In mv88e6xxx_port_enable when attempting to mask out the previous
settings of two bits a logical operator was used instead of a bitwise
operator. Fix this.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodb...@linaro.org>
---
drivers/net/mv88e6xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/mv88e6xxx.c b/drivers/net/mv88e6xxx.c
index 557b6b2c8f6..f06c73c20f8 100644
--- a/drivers/net/mv88e6xxx.c
+++ b/drivers/net/mv88e6xxx.c
@@ -631,7 +631,7 @@ static int mv88e6xxx_port_enable(struct udevice *dev, int
port, struct phy_devic
dev_dbg(dev, "configure internal RGMII delays\n");
/* RGMII delays */
- val &= ~(PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK ||
+ val &= ~(PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK |
PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK);
if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phy->interface == PHY_INTERFACE_MODE_RGMII_RXID)
---
base-commit: 007610da2cca405ea7739fc120d90085be4b6ac2
change-id: 20250805-mv88e6xxx-f1f89dc9476b
Best regards,
--
Andrew Goodbody <andrew.goodb...@linaro.org>
