ACF
  * Bit[17:1] - Setting by Linux EDAC.
  * Bit[1](ECC_OCRAM), Bit[16](ECC_DDR0), Bit[17](ECC_DDR1)
  */
 #define ALT_SYSMGR_SCRATCH_REG_8_DDR_DBE_MASK  BIT(31)
 #define ALT_SYSMGR_SCRATCH_REG_8_DDR_PROGRESS_MASK     BIT(30)
+#define SYSMGR_SCRATCH_REG_8_ACF_DDR_RATE_MASK BIT(18)
+#define SYSMGR_SCRATCH_REG_8_ACF_DDR_RATE_SHIFT 18
 
 #define SYSMGR_SDMMC                           SYSMGR_SOC64_SDMMC
 
diff --git a/drivers/ddr/altera/sdram_agilex.c 
b/drivers/ddr/altera/sdram_agilex.c
index e4655877a78..b36a765a5de 100644
--- a/drivers/ddr/altera/sdram_agilex.c
+++ b/drivers/ddr/altera/sdram_agilex.c
@@ -73,12 +73,22 @@ int sdram_mmr_init_full(struct udevice *dev)
         */
        /* Configure DDR IO size x16, x32 and x64 mode */
        u32 update_value;
+       u32 reg;
 
        update_value = hmc_readl(plat, NIOSRESERVED0);
        update_value = (update_value & 0xFF) >> 5;
 
-       /* Configure DDR data rate 0-HAlf-rate 1-Quarter-rate */
-       update_value |= (hmc_readl(plat, CTRLCFG3) & 0x4);
+       /* Read ACF from boot_scratch_cold_8 register bit[18]*/
+       reg = readl(socfpga_get_sysmgr_addr() +
+                   SYSMGR_SOC64_BOOT_SCRATCH_COLD8);
+       reg = ((reg & SYSMGR_SCRATCH_REG_8_ACF_DDR_RATE_MASK)
+              >> SYSMGR_SCRATCH_REG_8_ACF_DDR_RATE_SHIFT);
+
+       /* bit-2 of DDRIOCTRL: Configure DDR data rate 0-Half-rate 
1-Quarter-rate */
+       clrsetbits_le32(&update_value,
+                       DDR_HMC_DDRIOCTRL_MPFE_HMCA_DATA_RATE_MSK,
+                       reg << DDR_HMC_DDRIOCTRL_MPFE_HMCA_DATA_RATE_SHIFT);
+
        hmc_ecc_writel(plat, update_value, DDRIOCTRL);
 
        /* Copy values MMR IOHMC dramaddrw to HMC adp DRAMADDRWIDTH */
diff --git a/drivers/ddr/altera/sdram_soc64.h b/drivers/ddr/altera/sdram_soc64.h
index 183b1a33080..4c1205b63b6 100644
--- a/drivers/ddr/altera/sdram_soc64.h
+++ b/drivers/ddr/altera/sdram_soc64.h
@@ -48,6 +48,8 @@ struct altera_sdram_plat {
 #define RSTHANDSHAKESTAT               0x218
 
 #define DDR_HMC_DDRIOCTRL_IOSIZE_MSK           0x00000003
+#define DDR_HMC_DDRIOCTRL_MPFE_HMCA_DATA_RATE_MSK BIT(2)
+#define DDR_HMC_DDRIOCTRL_MPFE_HMCA_DATA_RATE_SHIFT 2
 #define DDR_HMC_DDRCALSTAT_CAL_MSK             BIT(0)
 #define DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK     BIT(16)
 #define DDR_HMC_ECCCTL_CNT_RST_SET_MSK         BIT(8)
-- 
2.35.3